Geology topics

James E. Conrad

Publications and source records attributed to James E. Conrad.

At least 19 recordsLinked to original sources

USGS2025

Reconstructing late Pleistocene relative sea levels on transgressed shelves: An example from central California

Although prevalent for the late Holocene, relative sea level (RSL) constraints during and immediately after the Last Glacial Maximum (LGM) are sparse. This scarcity of data is particularly pronounced along mid-latitude shelves such as central California, which lack post LGM RSL constraints older than 12 ka. In this study we collected 7 sediment cores and high-resolution seismic data from Estero Bay to constrain RSLs across the central California shelf between ∼9 and ∼16 ka. We reconstructed these RSLs using two sea-level indicators found within our sediment cores: the wave ravinement shell hash burial surface (WRSHBS) and the sedimentary contact between offshore mud facies and ripple cross-laminated sands. To determine the indicative meaning of these two sea-level indicators, we examined the relationship between the local wave regime, modern bathymetric profiles, and the depth of preservation of each sea-level indicator. After correcting for tectonic uplift, we estimated sea levels in central California to have been ∼39 ± 7.5 and 49 ± 7.5 m below present sea level between 9 and 12 ka, in agreement with previous RSL reconstructions along this coast. Between 13.8 and 15.9 ka, we estimate sea levels to have reached ∼86 ± 8–99 ± 8 m below present sea level. Our findings offer a Late Pleistocene RSL reconstruction for central California and develop new methodologies for estimating past RSLs on similar mid-latitude shelves.

California↗

USGS2024

A comprehensive assessment of submarine landslides and mass wasting processes offshore southern California

It is critical to characterize submarine landslide hazards near dense coastal populations, especially in areas with active faults, which can trigger slope failure, subsequent tsunamis, and damage seabed infrastructure during earthquake shaking. Offshore southern California, numerous marine geophysical surveys have been conducted over the past decade, and high-resolution bathymetric and subsurface data now cover about 60 percent of the total region between Point Conception and the United States-Mexico border from the California coast out to the base of Patton Escarpment ∼200 km offshore. In a comprehensive compilation and interpretive mapping effort, we find evidence of seafloor failure throughout offshore southern California with nearly 1,500 submarine landslide-related features, including 63 discrete slide deposits with debris and >1,400 slide-related scarps. In our analysis, we highlight new mapping of submarine landslides in Catalina Basin, the Del Mar slide, the San Gabriel slide complex, and the 232 km 2 San Nicolas slide, the largest area of any known submarine landslide mass offshore southern California. Analysis of the spatial distribution of submarine landslide features suggests that most mapped slide features are located relatively near coastal sediment sources, particularly during sea-level lowstand conditions, which underscores the importance of sediment supply and sediment accumulation on low-gradient slopes as failure preconditioning processes. Tectonically driven uplift at shelf edges and along basin flanks is another key preconditioning factor, and our results also suggest that earthquakes along active faults trigger mass wasting, especially for repeated, small-scale failures on tectonically steepened slopes.

California↗

USGS2023

High-resolution geophysical and geochronological analysis of a relict shoreface deposit offshore central California: Implications for slip rate along the Hosgri fault

The Cross-Hosgri slope is a bathymetric lineament that crosses the main strand of the Hosgri fault offshore Point Estero, central California. Recently collected chirp seismic reflection profiles and sediment cores provide the basis for a reassessment of Cross-Hosgri slope origin and the lateral slip rate of the Hosgri fault based on offset of the lower slope break of the Cross-Hosgri slope. The Cross-Hosgri slope is comprised of two distinct stratigraphic units. The lower unit (unit 1) overlies the post–Last Glacial Maximum transgressive erosion surface and is interpreted as a Younger Dryas (ca. 12.85–11.65 ka) shoreface deposit based on radiocarbon and optically stimulated luminescence (OSL) ages, Bayesian age modeling, seismic facies, sediment texture, sediment infauna, and heavy mineral component. The shoreface was abandoned and partly eroded during rapid sea-level rise from ca. 11.5 to 7 ka. Unit 2 consists of fine sand and silt deposited in a midshelf environment when the rate of sea-level rise slowed between ca. 7 ka and the present. Although unit 2 provides a thin, relatively uniform cover over the lower slope break of the older shoreface, this feature still represents a valuable piercing point, providing a Hosgri fault slip rate of 2.6 ± 0.8 mm/yr. Full-waveform processing of chirp data resulted in significantly higher resolution in coarser-grained strata, which are typically difficult to interpret with more traditional envelope processing. Our novel combination of offshore radiocarbon and OSL dating is the first application to offshore paleoseismic studies, and our results indicate the utility of this approach for future marine neotectonic investigations.

