EXPLORE THE ARCHIVE

Jay M. Thompson

Publications and source records attributed to Jay M. Thompson.

14 recordsLinked to original sources

USGS2026

Geochemical, mineralogical, and isotopic evidence for multi-stage genesis of the Hicks Dome REE + Y-HFSE-fluorite deposit, Illinois, USA

Hicks Dome hosts breccias enriched in rare earth elements (REE), Y, Th, F, Ba, Ti, Nb, and Be, alongside spatially associated lamprophyre dikes (ca. 271 Ma). Hicks Dome is located within the Illinois–Kentucky Fluorspar District, which hosts fluorite, Pb–Zn, and barite resources. This study investigates the genetic relationships between Hicks Dome mineralization in breccias, alkaline magmatism, and Illinois–Kentucky Fluorspar District mineralization. Lamprophyre dikes are light REE–enriched with chondrite-normalized abundances decreasing from La to Lu. The Host Breccia exhibits middle and heavy REE–enriched patterns that mirror those of the principal REE–Th host minerals, including fluorapatite, xenotime, and thorite. Textural evidence suggests recrystallization of phosphates, sulfates, and Ti–Nb oxides in the Host Breccia. U–Pb geochronology constrains multiple mineralizing events, with ages of 277 ± 18 Ma from low-Th apatite interpreted as main-stage mineralization, and 121.6 ± 9.7 Ma from high-Th apatite indicating later overprinting. O–H–C stable isotope data provide evidence for multiple stages of fluid-rock interaction and fluid mixing: (1) early magmatic fluids dissolved limestone country rock, (2) mixing between magmatic fluids and basinal brines led to main-stage mineralization in the Host Breccia, and (3) late-stage mineralization occurred following mixing of meteoric water and basinal brine. These results indicate that heavy REEs, high field strength elements, and fluorine precipitated proximal to its alkaline magmatic source because of fluid–rock interactions and fluid mixing. Subsequent fluid mixing drove late-stage recrystallization and additional fluorite formation, a process that may be similar to mineralization in the Illinois-Kentucky Fluorspar District.

Illinois↗

USGS2026

Unraveling protracted modification of Archean and Paleoproterozoic crust in central Laurentia, Penokean orogen, with garnet and accessory mineral geochronology and microstructural analysis

Proterozoic metamorphism and deformation of the southern margin of the Superior craton in the Lake Superior region is attributed to the Penokean orogeny (1890−1830 Ma). This model includes a period of crustal inversion in which Archean basement blocks were exhumed through overlying Paleoproterozoic strata, producing the corridor of gneiss domes that parallels the trend of the Penokean orogen across the northern Midcontinent, USA. However, recent geologic mapping and 40 Ar/ 39 Ar geochronology challenge this interpretation, suggesting instead that the gneiss dome structures reflect younger episodes of tectonic activity along the southern margin of Laurentia. In absence of integrated pressure-temperature-time-deformation constraints for these rocks, interpretations are largely limited to their final cooling history, making it difficult to both identify the tectonic forces that shaped the architecture of the Penokean orogenic belt and assess the extent to which later Proterozoic tectonism modified the southern Superior craton. We address this problem with an approach joining thermodynamic modeling, garnet and accessory mineral geochronology, and microstructural analysis for several metamorphic rocks across the gneiss dome corridor. The U-Pb ages of titanite reveal that the Proterozoic geometries of exhumed basement gneiss domes are governed by preexisting Archean structures. Garnet Lu-Hf geochronology constrains the timing of prograde-to-peak metamorphism in the Penokean orogenic belt. Granulite facies metamorphism is related to the final stages of the Penokean orogeny at 1837 Ma and localized in a belt of high-grade rocks near a major Penokean suture. Garnet Lu-Hf ages of samples adjacent to gneiss domes reflect regional metamorphism following the accretionary phase of the Penokean orogeny, between 1825 Ma and 1782 Ma, which we suggest reflects continued crustal thickening related to convergence farther south during this time interval. Combination of garnet microstructures and Sm-Nd ages reflects later exhumation of gneiss domes and buried metasedimentary rocks by ca. 1750 Ma, consistent with previously published 40 Ar/ 39 Ar cooling ages across the region. Reset Lu-Hf and Sm-Nd garnet ages and U-Pb ages of syn-kinematic titanite reflect reactivation of primary Penokean structures during this period of basement uplift. These data document significant modification of the Penokean orogen and the Archean crust of the southern Superior province between 1800 Ma and 1700 Ma. Tectonic activity during this interval coincides with collisional events recognized in western Laurentia, suggesting that the period immediately following the Penokean orogeny may be a broadly important time for crustal growth and modification in proto-North America.

