USGS Science⌕ Search

Geology topics

John L. Dwyer

Publications and source records attributed to John L. Dwyer.

At least 37 records · Page 2Linked to original sources
USGS2006

The MODIS reprojection tool

The MODIS Reprojection Tool (MRT) is designed to help individuals work with MODIS Level-2G, Level-3, and Level-4 land data products. These products are referenced to a global tiling scheme in which each tile is approximately 10° latitude by 10° longitude and non-overlapping (Fig. 9.1). If desired, the user may reproject only selected portions of the product (spatial or parameter subsetting). The software may also be used to convert MODIS products to file formats (generic binary and GeoTIFF) that are more readily compatible with existing software packages. The MODIS land products distributed by the Land Processes Distributed Active Archive Center (LP DAAC) are in the Hierarchical Data Format - Earth Observing System (HDF-EOS), developed by the National Center for Supercomputing Applications at the University of Illinois at Urbana Champaign for the NASA EOS Program. Each HDF-EOS file is comprised of one or more science data sets (SDSs) corresponding to geophysical or biophysical parameters. Metadata are embedded in the HDF file as well as contained in a .met file that is associated with each HDF-EOS file. The MRT supports 8-bit, 16-bit, and 32-bit integer data (both signed and unsigned), as well as 32-bit float data. The data type of the output is the same as the data type of each corresponding input SDS.

Book chapter↗
USGS2005

Multi-platform comparisons of MODIS and AVHRR normalized difference vegetation index data

The relationship between AVHRR-derived normalized difference vegetation index (NDVI) values and those of future sensors is critical to continued long-term monitoring of land surface properties. The follow-on operational sensor to the AVHRR, the Visible/Infrared Imager/Radiometer Suite (VIIRS), will be very similar to the NASA Earth Observing System's Moderate Resolution Imaging Spectroradiometer (MODIS) sensor. NDVI data derived from visible and near-infrared data acquired by the MODIS (Terra and Aqua platforms) and AVHRR (NOAA-16 and NOAA-17) sensors were compared over the same time periods and a variety of land cover classes within the conterminous United States. The results indicate that the 16-day composite NDVI values are quite similar over the composite intervals of 2002 and 2003, and linear relationships exist between the NDVI values from the various sensors. The composite AVHRR NDVI data included water and cloud masks and adjustments for water vapor as did the MODIS NDVI data. When analyzed over a variety of land cover types and composite intervals, the AVHRR derived NDVI data were associated with 89% or more of the variation in the MODIS NDVI values. The results suggest that it may be possible to successfully reprocess historical AVHRR data sets to provide continuity of NDVI products through future sensor systems.

Remote Sensing of Environment↗
USGS2004

Comparison of MODIS and AVHRR 16-day normalized difference vegetation index composite data

Normalized difference vegetation index (NDVI) data derived from visible and near-infrared data acquired by the MODIS and AVHRR sensors were compared over the same time periods and a variety of land cover classes within the conterminous USA. The relationship between the AVHRR derived NDVI values and those of future sensors is critical to continued long term monitoring of land surface properties. The results indicate that the 16-day composite values are quite similar over the 23 intervals of 2001 that were analyzed, and a linear relationship exists between the NDVI values from the two sensors. The composite AVHRR NDVI data were associated with over 90% of the variation in the MODIS NDVI values. Copyright 2004 by the American Geophysical Union.

Geophysical Research Letters↗
USGS2004

Global land ice measurements from space (GLIMS): remote sensing and GIS investigations of the Earth's cryosphere

Concerns over greenhouse‐gas forcing and global temperatures have initiated research into understanding climate forcing and associated Earth‐system responses. A significant component is the Earth's cryosphere, as glacier‐related, feedback mechanisms govern atmospheric, hydrospheric and lithospheric response. Predicting the human and natural dimensions of climate‐induced environmental change requires global, regional and local information about ice‐mass distribution, volumes, and fluctuations. The Global Land‐Ice Measurements from Space (GLIMS) project is specifically designed to produce and augment baseline information to facilitate glacier‐change studies. This requires addressing numerous issues, including the generation of topographic information, anisotropic‐reflectance correction of satellite imagery, data fusion and spatial analysis, and GIS‐based modeling. Field and satellite investigations indicate that many small glaciers and glaciers in temperate regions are downwasting and retreating, although detailed mapping and assessment are still required to ascertain regional and global patterns of ice‐mass variations. Such remote sensing/GIS studies, coupled with field investigations, are vital for producing baseline information on glacier changes, and improving our understanding of the complex linkages between atmospheric, lithospheric, and glaciological processes.

