USGS Science⌕ Search

Geology topics

J.H. Williams

Publications and source records attributed to J.H. Williams.

11 recordsLinked to original sources
USGS2016

A fractured rock geophysical toolbox method selection tool

Geophysical technologies have the potential to improve site characterization and monitoring in fractured rock, but the appropriate and effective application of geophysics at a particular site strongly depends on project goals (e.g., identifying discrete fractures) and site characteristics (e.g., lithology). No method works at every site or for every goal. New approaches are needed to identify a set of geophysical methods appropriate to specific project goals and site conditions while considering budget constraints. To this end, we present the Excel-based Fractured-Rock Geophysical Toolbox Method Selection Tool (FRGT-MST). We envision the FRGT-MST (1) equipping remediation professionals with a tool to understand what is likely to be realistic and cost-effective when contracting geophysical services, and (2) reducing applications of geophysics with unrealistic objectives or where methods are likely to fail.

Groundwater↗
USGS2005

Comparison of formation and fluid-column logs in a heterogeneous basalt aquifer

Deep observation boreholes in the vicinity of active production wells in Honolulu, Hawaii, exhibit the anomalous condition that fluid-column electrical conductivity logs and apparent profiles of pore-water electrical conductivity derived from induction conductivity logs are nearly identical if a formation factor of 12.5 is assumed. This condition is documented in three boreholes where fluid-column logs clearly indicate the presence of strong borehole flow induced by withdrawal from partially penetrating water-supply wells. This result appears to contradict the basic principles of conductivity-log interpretation. Flow conditions in one of these boreholes was investigated in detail by obtaining flow profiles under two water production conditions using the electromagnetic flowmeter. The flow-log interpretation demonstrates that the fluid-column log resembles the induction log because the amount of inflow to the borehole increases systematically upward through the transition zone between deeper salt water and shallower fresh water. This condition allows the properties of the fluid column to approximate the properties of water entering the borehole as soon as the upflow stream encounters that producing zone. Because this condition occurs in all three boreholes investigated, the similarity of induction and fluid-column logs is probably not a coincidence, and may relate to aquifer response under the influence of pumping from production wells.

Groundwater↗
USGS2005

Vertical cross contamination of trichloroethylene in a borehole in fractured sandstone

Boreholes drilled through contaminated zones in fractured rock create the potential for vertical movement of contaminated ground water between fractures. The usual assumption is that purging eliminates cross contamination; however, the results of a field study conducted in a trichloroethylene (TCE) plume in fractured sandstone with a mean matrix porosity of 13% demonstrates that matrix‐diffusion effects can be strong and persistent. A deep borehole was drilled to 110 m below ground surface (mbgs) near a shallow bedrock well containing high TCE concentrations. The borehole was cored continuously to collect closely spaced samples of rock for analysis of TCE concentrations. Geophysical logging and flowmetering were conducted in the open borehole, and a removable multilevel monitoring system was installed to provide hydraulic‐head and ground water samples from discrete fracture zones. The borehole was later reamed to complete a well screened from 89 to 100 mbgs; persistent TCE concentrations at this depth ranged from 2100 to 33,000 μg/L. Rock‐core analyses, combined with the other types of borehole information, show that nearly all of this deep contamination was due to the lingering effects of the downward flow of dissolved TCE from shallower depths during the few days of open‐hole conditions that existed prior to installation of the multilevel system. This study demonstrates that transfer of contaminant mass to the matrix by diffusion can cause severe cross contamination effects in sedimentary rocks, but these effects generally are not identified from information normally obtained in fractured‐rock investigations, resulting in potential misinterpretation of site conditions.