California↗

USGS2023

Diving deeper into seep distribution along the Cascadia Convergent Margin, USA

Previous margin-wide studies of methane seep distribution along the Cascadia Subduction Zone indicate peaks in seep density within the landward limit of the of gas hydrate stability zone (GHSZ; ≤500 m depth), suggesting a link between current ocean warming, acceleration of hydrate dissociated, and methane emissions. This inferred connection, however, may not account for regional geologic and/or structural complexities driving methane seepage. Expanding upon an existing seep database by adding new seeps data, we conducted statistical and spatial analyses to determine margin-wide distribution trends and offer a tectonic framework for understanding the tendency toward non-normality and spatial clustering. We then highlight the role of local-scale drivers of seep formation in addition to the first-order tectonic framework, using systematic geologic/geomorphic characterization of seep emission sites in southern Cascadia and case studies using meta-attribute analysis of seismic reflection data.. Seep distribution along the margin is non-random, but instead of clustering along the 500-m isobath, regions of high seep density occur in canyons and topographic highs. New findings from this study conclude that co-location of the outer arc high (OAH) and the landward limit of the GHSZ may explain high concentrations of seeps where deformation is the greatest and hydrates are unstable. Detailed analysis of the spatial relationships between seep sites and geologic-geomorphic features in southern Cascadia reveal a link between seeps and anticlines, with 52% of the seeps found in association with anticlines, 36% found at faults, 16% associated with canyons, and 11% at seafloor failure scarps. Given that a majority of anticlines are located along or seaward of the OAH in the actively deforming outer wedge, we suggest that the location of the OAH is a primary structural control on seep distribution. This scenario is supported by neural network analysis of multichannel seismic data revealing zones of probable fluid migration along vertical pipes, faults, and chimneys in the vicinity of active seep sites on anticlines. Determining linkages between seeps and submarine tectonic geomorphology is a crucial first step for understanding and forecasting the distribution of methane seepage, but also a necessity for evaluating causal relationships between ocean warming and gas-hydrate stability.

California, Oregon, Washington↗

USGS2023

Wide-area debris field and seabed characterization of a deep ocean dump site surveyed by autonomous underwater vehicles

Disposal of industrial and hazardous waste in the deep ocean was a pervasive global practice near coastlines in the 20th century. Uncertainty in the quantity, location, and contents of dumped materials at historical disposal sites underscores ongoing risks to marine ecosystems and human health. This study presents analysis of a 150-km2 wide-area sidescan sonar survey conducted in March 2021 with two autonomous underwater vehicles (AUVs) at an offshore dumpsite in San Pedro Basin, California. Previous camera surveys located 60 barrels and other debris; sediment analysis in the region showed varying concentrations of the insecticidal chemical Dichlorodiphenyl-trichloroethane (DDT), for which an estimated 350-700 metric tons was discarded in the San Pedro Basin between 1947 and 1961. A lack of primary historical documents from Montrose Chemical or California Salvage Company that specify the DDT acid waste disposal method has contributed to the ambiguity surrounding whether the dumping method was via bulk discharge or containerized units. Barrels and debris visually detected during previous surveys by Remotely Operated Vehicles (ROVs) Jason and SuBastian and AUV Sentry served as the basis for ground truth testing and object classification using size and acoustic intensity characteristics. Target detection and classification algorithms were developed using image and signal processing techniques that resulted in the identification of over 74,000 debris targets within the survey region. Statistical, spectral, and machine learning techniques are used to characterize seabed variability and for bottom-type classification. These analytical techniques combined with the survey capabilities of AUVs provide a framework for efficient mapping and characterization of uncharted deep-water disposal sites.