Michigan, Wisconsin↗

USGS2026

Insights into Mountain Pass carbonatite formation from in-situ sulfur isotopes and geochemistry of sulfate and sulfide minerals

The Mountain Pass carbonatite stock hosts a world-class rare earth element deposit and may be classified as a carbonate-sulfate igneous rock, as it contains on average > 50 volume percent carbonate minerals and 20 to 30 volume percent sulfate minerals. The sulfates range in composition from barite to celestine and locally occur with sparse sulfide minerals. We investigate the origin of sulfur enrichment and the occurrence of sulfur-bearing minerals in the Mountain Pass carbonatite with in-situ sulfur isotope and mineral chemistry. Barite cores with δ 34 S of 1 to 3‰ do not coexist with sulfides, whereas celestine rims with δ 34 S of > 3‰ are associated with sulfides with δ 34 S < -10‰. We propose a model in which sulfur-bearing sediments were subducted during episodes of plate convergence in the Mojave Province that preceded Mountain Pass magmatism. Metasomatism of the overlying mantle by melts derived from the subducted sediments generated an unusually carbon- and sulfur-rich source to yield carbonatite magmas. Sulfur from primary carbonatite magmas and ~ 1 to 7% sulfur from subducted sediment melts yielded a slightly enriched δ 34 S composition (relative to depleted mantle δ 34 S of -1‰) for early crystallizing barite. Celestine rims on magmatic barite cores formed at low, hydrothermal temperatures (< 350 °C) based on S isotope thermometry for equilibrium celestine-galena and celestine-pyrite pairs. The sparse sulfides in the carbonatite stock are not in equilibrium with the primary barite cores and therefore do not permit S isotope thermometry estimates of magmatic temperatures. The S/Se ratios of sulfide minerals (> 3,400) typically exceed primitive mantle values (S/Se of 3,340), also consistent with their derivation from hydrothermal fluids. Trace occurrences of sulfide and sulfate minerals in alkaline silicate stocks related to the carbonatite stock have similar δ 34 S compositions and yield similarly low formation temperatures, suggesting regionally extensive and chemically similar sulfur-bearing hydrothermal fluids that imparted lithologically diverse rocks with a consistent sulfur isotope fingerprint.

California, Nevada↗

USGS2026

Critical minerals in zinc ore—An update on Earth Mapping Resources Initiative Research in the Boulder Batholith region, Montana

Plain Language Summary U.S. Geological Survey research, in collaboration with Montana Technical University and Montana Bureau of Geology and Mines, is providing key critical mineral information that may have potential for critical mineral production of several mining districts in the Boulder Batholith region, to better understand the abundance and distribution of natural resources within this region. Continued research can be used to show the potential for previously undiscovered critical mineral resources in southwestern Montana and in other parts of the United States.

