Geology topics

James R. Ursic

Publications and source records attributed to James R. Ursic.

3 recordsLinked to original sources

USGS2011

Accuracy of flowmeters measuring horizontal groundwater flow in an unconsolidated aquifer simulator.

Borehole flowmeters that measure horizontal flow velocity and direction of groundwater flow are being increasingly applied to a wide variety of environmental problems. This study was carried out to evaluate the measurement accuracy of several types of flowmeters in an unconsolidated aquifer simulator. Flowmeter response to hydraulic gradient, aquifer properties, and well-screen construction was measured during 2003 and 2005 at the U.S. Geological Survey Hydrologic Instrumentation Facility in Bay St. Louis, Mississippi. The flowmeters tested included a commercially available heat-pulse flowmeter, an acoustic Doppler flowmeter, a scanning colloidal borescope flowmeter, and a fluid-conductivity logging system. Results of the study indicated that at least one flowmeter was capable of measuring borehole flow velocity and direction in most simulated conditions. The mean error in direction measurements ranged from 15.1 degrees to 23.5 degrees and the directional accuracy of all tested flowmeters improved with increasing hydraulic gradient. The range of Darcy velocities examined in this study ranged 4.3 to 155 ft/d. For many plots comparing the simulated and measured Darcy velocity, the squared correlation coefficient (r 2 ) exceeded 0.92. The accuracy of velocity measurements varied with well construction and velocity magnitude. The use of horizontal flowmeters in environmental studies appears promising but applications may require more than one type of flowmeter to span the range of conditions encountered in the field. Interpreting flowmeter data from field settings may be complicated by geologic heterogeneity, preferential flow, vertical flow, constricted screen openings, and nonoptimal screen orientation.

Ground Water Monitoring and Remediation↗

USGS2004

A cross-site comparison of methods used for hydrogeologic characterization of the Galena-Platteville aquifer in Illinois and Wisconsin, with examples from selected Superfund sites

The effectiveness of 28 methods used to characterize the fractured Galena-Platteville aquifer at eight sites in northern Illinois and Wisconsin is evaluated. Analysis of government databases, previous investigations, topographic maps, aerial photographs, and outcrops was essential to understanding the hydrogeology in the area to be investigated. The effectiveness of surface-geophysical methods depended on site geology. Lithologic logging provided essential information for site characterization. Cores were used for stratigraphy and geotechnical analysis. Natural-gamma logging helped identify the effect of lithology on the location of secondary- permeability features. Caliper logging identified large secondary-permeability features. Neutron logs identified trends in matrix porosity. Acoustic-televiewer logs identified numerous secondary-permeability features and their orientation. Borehole-camera logs also identified a number of secondary-permeability features. Borehole ground-penetrating radar identified lithologic and secondary-permeability features. However, the accuracy and completeness of this method is uncertain. Single-point-resistance, density, and normal resistivity logs were of limited use. Water-level and water-quality data identified flow directions and indicated the horizontal and vertical distribution of aquifer permeability and the depth of the permeable features. Temperature, spontaneous potential, and fluid-resistivity logging identified few secondary-permeability features at some sites and several features at others. Flowmeter logging was the most effective geophysical method for characterizing secondary-permeability features. Aquifer tests provided insight into the permeability distribution, identified hydraulically interconnected features, the presence of heterogeneity and anisotropy, and determined effective porosity. Aquifer heterogeneity prevented calculation of accurate hydraulic properties from some tests. Different methods, such as flowmeter logging and slug testing, occasionally produced different interpretations. Aquifer characterization improved with an increase in the number of data points, the period of data collection, and the number of methods used.

Scientific Investigations Report↗

USGS2001

Geology, hydrology, and water quality in the vicinity of a brownfield redevelopment site in Canton, Illinois

The U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency and Environmental Operations, Inc., assisted in the characterization of the geology, hydrology, and water quality at a Brownfield redevelopment site in Canton, Illinois. The investigation was designed to determine if metals and organic compounds historically used in industrial operations at the site resulted in a threat to the water resources in the area. The hydraulic units of concern in the study area are the upper semiconfining unit, the sand aquifer, and the lower semiconfining unit. The upper semiconfining unit ranges from about 1 to 19 feet in thickness and is composed of silt-and clay deposits with a geometric mean vertical hydraulic conductivity of 7.1 ? 10-3 feet per day. The sand aquifer is composed of a 1 to 5.5 foot thick sand deposit and is considered the primary pathway for ground-water flow and contaminant migration from beneath the study area. The geometric mean of the horizontal hydraulic conductivity of the sand aquifer was calculated to be 1.8 feet per day. The direction of flow in the sand aquifer is to the east, south, and west, away from a ground-water ridge that underlies the center of the site. Ground-water velocity through the sand aquifer ranges from 7.3 ? 10-2 to 2.7 ? 10-1 feet per day. The lower semiconfining unit is composed of sandy silt-and-clay deposits with a geometric mean vertical hydraulic conductivity of 1.1 ? 10-3 feet per day. Volatile organic compounds were detected in ground water beneath the study area. Pesticide compounds were detected in ground water in the western part of the study area. Partial or complete degradation of some of the volatile organic and pesticide compounds is occurring in the soils and ground water beneath the study area. Concentrations of most of the metals and major cations in the ground water show some variation within the study area and may be affected by the presence of a source area, pH, oxidation-reduction potential, precipitation-dissolution reactions, and ion exchange reactions. Antimony, thallium, and 1,1-dichloroethane were detected in water samples from one well each at concentrations above their respective U.S. Environmental Protection Agency maximum contaminant levels.

Open-File Report↗