USGS Science⌕ Search

Geology topics

J.W. Ball

Publications and source records attributed to J.W. Ball.

33 records · Page 2Linked to original sources
USGS1987

WATEQ4F - a personal computer Fortran translation of the geochemical model WATEQ2 with revised data base

A FORTRAN 77 version of the PL/1 computer program for the geochemical model WATEQ2, which computes major and trace element speciation and mineral saturation for natural waters has been developed. The code (WATEQ4F) has been adapted to execute on an IBM PC or compatible microcomputer. Two versions of the code are available, one operating with IBM Professional FORTRAN and an 8087 or 89287 numeric coprocessor, and one which operates without a numeric coprocessor using Microsoft FORTRAN 77. The calculation procedure is identical to WATEQ2, which has been installed on many mainframes and minicomputers. Limited data base revisions include the addition of the following ions: AlHS04(++), BaS04, CaHS04(++), FeHS04(++), NaF, SrC03, and SrHCO3(+). This report provides the reactions and references for the data base revisions, instructions for program operation, and an explanation of the input and output files. Attachments contain sample output from three water analyses used as test cases and the complete FORTRAN source listing. U.S. Geological Survey geochemical simulation program PHREEQE and mass balance program BALANCE also have been adapted to execute on an IBM PC or compatible microcomputer with a numeric coprocessor and the IBM Professional FORTRAN compiler.

Open-File Report↗
USGS1986

The geochemical behavior of aluminum in acidified surface waters

Speciation calculations for aluminum, in water samples taken from a drainage basin containing acid mine waters, demonstrate a distinct transition from conservative behavior for p H. below 4.6 to nonconservative behavior for p H. above 4.9. This transition corresponds to the pK for the first hydrolysis constant of the aqueous aluminum ion and appears to be a consistent phenomenon independent of field location, ionic strength, and sulfate concentration. Nonconservative behavior is closely correlated with the equilibrium solubility of a microcrystalline gibbsite or amorphous aluminum hydroxide.

Science↗
USGS1985

Major and trace-element analyses of acid mine waters in the Leviathan Mine drainage basin, California/Nevada; October, 1981 to October, 1982

Water issuing from the inactive Leviathan open-pit sulfur mine has caused serious degradation of the water quality in the Leviathan/Bryant Creek drainage basin which drains into the East Fork of the Carson River. As part of a pollution abatement project of the California Regional Water Quality Control Board, the U.S. Geological Survey collected hydrologic and water quality data for the basin during 1981-82. During this period a comprehensive sampling survey was completed to provide information on trace metal attenuation during downstream transport and to provide data for interpreting geochemical processes. This report presents the analytical results from this sampling survey. Sixty-seven water samples were filtered and preserved on-site at 45 locations and at 3 different times. Temperature, discharge, pH, and Eh and specific conductance were measured on-site. Concentrations of 37 major and trace constituents were determined later in the laboratory on preserved samples. The quality of the analyses was checked by using two or more techniques to determine the concentrations including d.c.-argon plasma emission spectrometry (DCP), flame and flameless atomic absorption spectrophotometry, UV-visible spectrophotometry, hydride-generation atomic absorption spectrophotometry and ion chromatography. Additional quality control was obtained by comparing measured to calculated conductance, comparing measured to calculated Eh (from Fe-2 +/Fe-3+ determinations), charge balance calculations and mass balance calculations for conservative constituents at confluence points. Leviathan acid mine waters contain mg/L concentrations of As, Cr, Co, Cu, Mn, Ni, T1, V and Zn, and hundreds to thousands of mg/L concentrations of Al, Fe, and sulfate at pH values as low as 1.8. Other elements including Ba, B, Be, Bi, Cd , Mo, Sb, Se and Te are elevated above normal background concentrations and fall in the microgram/L range. The chemical and 34 S/32 S isotopic analyses demonstrate that these acid waters are derived from pyrite oxidation and not from the oxidation of elemental sulfur.

California, Nevada↗
USGS1984

Specific-lon electrode determinations of sulfide preconcentrated from San Francisco Bay waters

Measurements of low-level dissolved-sulfide concentrations in estuarine water from San Francisco Bay have been made using the sulfide-specific electrode after preservation, separation, and preconcentration of the sulfide species. The separation and preconcentration were acheived by coprecipitation of ZnS with Zn(OH)2 followed by collection and dissolution of the precipitate, giving concentration factors up to 160-fold Preconcentration provided sulfide solutions that were adequately measurable within the practical working range of the specific-ion electrode The sulfide detection limit with the preconcentration step is 0 02 ??g/l Spike recoveries in the range of 81 to 10 1% have been achieved for laboratory-prepared samples having S2- concentrations as low as 0 6 ??g/l and 84 to 100% for an estuarine sample spiked in the field with 2 ??g/l (S(-II) Positive correlations have been found between dissolved S(-II) concentrations and concentrations of dissolved Cd, Cu, and Ni, negative correlations have been found between bisulfide (HS-) activity and activities of Cd2+, Cu2+, and Ag+ species ?? 1984 Springer-Verlag New York Inc.

