USGS ScienceSearch

Geology topics

J. W. Lane

Publications and source records attributed to J. W. Lane.

4 recordsLinked to original sources

Time-domain electromagnetic soundings for the delineation of saline groundwater in the Genesee River Valley, Western New York, 2016-2017

The U.S. Geological Survey, in cooperation with the New York State Department of Environmental Conservation, is investigating the distribution of saline groundwater in the Genesee River Valley near the former Retsof salt mine (fig. 1). As part of this study, paired time-domain electromagnetic (TEM) soundings and horizontal-to-vertical spectral ratio (HVSR) seismic soundings were made at 39 locations during the fall of 2016 to determine the presence of saline groundwater and depth to the bedrock surface, respectively. All measurement sites were west of Geneseo, New York, on the Genesee River valley floor north and south of the sinkhole area that developed as a result of the roof collapse and flooding of the Retsof mine in 1994 (fig. 1). An integrated analysis of the TEM and HVSR soundings with borehole logs, coupled with groundwater-sample data from previous investigations, allowed the delineation of zones of high electrical conductivity associated with saline water in the lower part of the valley fill and underlying bedrock to depths greater than 1,000 feet (ft). This article describes the TEM sounding method and its application in the ongoing investigation, presents results of the TEM analysis at two of the sounding sites, and identifies proposed sites for additional TEM/HVSR sounding data collection during the fall of 2017. Supporting data for this study are available in a separate data release (Johnson and others, 2017).

New York

A fractured rock geophysical toolbox method selection tool

Geophysical technologies have the potential to improve site characterization and monitoring in fractured rock, but the appropriate and effective application of geophysics at a particular site strongly depends on project goals (e.g., identifying discrete fractures) and site characteristics (e.g., lithology). No method works at every site or for every goal. New approaches are needed to identify a set of geophysical methods appropriate to specific project goals and site conditions while considering budget constraints. To this end, we present the Excel-based Fractured-Rock Geophysical Toolbox Method Selection Tool (FRGT-MST). We envision the FRGT-MST (1) equipping remediation professionals with a tool to understand what is likely to be realistic and cost-effective when contracting geophysical services, and (2) reducing applications of geophysics with unrealistic objectives or where methods are likely to fail.

Groundwater

Detecting well casing leaks in Bangladesh using a salt spiking method

We apply fluid-replacement logging in arsenic-contaminated regions of Bangladesh using a low-cost, down-well fluid conductivity logging tool to detect leaks in the cased section of wells. The fluid-conductivity tool is designed for the developing world: it is lightweight and easily transportable, operable by one person, and can be built for minimal cost. The fluid-replacement test identifies leaking casing by comparison of fluid conductivity logs collected before and after spiking the wellbore with a sodium chloride tracer. Here, we present results of fluid-replacement logging tests from both leaking and non-leaking casing from wells in Araihazar and Munshiganj, Bangladesh, and demonstrate that the low-cost tool produces measurements comparable to those obtained with a standard geophysical logging tool. Finally, we suggest well testing procedures and approaches for preventing casing leaks in Bangladesh and other developing countries.

Ground Water

Radar attenuation tomography using the centroid frequency downshift method

A method for tomographically estimating electromagnetic (EM) wave attenuation based on analysis of centroid frequency downshift (CFDS) of impulse radar signals is described and applied to cross-hole radar data. The method is based on a constant- Q model, which assumes a linear frequency dependence of attenuation for EM wave propagation above the transition frequency. The method uses the CFDS to construct the projection function. In comparison with other methods for estimating attenuation, the CFDS method is relatively insensitive to the effects of geometric spreading, instrument response, and antenna coupling and radiation pattern, but requires the data to be broadband so that the frequency shift and variance can be easily measured. The method is well-suited for difference tomography experiments using electrically conductive tracers. The CFDS method was tested using cross-hole radar data collected at the U.S. Geological Survey Fractured Rock Research Site at Mirror Lake, New Hampshire (NH) during a saline-tracer injection experiment. The attenuation-difference tomogram created with the CFDS method outlines the spatial distribution of saline tracer within the tomography plane.

Journal of Applied Geophysics