California↗

USGS2023

Subaqueous clinoforms created by sandy wave-supported gravity flows: Lessons from the central California shelf

Subaqueous clinoforms are an important yet underappreciated shelf feature. Their origins are typically associated with subaerial deltas but recent work has identified similar features in settings without a significant fluvial source. These other studies have shown that such subaqueous clinoforms, also known as infralittoral prograding wedges (IPWs), are created largely by wave-induced processes. This study uses geophysical, sedimentological, and radiocarbon data to determine the sedimentary characteristics and genesis of a shore-parallel subaqueous clinoform developed far from any significant river on the central California continental shelf; a feature known locally as the Cross Hosgri Slope. Sediment cores through the feature reveal that it is composed of beds with an erosive base, followed by a thin coarsening upward sequence of shelly fine sands transitioning to a fining upward sequence marked by alternating parallel and ripple cross laminated very fine sands. The deposit is often capped by fine silts that are commonly interbedded with thin very fine sand beds. Radiocarbon dating of shells within the cores paired with seismic profiles indicate the subaqueous clinoform initiated progradation ~7 ka, nucleating on an older Younger Dryas relict shoreface. We suggest the CHS was created by winter-storm waves mobilizing sands in water depths up to ~ 70 m that transitioned into wave-supported gravity flows. The wave-supported gravity flows traveled downslope to water depths of up to ~85 m, corresponding to the foot of the subaqueous clinoform. They did not travel beyond this depth as wave influence at these depths is negligible and the shelf slope is insufficient to maintain movement of the load alone. Our work suggests that wave-supported gravity flows can entrain very fine sands and silts and build subaqueous clinoforms, even in the absence of a significant river source. Furthermore, we provide a facies model for sandy wave-supported gravity flow deposits.

California↗

USGS2022

Compilation of existing data for sand resource studies in Federal and California State Waters of the San Francisco, Oceanside, and Silver Strand littoral cell study areas along the continental shelf of California—Strategy for field studies and sand resource assessment

California↗

USGS2022

Assessment of significant sand resources in Federal and California State Waters of the San Francisco, Oceanside, and Silver Strand littoral cell study areas along the continental shelf of California

Executive Summary The Sand Resources Project was established through collaborative agreements between the U.S. Geological Survey (USGS), the Bureau of Ocean Energy Management (BOEM), and the California Ocean Protection Council (OPC) with the purpose of evaluating sand and gravel resources in Federal and California State Waters for potential use in future beach-nourishment projects. Project partners worked in collaboration with California Coastal Sediment Management Workgroup (CSMW) members to define priority study areas for this work based on the potential for finding sand within the broader region and the needs for this sand as shown by beach erosion areas of concern in the adjacent littoral cells. The final study areas were defined to be (1) the San Francisco Littoral Cell, (2) the Oceanside Littoral Cell, and (3) the Silver Strand Littoral Cell. A two-stage approach was used to assess the study areas. The initial stage was a synthesis of the existing geophysical and sediment-sampling data in each area. This allowed for evaluations of the data availability, data gaps, and general patterns of sediment thickness and grain size. This synthesis was published in a separate USGS open-file report (Warrick and others, 2022). The findings from this assessment were used to refine study area boundaries and develop sampling plans for stage two of the project. Stage two of the project is the collection, processing, and synthesis of new data, including high-resolution geophysical surveys and sediment cores—this report addresses the second stage. The work focuses on two of the study areas—the San Francisco and the Oceanside Littoral Cells, where several research cruises have been conducted. A more limited, exploratory approach was used for the Silver Strand Littoral Cell, owing to the lack of existing high-resolution bathymetric data for this study area. The data collected provide new information about the three study areas, including sediment thickness, grain-size distributions, and total organic carbon. Sediment in all three study areas of the Sand Resources Study was suitable for beach nourishment, as reflected by their grain-size distributions and sediment thicknesses. For example, sandy sediment in the San Francisco Littoral Cell study area was on and immediately outside of the ebb-tidal bar of the San Francisco Bay, a landform that has a strong influence on grain-size patterns of the region. The presence of thick sediment deposits in this area was interpreted to be a function of tectonics, which has caused physical features that include a graben north of the Golden Gate whose deposits were thicker and siltier than the remaining area. Sandy sediment on the inner and outer parts of the continental shelf in the Oceanside Littoral Cell may be useful for nourishment, whereas the midshelf between these areas was dominated by silty sediment. Sediment in the Silver Strand Littoral Cell, which was only sampled selectively, had the greatest potential for beach nourishment because of the greater prevalence of beach-comparable grain sizes, especially in the more distal and deeper areas where medium sands were found. The Sand Resources Project did identify several sandy regions of the continental shelf that are deeper than dredging technologies currently (2022) available in the United States, which are generally limited to 30 meters (m) water depth or less. Although sandy sediment exists in all three study areas at water depths of 30 m or less, additional sediment supplies—most of which are in Federal Waters—are present in deeper settings, especially for the Oceanside and Silver Strand Littoral Cell study areas. Although the Silver Strand Littoral Cell study area was found to be considerably replete in sand resources, these conclusions are based on a limited sampling exercise across that study area. Thus, it may be beneficial to complete a more thorough characterization of the sediment resources in the Silver Strand Littoral Cell study area if it is determined that a need for sandy coastal sediment exists in this region. As a result of the Sand Resources Project, several areas of sand resources in Federal and California State Waters were found where they were previously unknown. As such, this project may provide important data for future coastal-management decisions in California, and it should provide a model for future investigations of sediment resources in other regions of the State.

