USGS Science⌕ Search

Geology topics

John H. Bullock

Publications and source records attributed to John H. Bullock.

At least 19 recordsLinked to original sources
USGS2007

Performance audit of the U.S. Geological Survey, energy resource program inorganic geochemistry laboratory

A performance audit of the U.S. Geological Survey (USGS), Energy Resource Program (ERP) Inorganic Geochemistry Laboratory (IGL) was conducted between August, 2003 and October, 2005. The goals were to ensure that a high level of analytical performance was maintained and identify any areas that could be enhanced. The audit was subdivided into three phases. Phase 1 was a preliminary assessment of current performance based on recent performance on CANSPEX samples. IGL performance was also compared to laboratories world-wide with similar scope. Phase 2 consisted of the implementation of the recommended changes made in Phase 1. Phase 3 of the audit consisted of a reassessment effort to evaluate the effectiveness of the recommendations made in the Phase 1 and an on-site audit of the laboratory facilities. Phases 1 and 3 required summary reports that are included in Appendices A and B of this report. The audit found that the IGL was one of the top two laboratories compared for trace element analyses. Several recommendations to enhance performance on major and minor elemental parameters were made and implemented. Demonstrated performance improvements as a result of the recommended changes were documented. Several initiatives to sustain the performance improvements gained from the audit have been implemented.

Open-File Report↗
USGS2006

Chemical analyses of coal, coal-associated rocks and coal combustion products collected for the National Coal Quality Inventory

In 1999, the USGS initiated the National Coal Quality Inventory (NaCQI) project to address a need for quality information on coals that will be mined during the next 20-30 years. At the time this project was initiated, the publicly available USGS coal quality data was based on samples primarily collected and analyzed between 1973 and 1985. The primary objective of NaCQI was to create a database containing comprehensive, accurate and accessible chemical information on the quality of mined and prepared United States coals and their combustion byproducts. This objective was to be accomplished through maintaining the existing publicly available coal quality database, expanding the database through the acquisition of new samples from priority areas, and analysis of the samples using updated coal analytical chemistry procedures. Priorities for sampling include those areas where future sources of compliance coal are federally owned. This project was a cooperative effort between the U.S. Geological Survey (USGS), State geological surveys, universities, coal burning utilities, and the coal mining industry. Funding support came from the Electric Power Research Institute (EPRI) and the U.S. Department of Energy (DOE).

Open-File Report↗
USGS2005

Characterization and modes of occurrence of elements in feed coal and coal combustion products from a power plant utilizing low-sulfur coal from the Powder River Basin, Wyoming

The U.S. Geological Survey and the University of Kentucky Center for Applied Energy Research are collaborating with an Indiana utility company to determine the physical and chemical properties of feed coal and coal combustion products from a coal-fired power plant. The Indiana power plant utilizes a low-sulfur (0.23 to 0.47 weight percent S) and lowash (4.9 to 6.3 weight percent ash) subbituminous coal from the Wyodak-Anderson coal zone in the Tongue River Member of the Paleocene Fort Union Formation, Powder River Basin, Wyoming. Based on scanning electron microscope and X-ray diffraction analyses of feed coal samples, two mineral suites were identified: (1) a primary or detrital suite consisting of quartz (including beta-form grains), biotite, feldspar, and minor zircon; and (2) a secondary authigenic mineral suite containing alumino-phosphates (crandallite and gorceixite), kaolinite, carbonates (calcite and dolomite), quartz, anatase, barite, and pyrite. The primary mineral suite is interpreted, in part, to be of volcanic origin, whereas the authigenic mineral suite is interpreted, in part, to be the result of the alteration of the volcanic minerals. The mineral suites have contributed to the higher amounts of barium, calcium, magnesium, phosphorus, sodium, strontium, and titanium in the Powder River Basin feed coals in comparison to eastern coals. X-ray diffraction analysis indicates that (1) fly ash is mostly aluminate glass, perovskite, lime, gehlenite, quartz, and phosphates with minor amounts of periclase, anhydrite, hematite, and spinel group minerals; and (2) bottom ash is predominantly quartz, plagioclase (albite and anorthite), pyroxene (augite and fassaite), rhodonite, and akermanite, and spinel group minerals. Microprobe and scanning electron microscope analyses of fly ash samples revealed quartz, zircon, and monazite, euhedral laths of corundum with merrillite, hematite, dendritic spinels/ferrites, wollastonite, and periclase. The abundant calcium and magnesium mineral phases in the fly ash are attributed to the presence of carbonate, clay, and phosphate minerals in the feed coal and their alteration to new phases during combustion. The amorphous diffraction-scattering maxima or glass 'hump' appears to reflect differences in chemical composition of fly ash and bottom ash glasses. In Wyodak-Anderson fly and bottom ashes, the center point of scattering maxima is due to calcium and magnesium content, whereas the glass 'hump' of eastern fly ash reflects variation in aluminum content. The calcium- and magnesium-rich and alumino-phosphate mineral phases in the coal combustion products can be attributed to volcanic minerals deposited in peat-forming mires. Dissolution and alteration of these detrital volcanic minerals occurred either in the peat-forming stage or during coalification and diagenesis, resulting in the authigenic mineral suite. The presence of free lime (CaO) in fly ash produced from Wyodak-Anderson coal acts as a self-contained 'scrubber' for SO3, where CaO + SO3 form anhydrite either during combustion or in the upper parts of the boiler. Considering the high lime content in the fly ash and the resulting hydration reactions after its contact with water, there is little evidence that major amounts of leachable metals are mobilized in the disposal or utilization of this fly ash.

Scientific Investigations Report↗
USGS2001

Chemical analysis and modes of occurrence of selected trace elements in a Powder River basin coal and its corresponding simulated cleaned coal

This report provides semi-quantitative data on modes of occurrence of 19 elements in as-mined Powder River Basin coal and its corresponding simulated cleaned coal. The data are in support of the project "Prediction of Trace Element Removal from Coal" --a Cooperative Research and Development Agreement (CRADA) with CQ Inc. The purpose of this CRADA is to apply modes of occurrence information to coal cleaning procedures. Techniques used in this study include sequential selective leaching procedures, scanning electron microscopy, X-ray diffraction analysis, and electron microprobe analysis. Selective leaching results indicate that greater than 40 percent of the elements Co, U, Be, Ca, Fe, Mn, Ba, Zn, Cd, Pb are associated with HCIsoluble carbonates, iron oxides, or monosulfides, greater than 40 percent of the Al, Cr and Mo are associated with HF-soluble silicates, greater than 40 percent of the Ni, Cu, As and Sb are associated with acid-insoluble phases and/or organic matter, and greater than 50 percent of the Hg is associated with HMDs-soluble pyrite. Thirty percent of the Th was leached by HCI and 30 percent of this element was leached by HF. Scanning electron microscopy indicates that quartz, kaolinite, illite and iron oxide, possibly hematite, are the major minerals present. X-ray diffraction analysis confirmed that quartz, kaolinite and hematite are present, but did not determine illite, indicating that illite in these coals is of low abundance or is poorly crystalline. Electron microprobe data indicate that concentrations of the chalcophile elements As, Se, Cu, Ni, Zn, and Cd in most pyrite grains are at or below the detection limit of about 100-200 ppm in both the as-mined coal and its corresponding simulated cleaned coal product. The results of this project should aid in the development of models for predicting the response of potentially toxic trace elements in commercial coal cleaning procedures.

Open-File Report↗