USGS Science⌕ Search

Geology topics

John H. Guswa

Publications and source records attributed to John H. Guswa.

4 recordsLinked to original sources
USGS1985

Digital models of ground-water flow in the Cape Cod aquifer system, Massachusetts

The Cape Cod aquifer system was simulated with three-dimensional finite-difference ground-water-flow models. Five areas were modeled to provide tools that can be used to evaluate the hydrologic impacts of regional water development and waste disposal. The model boundaries were selected to represent the natural hydrologic boundaries of the aquifer. The boundary between fresh and saline ground water was treated as an interface along which there is no dispersion. The saline-water zone was treated as static (nonflowing). Comparisons of calculated and observed values of head, position of the boundary between fresh and saline water, and ground-water discharge (at locations where data were available) indicate that the simulated groundwater reservoirs generally agree with field conditions. Model analyses indicate that the total steady-state freshwater-flow rate through the five modeled areas is approximately 412 cubic feet per second.

Water Supply Paper↗
USGS1982

Preliminary evaluation of the ground-water-flow system in the Twin Cities Metropolitan area, Minnesota

A preliminary quasi-three-dimensional finite-difference ground-water-flow model of the seven-county Twin Cities Metropolitan area was constructed and used to evaluate parameter sensitivity and adequacy of available data. Fourteen geologic units that underlie the study area were grouped into nine hydr,bgeologic units and were incorporated into a five-layer model. The layers in the simulation model include the Mount SimonHinckley, Ironton-Galesville, Prairie du Chien-Jordan, and St. Peter aquifers, and the drift. Sensitivity analyses were made for 19 parameter and boundary-condition specifications. Model results are -most sensitive to recharge and withdrawal rates and to hydrogeologic variations related to drift-filled bedrock valleys. Analyses of available data and results of steady-state simulations indicate that critical data needs for improving the simulation model include spatial and temporal variations in ground-water withdrawals and potentiometric levels, and hydraulic properties of drift filling or partly filling bedrock valleys. Areal distribution of calcium, sodium, sulfate, and chloride concentrations were analyzed to provide information on the hydrologic and geochemical relationships between aquifers. Ground water is generally of the calcium magnesium bicarbonate type. Concentration of dissolved solids in water from the Jordan Sandstone and Mount Simon-Hinckley aquifer generally decreases from southwest to northeast across the study area. This decrease probably reflects differences in the quality of recharge water and geochemical processes within the aquifers, such as ion exchange.

Minnesota↗
USGS1981

Digital models of ground-water flow in the Cape Cod aquifer system, Massachusetts

The Cape Cod aquifer system was simulated with three-dimensional finite-difference ground-water-flow models. Five areas were modeled to provide tools that can be used to evaluate the hydrologic impacts of regional water development and waste disposal. The model boundaries were selected to represent the natural hydrologic boundaries of the aquifer. The boundary between fresh and saline ground water is treated as an interface along which there is no dispersion. The saline-water zone is treated as static (nonflowing). Comparisons of calculated and observed values of head, position of the boundary between fresh and saline water, and ground-water discharge at locations where data are available indicate that the simulated ground-water reservoirs generally agree with field conditions. Model analyses indicate that the total steady-state freshwater-flow rate through the five modeled areas is approximately 412 cubic feet per second.

Massachusetts↗