California↗

USGS2021

Colored shaded-relief bathymetry, acoustic backscatter, and selected perspective views of the northern part of the California Continental Borderland, southern California

The California Continental Borderland is the complex continental margin in southern California that extends from Point Conception southward into northern Baja California (Fisher and others, 2009). This colored shaded-relief bathymetry map of the northern continental borderland in southern California was generated primarily from multibeam-echosounder data collected by the University of Washington in 2016, the Ocean Exploration Trust-Nautilus Exploration Program in 2015–17, and the National Oceanic and Atmospheric Administration in 2017. These datasets were processed in part by the U.S. Geological Survey. Additional smaller amounts of publicly available multibeam-bathymetry data collected by other federal and local agencies, academic institutions, and private firms were also incorporated into this map. Since the production of this map, other multibeam-bathymetry data have been collected in this region.

California↗

USGS2020

Focused fluid flow and methane venting along the Queen Charlotte fault, offshore Alaska (USA) and British Columbia (Canada)

Fluid seepage along obliquely deforming plate boundaries can be an important indicator of crustal permeability and influence on fault-zone mechanics and hydrocarbon migration. The ~850-km-long Queen Charlotte fault (QCF) is the dominant structure along the right-lateral transform boundary that separates the Pacific and North American tectonic plates offshore southeastern Alaska (USA) and western British Columbia (Canada). Indications for fluid seepage along the QCF margin include gas bubbles originating from the seafloor and imaged in the water column, chemosynthetic communities, precipitates of authigenic carbonates, mud volcanoes, and changes in the acoustic character of seismic reflection data. Cold seeps sampled in this study preferentially occur along the crests of ridgelines associated with uplift and folding and between submarine canyons that incise the continental slope strata. With carbonate stable carbon isotope (δ 13 C) values ranging from −46‰ to −3‰, there is evidence of both microbial and thermal degradation of organic matter of continental-margin sediments along the QCF. Both active and dormant venting on ridge crests indicate that the development of anticlines is a key feature along the QCF that facilitates both trapping and focused fluid flow. Geochemical analyses of methane-derived authigenic carbonates are evidence of fluid seepage along the QCF since the Last Glacial Maximum. These cold seeps sustain vibrant chemosynthetic communities such as clams and bacterial mats, providing further evidence of venting of reduced chemical fluids such as methane and sulfide along the QCF.