Montana↗

USGS2026

Utilization of multiple geochronology techniques to constrain the age of laterization and mineralization of the world-class Mount Weld rare earth element deposit, Western Australia

Pervasive chemical weathering on stable cratons may form thick regoliths and elemental enrichment, but constraining the age of regolith formation is challenging. In this study we utilize multiple geochronological techniques on different minerals from the world-class Mount Weld rare earth element (REE) deposit, formed by lateritic weathering of a carbonatite, to constrain the age of formation and provide insight into landscape evolution. The oldest dates, ca. 100 to 38 Ma, are from Lu-Hf dating of churchite [HREE(PO 4 )·2(H 2 O)], a heavy REE phosphate mineral. Growth bands on individual minerals show a younging outwards. 40 Ar/ 39 Ar geochronology of cryptomelane [K(Mn 4+ ,Mn 2+ )₈O₁₆] yielded dates from ca. 40 to 27 Ma. Similarly, (U-Th)/He geochronology of goethite [FeO(OH)] yielded dates ranging from ca. 45 to 19 Ma. Integrating results into regional constraints, suggests 1) churchite formed by mineral saturation in a karst-like setting below the water table from ca. 100 to 40 Ma, 2) with minor uplift and erosion, cryptomelane and goethite formed at or near the water table between ca. 45 and 19 Ma, 3) after ca. 15 to 10 Ma chemical weathering within the profile had ended. Other studies document that the region experienced minimal uplift and a wet, warm climate from ca. 100 Ma to 15 Ma. These conditions and the high carbonate content of the carbonatite promote extensive chemical weathering, a deep weathering profile, and the preservation of the weathered section. This study highlights the use of multiple geochronological techniques utilizing different minerals to provide insight into how laterites form and to constrain the timing and history of the formation of this important mineral deposit.

Western Australia↗

USGS2026

In-situ geochronology using LA-ICP-MS/MS: Application of the Lu-Hf system in carbonate, apatite and fluorite

Geochronology is a fundamental tool for reconstructing earth history and constraining the timing of ore deposit formation. Traditionally, U-rich minerals like zircon, titanite, monazite and apatite have been analysed to determine the timing of mineralization and alteration events. However, not all deposits or alteration assemblages contain these minerals, and the U-Pb system can be disturbed due to open system behaviour. We present a methodology for obtaining in-situ Lu-Hf dates from various minerals to demonstrate the potential for dating ore deposits that lack U-rich minerals. Carbonate, apatite and fluorite minerals from different tectonic settings and geological environments were analysed. We acquired Lu-Hf and REE (rare earth element) data from carbonate minerals from a carbonatite orebody and dike samples from the Mountain Pass REE carbonatite deposit in California, USA. We also tested a ‘double-dating’ method, where U-Th-Pb dates and Lu-Hf dates were obtained from the same analysis of apatite from rocks in the Michigan’s Great Lakes Tectonic Zone. Preliminary results for Lu-Hf dating of fluorite from carbonatite rocks in the Lemitar Mountains of New Mexico are also included. The analytical methodology shows promising results in each of these cases where there is sufficient parent Lu and U and measurable daughter Hf and Pb respectively.

Conference Paper↗

USGS2025

Geochemistry and thermometry of magnetite veins and replacements in iron ore deposits from the Iron Springs district, SW Utah, USA: Relation to magmatic and hydrothermal processes

Ore-genesis, texture, chemical compositions, and thermometry of magnetite were used to better evaluate the origins of iron ore deposits across the Iron Spring district, Utah. Trace element compositions, determined by LA-ICP-MS, were used to calculate temperatures based on X Mg numbers and characterize the trace element signatures of magmatic and hydrothermal magnetite. Magnetite occurs as coarser crystalline grains within veins, breccias, and cavities along with finer crystalline replacements. Magnetite is most commonly intergrown with apatite, phlogopite, and carbonate in veins, breccias, and cavities where apatite occurs separately from the other gangue minerals. The results using empirical trace element discrimination diagrams generally suggest that the magnetite is overall of hydrothermal origin regardless of textural variations or field relationships. The X Mg numbers of the magnetite in the magnetite-apatite ores, however, are suggestive of high temperature magmatic conditions; whereas those of vein, breccia, and replacement occurrences containing other gangue minerals are suggestive of lower temperature hydrothermal processes.

