Jo Leslie Eimers | USGS Science

USGS2001

Estimated depth to water, North Carolina

This web site contains the Federal Geographic Data Committee-compliant metadata (documentation) for digital data produced for the North Carolina, Department of Environment and Natural Resources, Public Water Supply Section, Source Water Assessment Program. The metadata are for 11 individual Geographic Information System data sets. An overlay and indexing method was used with the data to derive a rating for unsaturated zone and watershed characteristics for use by the State of North Carolina in assessing more than 11,000 public water-supply wells and approximately 245 public surface-water intakes for susceptibility to contamination. For ground-water supplies, the digital data sets used in the assessment included unsaturated zone rating, vertical series hydraulic conductance, land-surface slope, and land cover. For assessment of public surface-water intakes, the data sets included watershed characteristics rating, average annual precipitation, land-surface slope, land cover, and ground-water contribution. Documentation for the land-use data set applies to both the unsaturated zone and watershed characteristics ratings. Documentation for the estimated depth-to-water map used in the calculation of the vertical series hydraulic conductance also is included.

North Carolina↗

USGS2001

Ground-water contribution classes to characterize watersheds in North Carolina

This web site contains the Federal Geographic Data Committee-compliant metadata (documentation) for digital data produced for the North Carolina, Department of Environment and Natural Resources, Public Water Supply Section, Source Water Assessment Program. The metadata are for 11 individual Geographic Information System data sets. An overlay and indexing method was used with the data to derive a rating for unsaturated zone and watershed characteristics for use by the State of North Carolina in assessing more than 11,000 public water-supply wells and approximately 245 public surface-water intakes for susceptibility to contamination. For ground-water supplies, the digital data sets used in the assessment included unsaturated zone rating, vertical series hydraulic conductance, land-surface slope, and land cover. For assessment of public surface-water intakes, the data sets included watershed characteristics rating, average annual precipitation, land-surface slope, land cover, and ground-water contribution. Documentation for the land-use data set applies to both the unsaturated zone and watershed characteristics ratings. Documentation for the estimated depth-to-water map used in the calculation of the vertical series hydraulic conductance also is included.

North Carolina↗

USGS2001

Unsaturated zone characteristics rating for North Carolina

This web site contains the Federal Geographic Data Committee-compliant metadata (documentation) for digital data produced for the North Carolina, Department of Environment and Natural Resources, Public Water Supply Section, Source Water Assessment Program. The metadata are for 11 individual Geographic Information System data sets. An overlay and indexing method was used with the data to derive a rating for unsaturated zone and watershed characteristics for use by the State of North Carolina in assessing more than 11,000 public water-supply wells and approximately 245 public surface-water intakes for susceptibility to contamination. For ground-water supplies, the digital data sets used in the assessment included unsaturated zone rating, vertical series hydraulic conductance, land-surface slope, and land cover. For assessment of public surface-water intakes, the data sets included watershed characteristics rating, average annual precipitation, land-surface slope, land cover, and ground-water contribution. Documentation for the land-use data set applies to both the unsaturated zone and watershed characteristics ratings. Documentation for the estimated depth-to-water map used in the calculation of the vertical series hydraulic conductance also is included.

North Carolina↗

USGS2001

Watershed characteristics rating for North Carolina

This web site contains the Federal Geographic Data Committee-compliant metadata (documentation) for digital data produced for the North Carolina, Department of Environment and Natural Resources, Public Water Supply Section, Source Water Assessment Program. The metadata are for 11 individual Geographic Information System data sets. An overlay and indexing method was used with the data to derive a rating for unsaturated zone and watershed characteristics for use by the State of North Carolina in assessing more than 11,000 public water-supply wells and approximately 245 public surface-water intakes for susceptibility to contamination. For ground-water supplies, the digital data sets used in the assessment included unsaturated zone rating, vertical series hydraulic conductance, land-surface slope, and land cover. For assessment of public surface-water intakes, the data sets included watershed characteristics rating, average annual precipitation, land-surface slope, land cover, and ground-water contribution. Documentation for the land-use data set applies to both the unsaturated zone and watershed characteristics ratings. Documentation for the estimated depth-to-water map used in the calculation of the vertical series hydraulic conductance also is included.