Environmental Geology and Water Sciences↗
USGS1984

Partial compilation and revision of basic data in the WATEQ programs

Several portions of the basic data in the WATEQ series of computer programs (WATEQ, WATEQF, WATEQ2, WATEQ3, and PHREEQE) are compiled. The density and dielectric constant of water and their temperature dependence are evaluated for the purpose of updating the Debye-Huckel solvent parameters in the activity coefficient equations. The standard state thermodynamic properties of the Fe2+ and Fe3+ aqueous ions are refined. The main portion of this report is a comprehensive listing of aluminum hydrolysis constants, aluminum fluoride, aluminum sulfate, calcium chloride, magnesium chloride, potassium sulfate and sodium sulfate stability constants, solubility product constants for gibbsite and amorphous aluminum hydroxide, and the standard electrode potentials for Fe (s)/Fe2+(aq) and Fe2 +(aq)/Fe3+(aq). (USGS)

Water-Resources Investigations Report↗
USGS1983

Preliminary plasma spectrometric analyses for selected elements in some geothermal waters from Cerro Prieto, Mexico

As part of a cooperative study with Dr. Alfred Truesdell, water samples collected from geothermal power production wells at Cerro Prieto, Mexico, were analyzed for selected elements by d.c. argon plasma emission spectroscopy. Spectral interferences due to the presence of high concentrations of Ca, Si, Na and K in these water affected the apparent concentration values obtained. These effects were evaluated and correction techniques were developed and applied to the analytical values. Precipitates present in the samples at the time of analysis adversely affected the accuracy, precision and interpretability of the data. (USGS)

Water-Resources Investigations Report↗
USGS1978

Determination of dissolved boron in fresh, estuarine, and geothermal waters by d.c. argon-plasma emission spectrometry

A d.c. argon-plasma emission spectrometer is used to determine dissolved boron in natural (fresh and estuarine) water samples. Concentrations ranged from 0.02 to 250 mg l -1 . The emission—concentration function is linear from 0.02 to 1000 mg l -1 . Achievement of a relative standard deviation of ⩽ 3% requires frequent restandardization to offset sensitivity changes. Dilution may be necessary to overcome high and variable electron density caused by differences in alkali-metal content and to avoid quenching of the plasma by high solute concentrations of sodium and other easily ionized elements. The proposed method was tested against a reference method and found to be more sensitive, equally or more precise and accurate, less subject to interferences, with a wider linear analytical range than the carmine method. Analyses of standard reference samples yielded results in all cases within one standard deviation of the means.

Analytica Chimica Acta↗
USGS1971

Determination of silver in soils, sediments, and rocks by organic-chelate extraction and atomic absorption spectrophotometry

A useful method for the determination of silver in soil, sediment, and rock samples in geochemical exploration has been developed. The sample is digested with concentrated nitric acid, and the silver extracted with triisooctyl thiophosphate (TOTP) in methyl isobutyl ketone (MIBK) after dilution of the acid digest to approximately 6 M . The extraction of silver into the organic extractant is quantitative and not affected by the nitric acid concentration from 4 M to 8 M , or by different volumes of TOTP-MIBK. The extracted silver is stable and remains in the organic phase up to several days. The silver concentration is determined by atomic absorption spectrophotometry.

Analytica Chimica Acta↗
USGS1969

Determination of traces of silver in waters by anion exchange and atomic absorption spectrophotometry

A method has been developed for the accurate determination of 0.1–1 μg of silver per liter of water. The method permits stabilization of silver in water without loss to container walls. Optimum conditions have been established for the complete recovery of silver from water with an anion-exchange column, for quantitative elution of silver from the resin, and for measurement of silver by atomic absorption spectrophotometry after chelation with ammonium pyrrolidine dithiocarbamate and extraction of the chelate with MIBK. Silver in the 1–10 μg 1 "> μg1 range can be determined by extraction without pre-concentration on an ion-exchange resin.

Analytica Chimica Acta↗