USGS ScienceSearch

Geology topics

J.C. Futrell

Publications and source records attributed to J.C. Futrell.

2 recordsLinked to original sources

Comparison of flume and towing methods for verifying the calibration of a suspended-sediment sampler

Suspended-sediment samplers must sample isokinetically (at stream velocity) in order to collect representative water samples of rivers. Each sampler solo by the Federal Interagency Sedimentation Project or by the U.S. Geological Survey Hydrologic Instrumentation Facility has been adjusted to sample isokinetically and tested in a flume to verify the calibration. The test program for a modified U.S. P-61 sampler provided an opportunity to compare flume and towing tank tests. Although the two tests yielded statistically distinct results, the difference between them was quite small. The conclusion is that verifying the calibration of any suspended-sediment sampler by either the flume or towing method should give acceptable results.

Water-Resources Investigations Report

Performance of ice meter and weight assemblies

The performance of three ice meters and weight assemblies used by the U.S. Geological Survey and Environment Canada were compared in a towing tank. Each meter was rated individually on a rod suspension and then rerated on a cable suspension, with the appropriate weight assembly. Vertical and veer cable angles were measured along with meter yaw angle. The effect of the weight assembly on the rod-suspension rating for each meter was illustrated by computing a correction coefficient which ranged between 0.88 and 1.10 depending on the weight system used and the fluid velocity. A sluch-n-all type weight assembly least affected the meter rating and was the most stable in all flow conditions. (USGS)

Water-Resources Investigations Report