Geology topics

Jarrett T. Ellis

Publications and source records attributed to Jarrett T. Ellis.

5 recordsLinked to original sources

USGS2020

Missouri StreamStats—St. Louis County and the City of St. Louis urban application

To address a major limitation of the functionality of the Missouri statewide StreamStats application in the urban areas of St. Louis County and the City of St. Louis, Missouri, the U.S. Geological Survey, in cooperation with the Metropolitan St. Louis Sewer District, defined watershed boundaries and hydrography for the study area using high-resolution 3-meter digital elevation data derived from light detection and ranging sources, high-resolution 6-inch imagery, and storm sewer network geospatial data. The combined sanitary sewers, a part of the storm sewer network, were integrated into the open channel hydrography and elevation data using a new Arc Hydro stormwater tool developed to facilitate the incorporation of the combined sanitary sewer network into the StreamStats application. The combined sanitary sewer network was edited for connectivity and flow direction before integration into the Missouri-St. Louis StreamStats application. Inlet structures in the geospatial data were defined as HydroJunction features that allow for stormwater runoff to enter the combined sanitary sewer network. An Arc Hydro stormwater processing workflow and a sewershed delineation tool were developed to integrate the combined sanitary sewer network with the hydrographic dataset and digital elevation model in the study area. The StreamStats application developed for the study area provides various data exploration tools that can be used to examine the spatial data and to obtain general descriptive information and flow statistics at streamgages in the study area. Watersheds and sewersheds can be delineated and basin characteristics can be determined at any point on the open channel network or the combined sanitary sewer network in the study area. Peak-flow statistics can be computed at any point on the open channel network. A report summarizing the results is generated by the StreamStats application and can be downloaded and used in other software. The Missouri-St. Louis StreamStats application is limited to the area inside St. Louis County and the City of St. Louis and excludes locations on the main stem of the Mississippi, Missouri, and Meramec Rivers. The limitations of the Missouri-St. Louis StreamStats application include possible inaccuracies using regression equations for peak-flow statistics developed assuming natural flow conditions and topographically derived watersheds determined from a coarser resolution of data than is used in this application. Additionally, published regression equations for peak-flow statistics did not incorporate any pipe flow or sewershed delineations when they were developed, which limits the applicability of peak-flow statistics to basins based on primarily topographic delineation. Inaccuracies in resolution, completeness, location, or attribution of geospatial elevation data, hydrographic data, derived stream lines, derived watershed boundaries, and combined sanitary sewer data can limit the accuracy and functionality of the Missouri-St. Louis StreamStats application.

Missouri↗

USGS2019

Bathymetric map and surface area and capacity table for Beaver Lake near Rogers, Arkansas, 2018

Beaver Lake was constructed in 1966 on the White River in the northwest corner of Arkansas for flood control, hydroelectric power, public water supply, and recreation. The surface area of Beaver Lake is about 27,900 acres and approximately 449 miles of shoreline are at the conservation pool level (1,120 feet above the North American Vertical Datum of 1988). Sedimentation in reservoirs can result in reduced water storage capacity and a reduction in usable aquatic habitat. Therefore, accurate and up-to-date estimates of reservoir water capacity are important for managing pool levels, power generation, recreation, and downstream aquatic habitat. Many of the lakes operated by the U.S. Army Corps of Engineers are periodically surveyed to monitor bathymetric changes that affect water capacity. In October 2018, the U.S. Geological Survey, in cooperation with the U.S. Army Corps of Engineers, completed one such survey of Beaver Lake using a multibeam echosounder. The echosounder data were combined with light detection and ranging (lidar) data to prepare a bathymetric map and a surface area and capacity table.

Arkansas↗

USGS2019

Bathymetric contour map, surface area and capacity table, and bathymetric change map for Sugar Creek Lake near Moberly, Missouri, 2018