Geocarto International↗
USGS1999

The EOS land validation core sites: background information and current status

The EOS Land Validation Core Sites1 will provide the user community with timely ground, aircraft, and satellite data for EOS science and validation investigations. The sites, currently 24 distributed worldwide, represent a consensus among the instrument teams and validation investigators and represent a range of global biome types (see Figure 1 and Table 1; Privette et al., 1999; Justice et al., 1998). The sites typically have a history of in situ and remote observations and can expect continued monitoring and land cover research activities. In many cases, a Core Site will have a tower equipped with above-canopy instrumentation for nearcontinuous sampling of landscape radiometric, energy and CO2 flux, meteorological variables, and atmospheric aerosol and water vapor data. These will be complemented by intensive field measurement campaigns. The data collected at these sites will provide an important resource for the broader science community. These sites can also provide a foundation for a validation network supported and used by all international space agencies.

The Earth Observer↗
USGS1998

North American landscape characterization project: The production of a continental scale three-decade Landsat data set

The North American Landscape Characterization (NALC) project is a component of the National Aeronautics and Space Administration (NASA) Landsat Pathfinder program. Pathfinder projects are focused on the investigation of global change utilizing current remote sensing technologies. The NALC project is a cooperative effort between the U. S. Environmental Protection Agency (EPA), the U.S. Geological Survey (USGS), and NASA to make Landsat data available to the widest possible user community for scientific research and general public interest. The NALC project is principally funded by the EPA Office of Research and Development and the USGS's Earth Resources Observation Systems (EROS) Data Center (EDC). The objectives of the NALC project are to produce standardized remote sensing data sets, develop standardized analysis methods, and derive standardized land cover change products for a large portion of the North American continent (the conterminous United States and Mexico) (Lunetta and Sturdevant, 1993). The standard product is the NALC “triplicate”;, consisting of co‐registered Landsat multispectral scanner data for the years 1973, 1986, and 1991 (plus or minus one year), plus co‐registered 3 arcsecond digital terrain elevation data. Processing began with the 1986 scene, which was precision corrected (with full terrain correction) to a 60 meter Universal Transverse Mercator base. Automated cross‐correlation procedures were used to co‐register the 1970's and 1990's data to the 1980's base, and independent verifications of registration quality were performed on all triplicate components. The pertinent metadata were compiled in a relational database, which includes WRS2 path/rows, scene ID's, image dates, solar azimuth and elevation, verification RMSE's, and the number of verification control points. NALC triplicate data sets are being used for a number of applications, including the analysis of urbanization patterns, dynamics of climatic fluctuations, deforestation studies, and vegetation classification and mapping. These data are being distributed through the Earth Observing System Data and Information System (EOSDIS) Information Management System (IMS) at a cost of $15(U.S.) for each triplicate.

Geocarto International↗
USGS1995

Effects of empirical versus model-based reflectance calibration on automated analysis of imaging spectrometer data: a case study from the Drum Mountains, Utah

Data collected by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) have been calibrated to surface reflectance using an empirical method and an atmospheric model-based method. Single spectra extracted from both calibrated data sets for locations with known mineralogy compared favorably with laboratory and field spectral measurements of samples from the same locations. Generally, spectral features were somewhat subdued in data calibrated using the model-based method when compared with those calibrated using the empirical method. Automated feature extraction and expert system analysis techniques have been successfully applied to both data sets to produce similar endmember probability images and spectral endmember libraries. Linear spectral unmixing procedures applied to both calibrated data sets produced similar image maps. These comparisons demonstrated the utility of the model-based approach for atmospherically correcting imaging spectrometer data prior to extraction of scientific information. The results indicated that imaging spectrometer data can be calibrated and analyzed without a priori knowledge of the remote target.