Alaska, British Columbia↗

USGS2020

Morphology, structure, and kinematics of the San Clemente and Catalina faults based on high-resolution marine geophysical data, southern California Inner Continental Borderland

Catalina Basin, located within the southern California Inner Continental Borderland (ICB), is traversed by two active submerged fault systems that are part of the broader North America-Pacific plate boundary: the San Clemente fault (along with a prominent splay, the Kimki fault) and the Catalina fault. Previous studies have suggested that the San Clemente fault (SCF) may be accommodating up to half of the approximately 8 mm/yr right-lateral slip distributed across the ICB between San Clemente Island and the mainland coast, and that the Catalina fault (CF) acts as a significant restraining bend in the larger transform system. Here, we provide new high-resolution geophysical constraints on the seabed morphology, deformation history, and kinematics of the active faults in and on the margins of Catalina Basin. We significantly revise SCF mapping and describe a discrete releasing bend that corresponds with lows in gravity and magnetic anomalies, as well as a connection between the SCF and the Santa Cruz fault to the north. Subsurface seismic-reflection data show evidence for a vertical SCF with significant lateral offsets, while the CF exhibits lesser cumulative deformation with a vertical component indicated by folding adjacent to the CF. Geodetic data are consistent with SCF right-lateral slip rates as high as ~3.6 mm/yr and transpressional convergence of <1.5 mm/yr accommodated along the CF. The Quaternary strands of the SCF and CF consistently cut across Miocene and Pliocene structures, suggesting generation of basin and ridge morphology in a previous tectonic environment that has been overprinted by Quaternary transpression. Some inherited crustal fabrics, especially thinned crust and localized, relatively hard crustal blocks, appear to have had a strong influence on the geometry of the main trace of the SCF, whereas inherited faults and other structures (e.g., the Catalina Ridge) appear to have minimal influence on the geometry of active faults in the ICB.

California↗

USGS2020

Mapping, exploration, and characterization of the California continental margin and associated features from the California-Oregon border to Ensenada, Mexico

Priority Geographic Area: Both within and outside US Exclusive Economic Zone (EEZ). California continental margin. This area includes and continues south of the geographic area captured in the Watt et al. white paper. Description of Priority Area: The California continental margin, from the narrow shelf to abyssal depths, contains diverse seafloor features that influence benthic community types, biological connectivity, and is associated with significant seafloor geohazards. These complex features include marginal basins, depositional slopes, submarine canyons, ridges, and seamounts, and seep environments as a result of fluid seeps along active faults. Water column characteristics are variable, with steep gradients in current velocities, which influence sediment transport, from depositional fans (slow flow, muddy) to submarine canyons and seamounts (high currents, rocky, rugged terrain). These features and associated environments can influence the distribution of deep-sea habitats, including coral and sponge communities. South of the region described in the Watt et al. and Demopoulos et al. white papers, plentiful seeps occur from northern California down to the southern California Borderland. However, the underlying foundational geology associated with these seeps varies along the margin, changing with contrasting tectonic settings, from convergent tectonics to regions dominated by strike-slip faulting (Barry et al. 1996; Paull et al. 2008; Bernardo and Smith 2010; Maloney et al. 2015). For seeps located off southern California, the relationship to strike-slip fault systems may influence the distribution of seep fluid expulsion sites and associated seep habitats (Maloney et al. 2015; Grupe et al. 2015; Conrad et al., 2017), where transpression plays a key role in formation and localization of fluid seeps. Further exploration is required in order to understand these connections. Several submarine canyons intersect the shelf within this region, serving as important channels of energy and transport of sediment from shelf to slope depths. Canyons are typically associated with high currents, turbidity flows, steep and rugged terrain, and high food availability, all of which structures canyon communities and supports hotspots of biodiversity. Specific canyons along the California margin that have been well studied include Scripps and La Jolla Canyons off San Diego, and Monterey Canyon off Monterey, but many more remain relatively unexplored. Commercially important species of fish and invertebrates have been found associated with canyons, as well as deep-sea corals and sponges (e.g., Barry et al. 1996). However, in contrast to their Atlantic counterparts (e.g., through ACUMEN and ASPIRE campaigns) there has been a dearth of exploration and characterization of canyons along the California margin. A number of questions remain regarding canyon and slope wall stability and associated geohazards, plus, how the canyons connect and influence the broader regional biogeography of benthic communities is unknown. Due to their topography, seamounts along the California margin are characterized by steep slopes, large areas of rocky substrate, and high currents. Hydrological complexity is associated with seamounts given they impinge different watermasses, depending on depth range. This heterogeneity yields complex and diverse benthic communities, including commercially important fishes (e.g., Tracey et al., 2012). The geology of Davidson, Pioneer, San Juan, and Rodriquez Seamounts has received considerable study (e.g., Davis et al., 2010) but other seamounts are less known, including how they are biologically and ecologically connected. For example, research comparing the benthic communities associated with Rodriguez and San Juan Seamounts, located outside of the Channel Islands National Marine Sanctuary and within the proposed Chumash Heritage National Marine Sanctuary, to communities found within the sanctuary is critical for managing and protecting resources within the sanctuary and modifying sanctuary boundaries. Exploration would yield the data needed to delineate and characterize essential fish habitats, and deep-sea coral and sponge communities, thus directly connecting the utility of exploration and discovery to decision making. The southern California Borderland is a geomorphologically heterogeneous area created by a complex network of faults, containing deep basins separated by shallow ridges and islands. Persistent fault-related deformation has created complex features, such as exposure of scarps and uplift rocks/ridges, seeps, erosional terraces, hydrate mounds, and mud volcanoes that provide support for thriving benthic communities. That said, significant oxygen minimum zones and low aragonite saturation states persist within several of the basin environments, influencing energy flow, community ecology, and calcification. For example, the combined effects of hypoxia and acidification pose serious threats to marine organisms and biological resources along the California margin. Mapping and exploration of the extensive faults and fault scarps can help constrain historical earthquake activity. But many questions remain regarding how the underlying geology and geological processes have shaped the biological communities.