North Carolina↗

USGS2001

Land-cover classes to characterize the unsaturated zone in North Carolina

This web site contains the Federal Geographic Data Committee-compliant metadata (documentation) for digital data produced for the North Carolina, Department of Environment and Natural Resources, Public Water Supply Section, Source Water Assessment Program. The metadata are for 11 individual Geographic Information System data sets. An overlay and indexing method was used with the data to derive a rating for unsaturated zone and watershed characteristics for use by the State of North Carolina in assessing more than 11,000 public water-supply wells and approximately 245 public surface-water intakes for susceptibility to contamination. For ground-water supplies, the digital data sets used in the assessment included unsaturated zone rating, vertical series hydraulic conductance, land-surface slope, and land cover. For assessment of public surface-water intakes, the data sets included watershed characteristics rating, average annual precipitation, land-surface slope, land cover, and ground-water contribution. Documentation for the land-use data set applies to both the unsaturated zone and watershed characteristics ratings. Documentation for the estimated depth-to-water map used in the calculation of the vertical series hydraulic conductance also is included.

North Carolina↗

USGS2001

Land-Cover Classes to Characterize watersheds in North Carolina

This web site contains the Federal Geographic Data Committee-compliant metadata (documentation) for digital data produced for the North Carolina, Department of Environment and Natural Resources, Public Water Supply Section, Source Water Assessment Program. The metadata are for 11 individual Geographic Information System data sets. An overlay and indexing method was used with the data to derive a rating for unsaturated zone and watershed characteristics for use by the State of North Carolina in assessing more than 11,000 public water-supply wells and approximately 245 public surface-water intakes for susceptibility to contamination. For ground-water supplies, the digital data sets used in the assessment included unsaturated zone rating, vertical series hydraulic conductance, land-surface slope, and land cover. For assessment of public surface-water intakes, the data sets included watershed characteristics rating, average annual precipitation, land-surface slope, land cover, and ground-water contribution. Documentation for the land-use data set applies to both the unsaturated zone and watershed characteristics ratings. Documentation for the estimated depth-to-water map used in the calculation of the vertical series hydraulic conductance also is included.

North Carolina↗

USGS2001

Land-use classes to characterize watersheds and unsaturated zones in North Carolina

This web site contains the Federal Geographic Data Committee-compliant metadata (documentation) for digital data produced for the North Carolina, Department of Environment and Natural Resources, Public Water Supply Section, Source Water Assessment Program. The metadata are for 11 individual Geographic Information System data sets. An overlay and indexing method was used with the data to derive a rating for unsaturated zone and watershed characteristics for use by the State of North Carolina in assessing more than 11,000 public water-supply wells and approximately 245 public surface-water intakes for susceptibility to contamination. For ground-water supplies, the digital data sets used in the assessment included unsaturated zone rating, vertical series hydraulic conductance, land-surface slope, and land cover. For assessment of public surface-water intakes, the data sets included watershed characteristics rating, average annual precipitation, land-surface slope, land cover, and ground-water contribution. Documentation for the land-use data set applies to both the unsaturated zone and watershed characteristics ratings. Documentation for the estimated depth-to-water map used in the calculation of the vertical series hydraulic conductance also is included.

North Carolina↗

USGS2001

Percent-slope classes to characterize the unsaturated zone in North Carolina

This web site contains the Federal Geographic Data Committee-compliant metadata (documentation) for digital data produced for the North Carolina, Department of Environment and Natural Resources, Public Water Supply Section, Source Water Assessment Program. The metadata are for 11 individual Geographic Information System data sets. An overlay and indexing method was used with the data to derive a rating for unsaturated zone and watershed characteristics for use by the State of North Carolina in assessing more than 11,000 public water-supply wells and approximately 245 public surface-water intakes for susceptibility to contamination. For ground-water supplies, the digital data sets used in the assessment included unsaturated zone rating, vertical series hydraulic conductance, land-surface slope, and land cover. For assessment of public surface-water intakes, the data sets included watershed characteristics rating, average annual precipitation, land-surface slope, land cover, and ground-water contribution. Documentation for the land-use data set applies to both the unsaturated zone and watershed characteristics ratings. Documentation for the estimated depth-to-water map used in the calculation of the vertical series hydraulic conductance also is included.