Photogrammetric Engineering and Remote Sensing↗
USGS1993

Maps showing mineral resource assessment for porphyry and stockwork deposits of copper, molybdenum, and tungsten and for stockwork and disseminated deposits of gold and silver in the Butte 1° x 2° quadrangle, Montana

This report documents the assessment for potential occurrences of undiscovered porphyry and stockwork deposits of copper, molybdenum, and tungsten (porphyry Cu-Mo-W) and stockwork and disseminated deposits of gold and silver (disseminated Au-Ag) in the Butte 1 °X2° quadrangle. The Butte quadrangle, in west-central Montana, is one of the best known mineral producing regions in the U.S. Mining districts in the quadrangle, including the world famous Butte or Summit Valley district, have produced a variety of metallic and nonmetallic mineral commodities valued at more than $6.4 billion (at the time of production). Because of its importance as a mineral producing region, the Butte quadrangle was selected for study by the U.S. Geological Survey under the Conterminous United States Mineral Assessment Program (CUSMAP). Under this program, new data on geology, geochemistry, geophysics, geochronology, mineral resources, and remote sensing were collected and synthesized. The field and laboratory studies were supported, in part, by funding from the Geologic Framework and Synthesis Program and the Wilderness Program. The methods used in this resource assessment for porphyry Cu-Mo-W and disseminated Au-Ag deposits in the quadrangle include a compilation of all data, the development of descriptive occurrence models, and the analysis of data using techniques provided by a Geographic Information System (GIS). This map is one of several maps on the Butte 1 °X2° quadrangle. Other deposit types have been assessed for the Butte quadrangle, and maps (U.S. Geological Survey (USGS) Miscellaneous Investigation Series Maps) for each of the following have been prepared: Vein and replacement deposits of gold, silver, copper, lead, zinc, manganese, and tungsten (Elliott, Wallace, and others, 1992a) and skarn deposits of gold, silver, copper, tungsten, and iron (Elliott and others, 1992b ). Other publications resulting from this study include linear features map (Rowan and others, 1991 ); limonite and hydrothermal alteration map (Rowan and Segal, 1989); mineral occurrence maps (Elliott and others, 1986; Elliott, Loen, and others, 1992); and geologic maps (Wallace, 1987; Wallace and others, 1987).

Montana↗
USGS1991

Techniques and strategies for data integration in mineral resource assessment

The Geologic and the National Mapping divisions of the U.S. Geological Survey have been involved formally in cooperative research and development of computer-based geographic information systems (GISs) applied to mineral-resource assessment objectives since 1982. Experience in the Conterminous United States Mineral Assessment Program (CUSMAP) projects including the Rolla, Missouri; Dillon, Montana; Butte, Montana; and Tonopah, Nevada 1?? ?? 2?? quadrangles, has resulted in the definition of processing requirements for geographically and mineral-resource data that are common to these studies. The diverse formats of data sets collected and compiled for regional mineral-resource assessments necessitate capabilities for digitally encoding and entering data into appropriate tabular, vector, and raster subsystems of the GIS. Although many of the required data sets are either available or can be provided in a digital format suitable for direct entry, their utility is largely dependent on the original intent and consequent preprocessing of the data. In this respect, special care must be taken to ensure the digital data type, encoding, and format will meet assessment objectives. Data processing within the GIS is directed primarily toward the development and application of models that can be used to describe spatially geological, geophysical, and geochemical environments either known or inferred to be associated with specific types of mineral deposits. Consequently, capabilities to analyze spatially, aggregate, and display relations between data sets are principal processing requirements. To facilitate the development of these models within the GIS, interfaces must be developed among vector-, raster-, and tabular-based processing subsystems to reformat resident data sets for comparative analyses and multivariate display of relations.

Conference Paper↗
USGS1985

Landsat multispectral scanner and Landsat thematic mapper images and interpretations of Hannapah and the Royston Hills, Nevada

This Open-File Report consists of twenty-one 35-mm slides showing material that was presented at the Fourth Thematic Conference on Remote Sensing of the Environment held in San Francisco, California on April 1-4, 1985 (Purdy and others, 1985). The work was carried out in conjunction with the U.S. Geological Survey's Conterminous U.S. Mineral Appraisal Program for the Tonopah, Nevada 1° by 2° quadrangle (fig. 1). The slides show Landsat Multispectral Scanner (MSS) images, Landsat Thematic Mapper (TM) images, and geologic interpretations made from these data.

Nevada↗