California↗

USGS2019

Commentary: Variability in shelf sedimentation in response to fluvial sediment supply and coastal erosion over the past 1,000 Years in Monterey Bay, CA, United States

A commentary on: Variability in Shelf Sedimentation in Response to Fluvial Sediment Supply and Coastal Erosion Over the Past 1,000 Years in Monterey Bay, CA, United States. by Carlin J., Addison J., Wagner A., Schwartz V., Hayward J., Severin V. (2019) Front. Earth Sci., 7:113. doi: 10.3389/feart.2019.00113

Frontiers in Earth Science↗

USGS2019

The Santa Cruz Basin submarine landslide complex, southern California: Repeated failure of uplifted basin sediment

The Santa Cruz Basin (SCB) is one of several fault-bounded basins within the California Continental Borderland that has drawn interest over the years for its role in the tectonic evolution of the region, but also because it contains a record of a variety of modes of sedimentary mass transport (i.e., open slope vs. canyon-confined systems). Here, we present a suite of new high-resolution marine geophysical data that demonstrate the extent and significance of the SCB submarine landslide complex in terms of late Miocene to present basin evolution and regional geohazard assessment. The new data reveal that submarine landslides cover an area of ~160 km2 along the eastern flank of the Santa Rosa–Cortes Ridge and have emplaced a minimum of 9 to 16 km3 of mass transport deposits along the floor of the SCB during the Quaternary. The failures occur along an onlapping wedge of Pliocene sediment that was uplifted and tilted during the later stages of basin development. The uplifted and steepened Pliocene strata were preconditioned for failure so that parts of the section failed episodically throughout the Quaternary—most likely during large earthquakes. Once failed, the material initially translated as a block glide along a defined failure surface. As transport continued several kilometers across a steep section of the lower slope, the material separated into distinctive proximal and distal components. The failed masses mobilized into debris flows that show evidence for dynamic separation into less and more mobile components that disturbed and eroded underlying stratigraphy in areas most proximal to the source area. The most highly mobilized components and those with the lowest viscosity and yield strength produced flows that blanket the underlying stratigraphy along the distal reaches of deposition. The estimated volumes of individual landslides within the complex (0.1–2.6 km3), the runout distance measured from the headwalls (>20 km), and evidence for relatively high velocity during initial mobilization all suggest that slides in the SCB may have been tsunamigenic. Because many slopes in the California Continental Borderland are either sediment starved or have experienced sediment bypass during the Quaternary, we propose that uplift and rotation of Pliocene deposits are important preconditioning factors for slope failure that need to be systematically evaluated as potential tsunami initiators.

