John P. Stegemeier | USGS Science

USGS2017

Effects of sulfide concentration and dissolved organic matter characteristics on the structure of nanocolloidal metacinnabar

Understanding the speciation of divalent mercury (Hg(II)) in aquatic systems containing dissolved organic matter (DOM) and sulfide is necessary to predict the conversion of Hg(II) to bioavailable methylmercury. We used X-ray absorption spectroscopy to characterize the structural order of mercury in Hg(II)–DOM–sulfide systems for a range of sulfide concentration (1–100 μM), DOM aromaticity (specific ultraviolet absorbance (SUVA 254 )), and Hg(II)–DOM and Hg(II)–DOM–sulfide equilibration times (4–142 h). In all systems, Hg(II) was present as structurally disordered nanocolloidal metacinnabar (β-HgS). β-HgS nanocolloids were significantly smaller or less ordered at lower sulfide concentration, as indicated by under-coordination of Hg(II) in β-HgS. The size or structural order of β-HgS nanocolloids increased with increasing sulfide abundance and decreased with increasing SUVA 254 of the DOM. The Hg(II)–DOM or Hg(II)–DOM–sulfide equilibration times did not significantly influence the extent of structural order in nanocolloidal β-HgS. Geochemical factors that control the structural order of nanocolloidal β-HgS, which are expected to influence nanocolloid surface reactivity and solubility, should be considered in the context of mercury bioavailability.

Environmental Science & Technology↗

USGS2011

Formation of nanocolloidal metacinnabar in mercury-DOM-sulfide systems

Direct determination of mercury (Hg) speciation in sulfide-containing environments is confounded by low mercury concentrations and poor analytical sensitivity. Here we report the results of experiments designed to assess mercury speciation at environmentally relevant ratios of mercury to dissolved organic matter (DOM) (i.e., <4 nmol Hg (mg DOM) −1 ) by combining solid phase extraction using C 18 resin with extended X-ray absorption fine structure (EXAFS) spectroscopy. Aqueous Hg(II) and a DOM isolate were equilibrated in the presence and absence of 100 μM total sulfide. In the absence of sulfide, mercury adsorption to the resin increased as the Hg:DOM ratio decreased and as the strength of Hg-DOM binding increased. EXAFS analysis indicated that in the absence of sulfide, mercury bonds with an average of 2.4 ± 0.2 sulfur atoms with a bond length typical of mercury-organic thiol ligands (2.35 Å). In the presence of sulfide, mercury showed greater affinity for the C 18 resin, and its chromatographic behavior was independent of Hg:DOM ratio. EXAFS analysis showed mercury–sulfur bonds with a longer interatomic distance (2.51–2.53 Å) similar to the mercury–sulfur bond distance in metacinnabar (2.53 Å) regardless of the Hg:DOM ratio. For all samples containing sulfide, the sulfur coordination number was below the ideal four-coordinate structure of metacinnabar. At a low Hg:DOM ratio where strong binding DOM sites may control mercury speciation (1.9 nmol mg –1 ) mercury was coordinated by 2.3 ± 0.2 sulfur atoms, and the coordination number rose with increasing Hg:DOM ratio. The less-than-ideal coordination numbers indicate metacinnabar-like species on the nanometer scale, and the positive correlation between Hg:DOM ratio and sulfur coordination number suggests progressively increasing particle size or crystalline order with increasing abundance of mercury with respect to DOM. In DOM-containing sulfidic systems nanocolloidal metacinnabar-like species may form, and these species need to be considered when addressing mercury biogeochemistry.

Environmental Science & Technology↗