EXPLORE THE ARCHIVE

Jamison Haase Steidl

Publications and source records attributed to Jamison Haase Steidl.

4 recordsLinked to original sources

USGS2025

Near-surface material and topography generate anomalous high-frequency ground motion amplification in Chugiak, Alaska

An ∼3 km long nodal array oriented approximately east–west was deployed in Chugiak, Alaska, by the U.S. Geological Survey during 2021. The array intersects with the permanent NetQuakes station NP.ARTY, where peak ground acceleration (PGA) value of 1.98 g was recorded during the 2018 M w 7.1 Anchorage, Alaska, earthquake, in sharp contrast to the PGA of ∼0.3 g at a site just 4 km to the west. Seismic data for M w 1.8–4.3 aftershocks from the M w 7.1 event recorded by the nodal array confirm the anomalously large ground motions obtained at NP.ARTY as well as similar amplifications at nodes within ∼1 km to the east. Here, we performed 0–10 Hz 3D finite‐difference simulations, including high‐resolution surface topography, to explore the cause of the unexpectedly large amplification. As expected, the simulations computed with a regional 3D tomography velocity model severely underpredict the 0–10 Hz acceleration records at almost all sites. Adding a near‐surface low‐velocity taper to 300 m depth amplifies the accelerations by up to a factor of 5 and enables a reasonable match between the nodal data and simulations at sites to the west of NP.ARTY. However, this model still underpredicts the spectral energy in the area covered by glacial sediments by up to an order of magnitude. The addition of a till layer using a depth‐dependent shear‐wave velocity ( ⁠⁠ V s ) profile along with a homogeneous, 8 m thick low‐velocity layer with V s = 250 m/s representing the kame terraces improves the fit to data to within a factor of 2 at nodes located on top of the glacial sediments. Our study shows that the anomalously large high‐frequency amplification recorded at and near NP.ARTY can be explained by a combination of topographic effects and near‐surface low‐velocity material with amplification effects on the high‐frequency ground motion by up to about 40% and an order of magnitude, respectively.

Alaska↗

USGS2025

International data gaps at the Center for Engineering Strong Motion Data

The Center for Engineering Strong Motion Data (CESMD) is utilized by seismologists, engineers, and disaster management professionals in the US and has historically achieved and distributed waveforms from across the globe for significant earthquakes. The increased access to the waveforms via Web API (Application Programming Interface) offers a unique opportunity to provide the community complete datasets, sampling a variety of tectonic environments and geologic conditions, increasing the number of available ground motion records for use in ground motion models (GMMs) and improving the accuracy of earthquake engineering evaluations. The objective of this study is to programmatically identify gaps in global event data from the past decade and backfill missing data gaps at CESMD. We first compare the CESMD catalog with the Advanced National Seismic System (ANSS) Comprehensive Earthquake Catalog identifying regions and time periods where strong-motion data is limited or inadequate. To backfill datasets at CESMD for significant events, we pinpoint regions and time intervals that lack information, creating a list of events for which we’d like to obtain data. An important facet of this work is identifying the source of data and metadata across earthquake repositories around the world and integrating these data repositories into our current strong-motion data processing workflow. In parallel with these newly processed datasets, we are developing a script to produce data origination citations to include provenance and attribution information to associate with respective datasets at CESMD. We showcase our methodology for identifying and filling data gaps at CESMD using three case studies (the 2018 Anchorage Alaska earthquake sequence, seismicity associated with the 2018 Hawaiian Kilauea volcano eruption, and several earthquakes in Turkey) and then outline our strategy to apply our data gap backfilling methods on an international scale.

Conference Paper↗

USGS2024

A journey to the center of the USGS National Strong-motion Project processing and beyond

The United States Geological Survey (USGS) National Strong Motion Project (NSMP) has the primary U.S. government responsibility to acquire, process, and disseminate significant strong-motion earthquake ground motion records measured at surficial free-field stations, structures (buildings, dams, and bridges, and geotechnical arrays to the earthquake engineering community. As a result of the deployment of modern seismic instrumentation and growth of tools such as web-services, earthquake data from U.S. and international seismic networks are more accessible than ever. Our mission is to provide raw and processed strong-motion waveforms with PGA values greater than 0.1%g for M3.0 earthquakes and larger in California and M4.0 and larger within the conterminous US, Hawaii, Puerto Rico, and Alaska. Datasets of interest to the engineering and geophysics communities, such as event sequences in areas of induced seismicity and significant global events, are also processed and posted at the Center for Engineering Strong Motion Data (CESMD) at strongmotioncenter.org when available through collaboration with the international strong-motion data community. Here we outline (1) the NSMP’s current workflow to acquire, process, and distribute data at CESMD; (2) our new endeavours and collaborations focusing on comparison and integration of waveform processing software, development of techniques for metadata quality checks before and after earthquakes, and construction of a dynamic site characterization repository; and (3) our topics for possible collaboration topics across the global strong-motion community.

Conference Paper↗

USGS2024

New developments at the Center for Engineering Strong-Motion Data (CESMD)

The Center for Engineering Strong-Motion Data (CESMD), an internationally utilized joint center of the U.S. Geological Survey (USGS) and the California Geological Survey (CGS), provides a single access point for earthquake strong-motion records and station metadata from the CGS California Strong-Motion Instrumentation Program (CSMIP), the USGS National Strong-Motion Project (NSMP), the USGS Advanced National Seismic System, and other affiliates. The CESMD has been continuously improving its webtools to facilitate the access of strong-motion data and metadata for use in post-earthquake response and for scientific and engineering research applications. The Center provides raw and processed strong-motion data via the Engineering Data Center (EDC) and the Virtual Data Center (VDC) web portals. This paper focuses on the strong-motion products provided by the EDC where more than 48,000 records with peak ground accelerations greater than 0.1% g from over 2400 earthquakes are currently hosted. and on the ongoing efforts to develop data access tools and applications. The new developments and ongoing efforts in the EDC include: 1) enhancements to the CESMD webservices to facilitate access to station metadata, earthquake information, and strong motion records 2) new features to the interactive map interface, improving the visualization and access to earthquake, station, and record information, 3) efforts to develop a new web application tool for data format conversion from a number of data formats, 4) efforts to unify varying waveform data formats into a consistent format, 5) ongoing efforts to compile seismic station site geology, measured or inferred Vs30 values, shear-wave profiles, NEHRP site class, and available structural instrument deployment schematics, and 6) a special studies pages for research topic-specific ground motion datasets that offer uniform processing of records from a variety of sources.

Conference Paper↗