California↗

USGS2018

The tectonically controlled San Gabriel Channel–Lobe Transition Zone, Catalina Basin, Southern California Borderland

High-resolution geophysical data across the Catalina Basin, offshore southern California, USA, reveal a complex channel–lobe transition zone (CLTZ) and provide an opportunity to characterize an entire seafloor CLTZ in a tectonically active and confined-basin setting. The seafloor morphology, distribution of depositional and erosional features, and location of depocenters in the CLTZ are controlled by shifting confinement and seafloor gradient related to inherited basement structures, active faults, and basin margins. Below a Holocene hemipelagic drape, the Catalina Basin is dominated by CLTZ and lobe sedimentation from the San Gabriel Channel, with lesser accumulations from local sediment sources limited to basin margins. The San Gabriel Channel is structurally confined as it enters the Catalina Basin and appears unable to avulse; it continues into the basin as a channel that rapidly widens, decreases in relief, and becomes scoured at its margins. A CLTZ is imaged between the confined San Gabriel channel and its terminal lobes deposited > 50 km into the basin. Narrow, apparently disconnected channels with knickpoints occur throughout the proximal and mid-CLTZ and are concentrated near basement highs and basin-bounding Quaternary-active dextral strike-slip faults. A field of small-scale erosional crescent-shaped scours (∼ 100 m length, ∼ 200 m width, up to ∼ 10 m relief across ∼ 30 km 2 region) occurs above a partially buried basement high that creates perturbations in seafloor gradient. Likewise, above a buried basement structure that locally increases seafloor gradient (up to 0.4°), the distal CLTZ may contain sediment waves (∼ 2–4 m wave height and ∼ 200–300 m wavelength) that are smaller than many other CLTZ examples. This study of the San Gabriel CLTZ in Catalina Basin provides high-resolution geophysical data coverage of a complete CLTZ and illustrates a tectonically controlled end-member CLTZ from the modern seafloor.

Journal of Sedimentary Research↗

USGS2018

Slope failure and mass transport processes along the Queen Charlotte Fault Zone, western British Columbia

Multibeam echosounder (MBES) images, 3.5 kHz seismic-reflection profiles and piston cores obtained along the southern Queen Charlotte Fault Zone are used to map and date mass-wasting events at this transform margin – a seismically active boundary that separates the Pacific Plate from the North American Plate. Whereas the upper continental slope adjacent to and east (upslope) of the fault zone offshore of the Haida Gwaii is heavily gullied, few large-sized submarine landslides in this area are observed in the MBES images. However, smaller submarine seafloor slides exist locally in areas where fluid flow appears to be occurring and large seafloor slides have recently been detected at the base of the steep continental slope just above its contact with the abyssal plain on the Queen Charlotte Terrace. In addition, along the subtle slope re-entrant area offshore of the Dixon Entrance shelf bathymetric data suggest that extensive mass wasting has occurred in the vicinity of an active mud volcano venting gas. We surmise that the relative lack of submarine slides along the upper slope in close proximity to the Queen Charlotte Fault Zone may be the result of seismic strengthening (compaction and cohesion) of a sediment-starved shelf and slope through multiple seismic events.

British Columbia↗

USGS2018

Slope failure and mass transport processes along the Queen Charlotte Fault, southeastern Alaska

