USGS Science⌕ Search

Geology topics

James C. Storey

Publications and source records attributed to James C. Storey.

26 records · Page 2Linked to original sources
USGS2004

Landsat-5 bumper-mode geometric correction

The Landsat-5 Thematic Mapper (TM) scan mirror was switched from its primary operating mode to a backup mode in early 2002 in order to overcome internal synchronization problems arising from long-term wear of the scan mirror mechanism. The backup bumper mode of operation removes the constraints on scan start and stop angles enforced in the primary scan angle monitor operating mode, requiring additional geometric calibration effort to monitor the active scan angles. It also eliminates scan timing telemetry used to correct the TM scan geometry. These differences require changes to the geometric correction algorithms used to process TM data. A mathematical model of the scan mirror's behavior when operating in bumper mode was developed. This model includes a set of key timing parameters that characterize the time-varying behavior of the scan mirror bumpers. To simplify the implementation of the bumper-mode model, the bumper timing parameters were recast in terms of the calibration and telemetry data items used to process normal TM imagery. The resulting geometric performance, evaluated over 18 months of bumper-mode operations, though slightly reduced from that achievable in the primary operating mode, is still within the Landsat specifications when the data are processed with the most up-to-date calibration parameters.

IEEE Transactions on Geoscience and Remote Sensing↗
USGS2004

Four years of Landsat-7 on-orbit geometric calibration and performance

Unlike its predecessors, Landsat-7 has undergone regular geometric and radiometric performance monitoring and calibration since launch in April 1999. This ongoing activity, which includes issuing quarterly updates to calibration parameters, has generated a wealth of geometric performance data over the four-year on-orbit period of operations. A suite of geometric characterization (measurement and evaluation procedures) and calibration (procedures to derive improved estimates of instrument parameters) methods are employed by the Landsat-7 Image Assessment System to maintain the geometric calibration and to track specific aspects of geometric performance. These include geodetic accuracy, band-to-band registration accuracy, and image-to-image registration accuracy. These characterization and calibration activities maintain image product geometric accuracy at a high level - by monitoring performance to determine when calibration is necessary, generating new calibration parameters, and verifying that new parameters achieve desired improvements in accuracy. Landsat-7 continues to meet and exceed all geometric accuracy requirements, although aging components have begun to affect performance.

IEEE Transactions on Geoscience and Remote Sensing↗
USGS2004

Landsat sensor performance: history and current status

The current Thematic Mapper (TM) class of Landsat sensors began with Landsat-4, which was launched in 1982. This series continued with the nearly identical sensor on Landsat-5, launched in 1984. The final sensor in the series was the Landsat-7 Enhanced Thematic Mapper Plus (ETM+), which was carried into orbit in 1999. Varying degrees of effort have been devoted to the characterization of these instruments and data over the past 22 years. Extensive short-lived efforts early in the history, very limited efforts in the middle years, and now a systematic program for continuing characterization of all three systems are apparent. Currently, both the Landsat-5 TM and the Landsat-7 ETM+ are operational and providing data. Despite 20+ years of operation, the TM on Landsat-5 is fully functional, although downlinks for the data are limited. Landsat-7 ETM+ experienced a failure of its Scan Line Corrector mechanism in May 2003. Although there are gaps in the data coverage, the data remain of equivalent quality to prefailure data. Data products have been developed to fill these gaps using other ETM+ scenes.

IEEE Transactions on Geoscience and Remote Sensing↗
USGS2004

Digital elevation extraction from multiple MTI data sets

The Digital Elevation Model (DEM) extraction process traditionally uses a stereo pair of aerial photographs that are sequentially captured using an airborne metric camera. Standard DEM extraction techniques have been naturally extended to utilize satellite imagery. However, the particular characteristics of satellite imaging can cause difficulties in the DEM extraction process. The ephemeris of the spacecraft during the collects, with respect to the ground test site, is the most important factor in the elevation extraction process. When the angle of separation between the stereo images is small, the extraction process typically produces measurements with low accuracy. A large angle of separation can cause an excessive number of erroneous points in the output DEM. There is also a possibility of having occluded areas in the images when drastic topographic variation is present, making it impossible to calculate elevation in the blind spots. The use of three or more images registered to the same ground area can potentially reduce these problems and improve the accuracy of the extracted DEM. The pointing capability of the Multispectral Thermal Imager (MTI) allows for multiple collects of the same area to be taken from different perspectives. This functionality of MTI makes it a good candidate for the implementation of DEM extraction using multiple images for improved accuracy. This paper describes a project to evaluate this capability and the algorithms used to extract DEMs from multi-look MTI imagery.

Conference Paper↗
USGS2002

Achieving sub-pixel geolocation accuracy in support of MODIS land science

The Moderate Resolution Imaging Spectroradiometer (MODIS) was launched in December 1999 on the polar orbiting Terra spacecraft and since February 2000 has been acquiring daily global data in 36 spectral bands—29 with 1 km, five with 500 m, and two with 250 m nadir pixel dimensions. The Terra satellite has on-board exterior orientation (position and attitude) measurement systems designed to enable geolocation of MODIS data to approximately 150 m (1 σ ) at nadir. A global network of ground control points is being used to determine biases and trends in the sensor orientation. Biases have been removed by updating models of the spacecraft and instrument orientation in the MODIS geolocation software several times since launch and have improved the MODIS geolocation to approximately 50 m (1 σ ) at nadir. This paper overviews the geolocation approach, summarizes the first year of geolocation analysis, and overviews future work. The approach allows an operational characterization of the MODIS geolocation errors and enables individual MODIS observations to be geolocated to the sub-pixel accuracies required for terrestrial global change applications.

Remote Sensing of Environment↗
USGS2001

Landsat 7 on-orbit modulation transfer function estimation

The Landsat 7 spacecraft and its Enhanced Thematic Mapper Plus (ETM+) were launched on April 15, 1999. Pre-launch modeling of the ETM+ optical system predicted that modulation transfer function (MTF) performance would change on-orbit. A method was developed to monitor the along-scan MTF performance of the ETM+ sensor system using on-orbit data of the Lake Pontchartrain Causeway in Louisiana. ETM+ image scan lines crossing the bridge were treated as multiple measurements of the target taken at varying sampling phases. These line measurements were interleaved to construct an over-sampled target profile for each ETM+ system transfer function. Model parameters were adjusted to achieve the best fit between the simulated profiles and the image measurements. The ETM+ modulation at the Nyquist frequency and the full width at half maximum of the point spread function were computed from the best-fit system transfer function model. Trending these parameters over time revealed apparent MTF performance degradation, observed mainly in the 15-meter resolution ETM+ panchromatic band. This confirmed the pre-launch model prediction that the panchromatic band was the most sensitive to changes in ETM+ optical performance.

Conference Paper↗
USGS2000

Landsat 7 on-orbit geometric calibration and performance

The Landsat 7 Image Assessment System was developed to characterize and calibrate the radiometric and geometric performance of the Landsat 7 Enhanced Thematic Mapper Pius (ETM+) instrument. Algorithms and software assess the geometric performance of the Landsat 7 spacecraft and ETM+ sensor system and perform geometric calibration by estimating sensor and spacecraft geometric parameters. Following the initial on-orbit calibration, performed during the Landsat 7 on- orbit initialization and verification period, all geometric performance goals were met. Geometric characterization and calibration activities will continue for the life of the Landsat 7 mission.

Conference Paper↗