Utah↗

USGS2025

Re-Os geochronology of molybdenite by LA-ICP-MS/MS

Re-Os geochronology is a powerful tool to directly date sulphide mineralisation using phases such as molybdenite, pyrite and chalcopyrite. We present a snapshot of a method in development utilizing laser ablation inductively coupled-plasma ‘triple quad’ mass spectrometry (LA-ICP-MS/MS) for Re-Os geochronology of molybdenite. While traditional LA-(MC)-ICP-MS measurements are limited by the >90% isobaric interference correction of parent radioactive 187 Re on radiogenic daughter 187 Os, the MS/MS technology minimizes this correction through careful instrument tuning and use of a (CH 4 + H 2 + He) reaction gas mixture to mass shift 187 Os away from 187 Re. We demonstrate the potential of the MS/MS technique by presenting robust Re-Os dates for three different molybdenite samples ranging in age from ~28 to 1520 Ma.

Conference Paper↗

USGS2025

Ages and trace element fertility of porphyry-related mineralization in the Philipsburg polymetallic district, Montana, with a comparison to Butte

The Philipsburg mining district is a Mo-Cu porphyry system with associated Cordilleran polymetallic veins. Geochronology was employed to date the porphyry (~66 Ma, U/Pb in zircon) and molybdenite mineralization from the veins (~76 Ma, Re-Os). Age results suggest that the two-mineralization events model proposed by Lund et al. (2018) for the Butte district can be applied to the Philipsburg deposit. Furthermore, common fertility indicators from zircon trace elements were analyzed with variable success to characterize the existing Mo-Cu mineralization of the Philipsburg porphyry. This raises concerns about the benefits of this method and/or the importance of sampling, which could impact exploration for similar porphyry deposits.

Montana↗

USGS2025

Fingerprinting magmatic REE deposit sources with zircon petrochronology

Carbonatites and associated alkaline silicate rocks are of considerable economic interest due to their enrichments in rare earth elements. The petrogenesis and source(s) of these complexes, however, are poorly understood. Models propose either mantle plume-derived carbon-rich melts or a mantle source enriched by subduction-related metasomatism. We use zircon trace elements to fingerprint carbonatite-alkaline complex sources, focusing on the economically significant 1.4 Ga Mountain Pass intrusive suite (MPIS). Autocrystic zircon from MPIS alkaline silicate rocks are enriched in Th and U relative to Nb suggesting a subduction influenced, oxidized source region. Lower Sc/Yb, higher Ti concentrations, and the absence of Eu anomalies in autocrystic zircon suggest derivation from a less hydrous, hotter, and deeper mantle source relative to arc-related 1.8–1.6 Ga inherited zircon. These data are best explained by syn- to post-collisional Mesoproterozoic reactivation of a subduction-metasomatized mantle source. The source and tectonic setting of the MPIS contrasts with Mesoproterozoic Gifford Creek and Bayan Obo carbonatites which exhibit plume-like compositions and are associated with rifts, suggesting different sources and tectonic settings for these economically significant deposits. We demonstrate that zircon petrochronology is a robust method for distinguishing carbonatite sources and can inform more targeted exploration strategies for critical mineral resources.

Conference Paper↗

USGS2025

Formation of the Mount Weld rare earth deposit, Western Australia: Geochronology constraints

Constraining the age of protracted chemical weathering in stable cratonic areas that may form thick regoliths and the potential enrichment of various elements is challenging. Economic deposits of aluminium, iron, copper, nickel, cobalt, niobium, and rare earth elements (REEs) form in this manner. Determining the age of formation can provide key information for exploration of similar deposits as well as to better constrain paleoclimatic conditions. This study describes our effort to constrain the age of formation of the Mount Weld deposit, a world-class carbonatite-derived REE laterite deposit. We utilize multiple geochronological techniques on different minerals. The oldest dates, ranging from ca. 100 to 50 Ma, were from laser ablation ICPMS, Lu-Hf dating of churchite, a heavy REE phosphate mineral formed by mineral saturation in groundwater. Growth bands on individual minerals show a younging outwards. 40 Ar/ 39 Ar geochronology of cryptomelane, a potassium-bearing manganese oxide mineral, yielded ages ranging from ca. 40 to 26 Ma. Similarly, (U–Th)/He geochronology of goethite yielded ages from ca. 45 to 19 Ma.