North Carolina↗

USGS2001

Percent-slope classes to characterize watersheds in North Carolina

This web site contains the Federal Geographic Data Committee-compliant metadata (documentation) for digital data produced for the North Carolina, Department of Environment and Natural Resources, Public Water Supply Section, Source Water Assessment Program. The metadata are for 11 individual Geographic Information System data sets. An overlay and indexing method was used with the data to derive a rating for unsaturated zone and watershed characteristics for use by the State of North Carolina in assessing more than 11,000 public water-supply wells and approximately 245 public surface-water intakes for susceptibility to contamination. For ground-water supplies, the digital data sets used in the assessment included unsaturated zone rating, vertical series hydraulic conductance, land-surface slope, and land cover. For assessment of public surface-water intakes, the data sets included watershed characteristics rating, average annual precipitation, land-surface slope, land cover, and ground-water contribution. Documentation for the land-use data set applies to both the unsaturated zone and watershed characteristics ratings. Documentation for the estimated depth-to-water map used in the calculation of the vertical series hydraulic conductance also is included.

North Carolina↗

USGS2000

Methods of rating unsaturated zone and watershed characteristics of public water supplies in North Carolina

Overlay and index methods were derived for rating the unsaturated zone and watershed characteristics for use by the State of North Carolina in assessing more than 11,000 public water-supply wells and approximately 245 public surface-water intakes. The rating of the unsaturated zone and watershed characteristics represents a practical and effective means of assessing part of the inherent vulnerability of water supplies to potential contamination. Factors that influence the inherent vulnerability of the drinking water supply to potential contamination were selected and assigned ratings (on a scale of 1 to 10) to cover the possible range of values in North Carolina. These factors were assigned weights of 1, 2, or 3 to reflect their relative influence on the inherent vulnerability of the drinking water supply. The factor values were obtained from Geographic Information System data layers, and were transformed into grids having 60-meter by 60-meter cells, with each cell being assigned a value. Identification of factors, the development of ratings for each, and assignment of weights were based on (1) a literature search, which included examination of potential factors and their effects on the drinking water; and (2) consultation with experts in the science and engineering of hydrology, geology, forestry, agriculture, and water management. Factors selected for rating the inherent vulnerability of the unsaturated zone are vertical hydraulic conductance, land-surface slope, land cover, and land use. Vertical hydraulic conductance is a measure of the capacity of unsaturated material to transmit water. Land-surface slope influences whether precipitation runs off land surfaces or infiltrates into the subsurface. Land cover, the physical overlay of the land surface, influences the amount of precipitation that becomes overland flow or infiltrates into the subsurface. Land use describes activities that occur on the land surface and influence the potential generation of nonpoint-source contamination. Factors selected for rating the watershed characteristics upstream from surface-water intakes are average annual precipitation, land-surface slope, land cover, land use, and ground-water contribution. The average annual precipitation represents the mass of water that becomes available for transport in a watershed. Land-surface slope, land cover, and land use have similar influences in watersheds as those identified for the unsaturated zone. Ground-water contribution represents the part of streamflow that is derived from ground-water discharge.

North Carolina↗

USGS1998

Water quality in the Albemarle-Pamlico drainage basin, North Carolina and Virginia, 1992-95

The NAWQA Program is assessing the water-quality conditions of more than 50 of the Nation's largest river basins and aquifers, known as Study Units. Collectively, these Study Units cover about one-half of the United States and include sources of drinking water used by about 70 percent of the U.S. population. Comprehensive assessments of about one-third of the Study Units are ongoing at a given time. Each Study Unit is scheduled to be revisited every decade to evaluate changes in water-quality conditions. NAWQA assessments rely heavily on existing information collected by the USGS and many other agencies as well as the use of nationally consistent study designs and methods of sampling and analysis. Such consistency simultaneously provides information about the status and trends in water-quality conditions in a particular stream or aquifer and, more importantly, provides the basis to make comparisons among watersheds and improve our understanding of the factors that affect water-quality conditions regionally and nationally. This report is intended to summarize major findings that emerged between 1992 and 1995 from the water-quality assessment of the Albemarle-Pamlico Drainage Study Unit and to relate these findings to water-quality issues of regional and national concern. The information is primarily intended for those who are involved in water-resource management. Indeed, this report addresses many of the concerns raised by regulators, water-utility managers, industry representatives, and other scientists, engineers, public officials, and members of stakeholder groups who provided advice and input to the USGS during this NAWQA Study-Unit investigation. Yet, the information contained here may also interest those who simply wish to know more about the quality of water in the rivers and aquifers in the area where they live.