The Queen Charlotte Fault defines the Pacific–North America transform plate boundary in western Canada and southeastern Alaska for c. 900 km. The entire length of the fault is submerged along a continental margin dominated by Quaternary glacial processes, yet the geomorphology along the margin has never been systematically examined due to the absence of high-resolution seafloor mapping data. Hence the geological processes that influence the distribution, character and timing of mass transport events and their associated hazards remain poorly understood. Here we develop a classification of the first-order shape of the continental shelf, slope and rise to examine potential relationships between form and process dominance. We found that the margin can be split into six geomorphic groups that vary smoothly from north to south between two basic end-members. The northernmost group (west of Chichagof Island, Alaska) is characterized by concave-upwards slope profiles, gentle slope gradients (<6°) and relatively low along-strike variance, all features characteristic of sediment-dominated siliciclastic margins. Dendritic submarine canyon/channel networks and retrogressive failure complexes along relatively gentle slope gradients are observed throughout the region, suggesting that high rates of Quaternary sediment delivery and accumulation played a fundamental part in mass transport processes. Individual failures range in area from 0.02 to 70 km2 and display scarp heights between 10 and 250 m. Transpression along the Queen Charlotte Fault increases southwards and the slope physiography is thus progressively more influenced by regional-scale tectonic deformation. The southernmost group (west of Haida Gwaii, British Columbia) defines the tectonically dominated end-member: the continental slope is characterized by steep gradients (>20°) along the flanks of broad, margin-parallel ridges and valleys. Mass transport features in the tectonically dominated areas are mostly observed along steep escarpments and the larger slides (up to 10 km2) appear to be failures of consolidated material along the flanks of tectonic features. Overall, these observations highlight the role of first-order margin physiography on the distribution and type of submarine landslides expected to occur in particular morphological settings. The sediment-dominated end-member allows for the accumulation of under-consolidated Quaternary sediments and shows larger, more frequent slides; the rugged physiography of the tectonically dominated end-member leads to sediment bypass and the collapse of uplifted tectonic features. The maximum and average dimensions of slides are an order of magnitude smaller than those of slides observed along other (passive) glaciated margins. We propose that the general patterns observed in slide distribution are caused by the interplay between tectonic activity (long- and short-term) and sediment delivery. The recurrence (<100 years) of M > 7 earthquakes along the Queen Charlotte Fault may generate small, but frequent, failures of under-consolidated Quaternary sediments within the sediment-dominated regions. By contrast, the tectonically dominated regions are characterized by the bypass of Quaternary sediments to the continental rise and the less frequent collapse of steep, uplifted and consolidated sediments.

Alaska↗

USGS2018

Seafloor fluid seeps on Kimki Ridge, offshore southern California: Links to active strike-slip faulting

The Kimki Ridge fluid seeps are located in western Catalina Basin about 60 km southwest of the southern California mainland and at a water depth of approximately 1100 m. Multichannel seismic reflection profiles collected by the U.S. Geological Survey (USGS) in 2014 show acoustic transparency within the Kimki Ridge, suggesting the possibility of fluid seeps and possible sub-seafloor fluid pathways. Subsequent multibeam bathymetric and backscatter intensity data collected during a cooperative University of Washington/USGS cruise in early 2016 show subtle seafloor buildups with high acoustic backscatter (reflectivity) in three places along Kimki Ridge, supporting the existence of fluid seepage. A Remotely Operated Vehicle (ROV) dive, conducted as part of the Nautilus Exploration Program, took place in August 2016 to confirm the presence of these previously unknown seeps and document their characteristics as well as those of any associated biological communities. Two of the three seeps were explored by ROV, and showed abundant evidence of fluid seepage, including characteristic algal mats, chemosynthetic clams, and authigenic carbonate formation. The seeps are comprised of carbonate buildups 1–3 m thick and 300–500 m across. Within these areas, we interpret broad crater-like depressions 30–50 m across and 1–2 m deep to be individual seep vents. The seep areas appear to be broad zones of diffuse seepage that support chemosynthetic biologic communities; however, active venting was not observed. Geochemical analyses of rock samples collected from the seeps indicate microbially driven anaerobic oxidation of methane at or near the sediment water interface. Seismic-reflection profiles show chimney-like fluid pathways along the limbs and in the axis of the fold forming Kimki Ridge, and evidence of methane in shallow sediments can be traced into the adjacent Catalina Basin. A system of closely spaced faults located at the axis of the Kimki Ridge anticline may serve as pathways to allow fluid flow to the seafloor. Our data are consistent with other studies that suggest that transpression is an important component in the formation and localization of fluid seeps in a strike-slip setting, implying that seep formation may be a common occurrence at fault stepovers or transpressional bends in strike-slip systems.

California↗