Ground Water↗
USGS2004

Acoustic and optical borehole-wall imaging for fractured-rock aquifer studies

Imaging with acoustic and optical televiewers results in continuous and oriented 360° views of the borehole wall from which the character, relation, and orientation of lithologic and structural planar features can be defined for studies of fractured-rock aquifers. Fractures are more clearly defined under a wider range of conditions on acoustic images than on optical images including dark-colored rocks, cloudy borehole water, and coated borehole walls. However, optical images allow for the direct viewing of the character of and relation between lithology, fractures, foliation, and bedding. The most powerful approach is the combined application of acoustic and optical imaging with integrated interpretation. Imaging of the borehole wall provides information useful for the collection and interpretation of flowmeterand other geophysical logs, core samples, and hydraulic and water-quality data from packer testing and monitoring.

Journal of Applied Geophysics↗
USGS2002

Using flowmeter pulse tests to define hydraulic connections in the subsurface: A fractured shale example

Cross-borehole flowmeter pulse tests define subsurface connections between discrete fractures using short stress periods to monitor the propagation of the pulse through the flow system. This technique is an improvement over other cross-borehole techniques because measurements can be made in open boreholes without packers or previous identification of water-producing intervals. The method is based on the concept of monitoring the propagation of pulses rather than steady flow through the fracture network. In this method, a hydraulic stress is applied to a borehole connected to a single, permeable fracture, and the distribution of flow induced by that stress monitored in adjacent boreholes. The transient flow responses are compared to type curves computed for several different types of fracture connections. The shape of the transient flow response indicates the type of fracture connection, and the fit of the data to the type curve yields an estimate of its transmissivity and storage coefficient. The flowmeter pulse test technique was applied in fractured shale at a volatile-organic contaminant plume in Watervliet, New York. Flowmeter and other geophysical logs were used to identify permeable fractures in eight boreholes in and near the contaminant plume using single-borehole flow measurements. Flowmeter cross-hole pulse tests were used to identify connections between fractures detected in the boreholes. The results indicated a permeable fracture network connecting many of the individual boreholes, and demonstrated the presence of an ambient upward hydraulic-head gradient throughout the site.

Journal of Hydrology↗
USGS2002

An integrated geophysical and hydraulic investigation to characterize a fractured-rock aquifer, Norwalk, Connecticut

The U.S. Geological Survey conducted an integrated geophysical and hydraulic investigation at the Norden Systems, Inc. site in Norwalk, Connecticut, where chlorinated solvents have contaminated a fractured-rock aquifer. Borehole, borehole-to-borehole, surface-geophysical, and hydraulic methods were used to characterize the site bedrock lithology and structure, fractures, and transmissive zone hydraulic properties. The geophysical and hydraulic methods included conventional logs, borehole imagery, borehole radar, flowmeter under ambient and stressed hydraulic conditions, and azimuthal square-array direct-current resistivity soundings. Integrated interpretation of geophysical logs at borehole and borehole-to-borehole scales indicates that the bedrock foliation strikes northwest and dips northeast, and strikes north-northeast to northeast and dips both southeast and northwest. Although steeply dipping fractures that cross-cut foliation are observed, most fractures are parallel or sub-parallel to foliation. Steeply dipping reflectors observed in the radar reflection data from three boreholes near the main building delineate a north-northeast trending feature interpreted as a fracture zone. Results of radar tomography conducted close to a suspected contaminant source area indicate that a zone of low electromagnetic (EM) velocity and high EM attenuation is present above 50 ft in depth - the region containing the highest density of fractures. Flowmeter logging was used to estimate hydraulic properties in the boreholes. Thirty-three transmissive fracture zones were identified in 11 of the boreholes. The vertical separation between transmissive zones typically is 10 to 20 ft. Open-hole and discrete-zone transmissivity was estimated from heat-pulse flowmeter data acquired under ambient and stressed conditions. The open-hole transmissivity ranges from 2 to 86 ft2/d. The estimated transmissivity of individual transmissive zones ranges from 0.4 to 68 ft2/d. Drawdown monitoring in nearby boreholes under pumping conditions identified hydraulic connections along a northeast-southwest trend between boreholes as far as 560 ft apart. The vertical distribution of fractures can be described by power law functions, which suggest that the fracture network contains transmissive zones consisting of closely spaced fractures surrounded by a less fractured and much less permeable rock mass.