North Carolina, Virginia↗

USGS1997

Nitrate-nitrogen concentrations in shallow ground water of the Coastal Plain of the Albemarle-Pamlico Drainage Study Unit, North Carolina and Virginia

The Albemarle-Pamlico Drainage Study Unit is one of 20 National Water-Quality Assessment (NAWQA) studies begun in 1991 by the U.S. Geological Survey (USGS) to assess the Nation's water quality. This report presents findings on nitrate and related constituents from studies conducted between 1991 and 1995 by the USGS's Albemarle-Pamlico NAWQA and the North Carolina Division of Water Quality (NCDWQ). The purpose of this Fact Sheet is to show the distribution of nitrate-nitrogen concentrations in shallow ground water of the Coastal Plain and present some factors which may affect its occurrence.

North Carolina, Virginia↗

USGS1997

Hydrogeology and simulation of ground-water flow in the thick regolith-fractured crystalline rock aquifer system of Indian Creek basin, North Carolina

The Indian Creek Basin in the southwestern Piedmont of North Carolina is one of five type areas studied as part of the Appalachian Valleys-Piedmont Regional Aquifer-System analysis. Detailed studies of selected type areas were used to quantify ground-water flow characteristics in various conceptual hydrogeologic terranes. The conceptual hydrogeologic terranes are considered representative of ground-water conditions beneath large areas of the three physiographic provinces--Valley and Ridge, Blue Ridge, and Piedmont--that compose the Appalachian Valleys-Piedmont Regional Aquifer-System Analysis area. The Appalachian Valleys-Piedmont Regional Aquifer-System Analysis study area extends over approximately 142,000 square miles in 11 states and the District of Columbia in the Appalachian highlands of the Eastern United States. The Indian Creek type area is typical of ground-water conditions in a single hydrogeologic terrane that underlies perhaps as much as 40 percent of the Piedmont physiographic province. The hydrogeologic terrane of the Indian Creek model area is one of massive and foliated crystalline rocks mantled by thick regolith. The area lies almost entirely within the Inner Piedmont geologic belt. Five hydrogeologic units occupy major portions of the model area, but statistical tests on well yields, specific capacities, and other hydrologic characteristics show that the five hydrogeologic units can be treated as one unit for purposes of modeling ground-water flow. The 146-square-mile Indian Creek model area includes the Indian Creek Basin, which has a surface drainage area of about 69 square miles. The Indian Creek Basin lies in parts of Catawba, Lincoln, and Gaston Counties, North Carolina. The larger model area is based on boundary conditions established for digital simulation of ground-water flow within the smaller Indian Creek Basin. The ground-water flow model of the Indian Creek Basin is based on the U.S. Geological Survey?s modular finite-difference ground-water flow model. The model area is divided into a uniformly spaced grid having 196 rows and 140 columns. The grid spacing is 500 feet. The model grid is oriented to coincide with fabric elements such that rows are oriented parallel to fractures (N. 72° E.) and columns are oriented parallel to foliation (N. 18° W.). The model is discretized vertically into 11 layers; the top layer represents the soil and saprolite of the regolith, and the lower 10 layers represent bedrock. The base of the model is 850 feet below land surface. The top bedrock layer, which is only 25 feet thick, represents the transition zone between saprolite and unweathered bedrock. The assignment of different values of transmissivity to the bedrock according to the topographic setting of model cells and depth results in inherent lateral and vertical anisotropy in the model with zones of high transmissivity in bedrock coinciding with valleys and draws, and zones of low transmissivity in bedrock coinciding with hills and ridges. Lateral anisotropy tends to be most pronounced in the north-northwest to south-southeast direction. Transmissivities decrease nonlineraly with depth. At 850 feet, depending on topographic setting, transmissivities have decreased to about 1 to 4 percent of the value of transmissivity immediately below the regolith-bedrock interface. The model boundaries are, for the most part, specified-flux boundaries that coincide with streams that surround the Indian Creek Basin. The area of active model nodes within the boundaries is about 146 square miles and has about 17,400 active cells. The numerical model is designed not as a predictive tool, but as an interpretive one. The model is designed to help gain insight into flow-system dynamics. Predictive capabilities of the numerical model are limited by the constraints placed on the flow system by specified fluxes and recharge distribution.

North Carolina↗