Managers of water-supply lakes need an accurate estimate of the lake capacity to ensure that enough water is available for uses such as: providing consistent recreation pool levels, preserving downstream aquatic habitat, flood abatement, water supply, and power generation. Lake capacity is particularly important for managers of water-supply lakes during periods of drought, unexpected population growth, or exceptionally high water use in the area supplied by the lake. Sedimentation, primarily from runoff into the lake, will cause a loss of storage capacity as a lake ages; as a result, the capacity table for the lake (if one exists) will overestimate the actual capacity. Lake bathymetric changes can be demonstrated through periodic surveying, and rates of sediment accumulation can be calculated so that managers can better regulate the water supply. The U. S. Geological Survey, in cooperation with the Missouri Department of Natural Resources, completed a bathymetric survey of Sugar Creek Lake in December 2003. Sugar Creek Lake, constructed in 1922, is about 4 miles northwest of Moberly, Missouri, in Randolph County and has a surface area of about 330 acres at the spillway elevation of 746.8 feet. The lake primarily is used for recreation and drinking-water supply for the town of Moberly, Missouri. In September 2018, the U. S. Geological Survey, in cooperation with the Missouri Department of Natural Resources and the City of Moberly, Missouri, surveyed the bathymetry of Sugar Creek Lake to prepare an updated bathymetric map and a surface area and capacity table. The 2003 survey was compared with the 2018 survey to document the changes in the bathymetric surface. The comparison found that in the 14.7 years between the two surveys the lake had lost 230 acre-feet of capacity and had an average sediment accumulation of 0.96 feet.

Missouri↗

USGS2018

Remote sensing of bush honeysuckle in the Middle Blue River Basin, Kansas City, Missouri, 2016–17

Amur honeysuckle bush ( Lonicera maackii ) and Morrow’s honeysuckle ( Lonicera morrowii ) are two of the most aggressively invasive species to become established throughout areas along the Blue River in metropolitan Kansas City, Missouri. These two large, spreading shrubs (locally referred to as bush honeysuckle in the Kansas City metropolitan area) colonize the understory, crowd out native plants, and may be allelopathic, producing a chemical that restricts growth of native species. Removal efforts have been underway for more than a decade by local conservation groups such as Bridging The Gap and Heartland Conservation Alliance, who are concerned with the loss of native species diversity associated with the spread of bush honeysuckle. Bush honeysuckle produces leaves early in the spring before almost all other vegetation and retains leaves late in the fall after almost all other species have lost their leaves. Appropriately timed imagery can be used during early spring and late fall to map the extent of bush honeysuckle. Using multispectral imagery collected in February 2016 and true color aerial imagery collected in March 2016, a coverage map of bush honeysuckle was made to investigate the extent of bush honeysuckle in a study area along the middle reach of the Blue River in the Kansas City metropolitan area in Jackson County, Missouri. The coverage map was further classified into unlikely, low-, and high-density bush honeysuckle density at a 30-foot cell size. The unlikely density class correctly predicted the absence and approximate density of bush honeysuckle for 86 percent of the field-verification points, the low-density class predicted the presence and approximate density with 73-percent confidence, and the high-density class was predicted with 67-percent confidence.

Missouri↗

USGS2018

Missouri StreamStats—A water-resources web application

The U.S. Geological Survey (USGS) maintains and operates more than 8,200 continuous streamgages nationwide. Types of data that may be collected, computed, and stored for streamgages include streamgage height (water-surface elevation), streamflow, and water quality. The streamflow data allow scientists and engineers to calculate streamflow statistics, such as the 1-percent annual exceedance probability flood (also known as the 100-year flood), the mean flow, and the 7-day, 10-year low flow, which are used by managers to make informed water resource management decisions, at each streamgage location. Researchers, regulators, and managers also commonly need physical characteristics (basin characteristics) that describe the unique properties of a basin. Common uses for streamflow statistics and basin characteristics include hydraulic design, water-supply management, water-use appropriations, and flood-plain mapping for establishing flood-insurance rates and land-use zones. The USGS periodically publishes reports that update the values of basin characteristics and streamflow statistics at selected gaged locations (locations with streamgages), but these studies usually only update a subset of streamgages, making data retrieval difficult. Additionally, streamflow statistics and basin characteristics are most often needed at ungaged locations (locations without streamgages) for which published streamflow statistics and basin characteristics do not exist. Missouri StreamStats is a web-based geographic information system that was created by the USGS in cooperation with the Missouri Department of Natural Resources to provide users with access to an assortment of tools that are useful for water-resources planning and management. StreamStats allows users to easily obtain the most recent published streamflow statistics and basin characteristics for streamgage locations and to automatically calculate selected basin characteristics and estimate streamflow statistics at ungaged locations.

Missouri↗