Connecticut↗
USGS1996

Recharge of valley-fill aquifers in the glaciated northeast from upland runoff

Channeled and unchanneled runoff from till-covered bedrock uplands is a major source of recharge to valley-fill aquifers in the glaciated northeastern United States. Streamflow measurements and model simulation of average steady-state conditions indicate that upland runoff accounted for more recharge to two valley-fill aquifers in moderately high topographic-relief settings than did direct infiltration of precipitation. Recharge from upland runoff to a modeled valley-fill aquifer in an area of lower relief was significant but less than that from direct infiltration of precipitation. The amount of upland runoff available for recharging valley-fill aquifers in the glaciated Northeast ranges from about 1.5 to 2.5 cubic feet per second per square mile of drainage area that borders the aquifer. Stream losses from tributaries that drain the uplands commonly range from 0.3 to 1.5 cubic feet per second per 1,000 feet of wetted channel where the tributaries cross alluvial fans in the main valleys. Recharge of valley-fill aquifers from channeled runoff was estimated from measured losses and average runoff rates and was represented in aquifer models as specified fluxes or simulated by head-dependent fluxes with streamflow routing in the model cells that represent the tributary streams. Unchanneled upland runoff, which includes overland and subsurface flow, recharges the valley-fill aquifers at the contact between the aquifer and uplands near the base of the bordering till-covered hillslopes. Recharge from unchanneled runoff was estimated from average runoff rates and the hillslope area that borders the aquifer and was represented as specified fluxes to model-boundary cells along the valley walls.

ASTM Special Technical Publication↗
USGS1988

Simulation of ground-water flow in aquifers along the Susquehanna River in Columbia County, Pennsylvania

A numerical model of groundwater flow was developed for a 10.3 sq mi area along the Susquehanna River in Columbia County, east central Pennsylvania. Groundwater in the model area primarily is in secondary openings in the carbonate--and clastic-rock aquifers and primary openings in the glacial-outwash aquifer that discontinuously overlies bedrock. The groundwater flow model was calibrated under average steady-state conditions for 1981. The simulated 1981 water budget indicates an average inflow rate of 7.24 cu ft/sec. Of this, 93% is recharge from precipitation and 6.6% is boundary flow. 62% of the outflow is leakage to streams, 21% to pumpage, and 17% to evapotranspiration. The model was calibrated under transient conditions for December 22, 1980 through April 21, 1982. Water level fluctuations caused by natural stresses were more successfully simulated than those caused by pumping stresses. Three 10-year, hypothetical stress periods were simulated with the calibrated, transient model. The general impact of three pumping schemes under hypothetical drought and drought-recovery conditions were simulated. (USGS)

Pennyslvania↗
USGS1979

Fish remains from core 8, Clear Lake, Lake County, California

A 21.2-m-long core taken in the northwest part of the Upper Arm or main body of Clear Lake, California, has yielded a continuous record of fish life in this part of the lake during approximately the last 24,500 years. This record provides data concerning faunal changes in the Upper Arm, and also permits reconstruction of fish sizes and growth rates based upon scale remains. Four tables are presented that provide data on sample numbers and their frequency of occurrence and identification of skeletal and scale remains, and the reconstructed lengths and weights of Tule perch ( Hysterocarpus traski Gibbons) based upon remains of the scales of this species. A fifth table presents the mean reconstructed standard lengths and mean ages in years B.P. for slugs 1 through 24, 0-18.3 m. These data provide a unique data base for examination of paleoecologic and paleoclimatic trends in the North Coast Range of California through the Holocene and late Pleistocene. The record augments similar paleoecologic and paleoclimatic trends reconstructed from Core 6 and 7, taken in the Highlands and Oaks Arms of Clear Lake, respectively.

California↗