Mount Weld deposit↗

USGS2025

Paleoproterozoic vein graphite mineralization caused by decarbonation in the Ruby Range, Montana, USA

Hydrothermal graphite veins are a possible source for modern battery materials and require better understanding of their carbon source(s) and absolute timing to develop mapable criteria for exploration models. We present new observations of graphite vein and alteration paragenesis and U-Pb LA-ICP-MS titanite age data from the Ruby prospect, Montana, USA, that constrain mineralization timing and source. The graphite veins cut high-temperature metamorphic rocks of the lower Christensen Range suite and are associated with intense diopside (Di0.69Hd0.27Jo0.04) alteration of marble. The oldest titanite ages in fresh marble and partially altered calc-silicate gneiss are ca. 2,500 – 2,450 Ma, show elevated REE values, and Eu/Eu* <1.5, consistent with growth during early regional metamorphism. Titanite in diopside-graphite alteration, interpreted as part of the hydrothermal vein-forming episode, cluster around 1,750 Ma, are characterized by lower REE values, and show Eu/Eu* >2; suggesting a low fO 2 fluid generated from metamorphism during the Big Sky orogeny. Our paragenetic observations and titanite ages indicate graphite vein formation via skarnoid decarbonation reactions in marble late in regional orogenesis. Granulite-facies, carbonate-bearing, supracrustal rock terranes are thus favorable for hydrothermal graphite vein deposits.

Montana↗

USGS2025

Stable isotope composition and geochemistry of calcite and dolomite in the Mountain Pass carbonatite: A lens into petrogenesis

Carbonatites host most of the global rare earth element (REE) deposits. The petrogenesis of these rocks, including magmatic and post-magmatic processes, are poorly understood but critical in forming and upgrading these deposits. The Mountain Pass carbonatite, which hosts the only active REE mine in North America, is lithologically variable but consistently contains >50% calcite and/or dolomite. Multiple generations of carbonates are evident, suggesting bulk analysis of carbonate minerals would generate a mixed isotopic and geochemical signature. In-situ stable carbon and oxygen isotopes, combined with geochemical analysis and petrography, distinguish carbonate generations, trace the source region of the carbonatite magma, and link carbonate genesis to REE mineralization throughout the intrusion. Primary carbon and oxygen isotope values outside the accepted mantle range may suggest a subduction-related carbon and oxygen source in the mantle. Deformation textures in primary calcite indicate syn- or post-crystallization ductile flow. Carbonates with secondary textures and heavy δ 13 C and δ 18 O values are associated with ore mineralization, suggesting fluid mobilization was important in concentrating REE and upgrading of the Mountain Pass deposit.

California↗

USGS2025

Niobium-rich minerals from the Sheep Creek carbonatite-related deposits, Montana, USA

The Sheep Creek area in southwest Montana contains a number of small, tabular, carbonatite-related deposits that are rich in Nb- and REE-minerals. Two of the “vein-dikes” were mined at a small scale for Nb in the late 1950s. The most abundant Nb-bearing minerals are columbite-(Fe), nioboaeschynite-(Ce), baotite, and two varieties of Ti-Nb-Fe-oxide. An early oxide with Ti/Nb (atomic) near unity later broke down to a mixture of columbite + TiO2 with distinctly lower Nb content. Zircon intergrown with the Nb-REE minerals was dated by U-Pb methods to 116±2 Ma. This age is in agreement with previous dating (Th-Pb on monazite, Re-Os on molybdenite), and indicates that the Sheep Creek deposits are early Cretaceous in age.

Montana↗