Geology topics

Hugh H. Kieffer

Publications and source records attributed to Hugh H. Kieffer.

13 recordsLinked to original sources

USGS2023

Calibration and validation for the Surface Biology and Geology (SBG) mission concept: Recommendations for a multi-sensor system for imaging spectroscopy and thermal imagery

The primary objective of the National Aeronautics and Space Administration (NASA) Surface Biology and Geology (SBG) mission is to measure biological, physical, chemical, and mineralogical features of the Earth's surface, realizing a key conceptual component of the envisioned NASA Earth System Observatory (ESO). SBG is planned to launch as a two-platform mission in the late 2020s, the first of the ESO satellites. Targeted science and applications objectives based on observations of the Earth's SBG helped to define the mission architecture and instrument capabilities for the SBG mission concept. These objectives further drove the need for enabling change detection and trending of surface biological and geological features. These needs implied fundamental calibration goals to achieve the necessary science data quality characteristics. To meet those goals, calibration and validation pre-launch and on-orbit methods formed a basis of the calibration and validation concept, including the combined use of on-board references, vicarious techniques, and routine lunar imaging. International collaboration with space agencies in other countries, an important feature of the recommended SBG mission architecture, uncovered and emphasized the need for inter-calibration techniques that underscored the importance of collaborative instrument characterization data sharing and the use of common calibration references that are International System of Units (SI) traceable in pre-launch and post-launch on orbit calibration mission phases. International collaboration through the use of terrestrial and aquatic networks on six continents for vicarious calibration and validation activities will further assure necessary science data quality while in orbit.

JGR Biogeosciences↗

USGS2020

The Moon as a climate-quality radiometric calibration reference

On-orbit calibration requirements for a space-based climate observing system include long-term sensor response stability and reliable inter-calibration of multiple sensors, both contemporaneous and in succession. The difficulties with achieving these for reflected solar wavelength instruments are well known. The Moon can be considered a diffuse reflector of sunlight, and its exceptional photometric stability has enabled development of a lunar radiometric reference, manifest as a model that is queried for the specific conditions of Moon observations. The lunar irradiance model developed by the Robotic Lunar Observatory (ROLO) project has adequate precision for sensor response temporal trending, but a climate-quality lunar reference will require at least an order of magnitude improvement in absolute accuracy. To redevelop the lunar calibration reference with sub-percent uncertainty and SI traceability requires collecting new, high-accuracy Moon characterization measurements. This paper describes specifications for such measurements, along with a conceptual framework for reconstructing the lunar reference using them. Three currently active NASA-sponsored projects have objectives to acquire measurements that can support a climate-quality lunar reference: air-LUSI, dedicated lunar spectral irradiance measurements from the NASA ER-2 high altitude aircraft; ARCSTONE, dedicated lunar spectral reflectance measurements from a small satellite; and Moon viewing opportunities by CLARREO Pathfinder from the International Space Station.

Remote Sensing↗

USGS2015

Enumeration of Mars years and seasons since the beginning of telescopic exploration

A clarification for the enumeration of Mars Years prior to 1955 is presented, along with a table providing the Julian dates associated with Ls = 0° for Mars Years -183 (beginning of the telescopic study of Mars) to 100. A practical algorithm for computing Ls as a function of the Julian Date is provided. No new science results are presented

Icarus↗

USGS2006

CO2 jets formed by sublimation beneath translucent slab ice in Mars' seasonal south polar ice cap

The martian polar caps are among the most dynamic regions on Mars, growing substantially in winter as a significant fraction of the atmosphere freezes out in the form of CO2 ice. Unusual dark spots, fans and blotches form as the south-polar seasonal CO2 ice cap retreats during spring and summer. Small radial channel networks are often associated with the location of spots once the ice disappears. The spots have been proposed to be simply bare, defrosted ground; the formation of the channels has remained uncertain. Here we report infrared and visible observations that show that the spots and fans remain at CO2 ice temperatures well into summer, and must be granular materials that have been brought up to the surface of the ice, requiring a complex suite of processes to get them there. We propose that the seasonal ice cap forms an impermeable, translucent slab of CO2 ice that sublimates from the base, building up high-pressure gas beneath the slab. This gas levitates the ice, which eventually ruptures, producing high-velocity CO 2 vents that erupt sand-sized grains in jets to form the spots and erode the channels. These processes are unlike any observed on Earth.

Nature↗

USGS2005

Evidence for subsurface water ice in Korolev crater, Mars

Following the work of Kieffer and Titus (2001, Icarus 154, 162–180), we present results of thermal IR observations of Korolev crater, located at ∼ 73 ° "> ∼73° latitude in the martian northern polar region. Similar to techniques employed by Titus et al. (2003, Science 299, 1048–1050), we use infrared images from the Thermal Emission Imaging System (THEMIS) aboard Mars Odyssey to identify several regions within the crater basin with distinct thermal properties that correlate with topography. The THEMIS results show these regions exhibit temperature variations, spatially within the crater and throughout the martian year. In addition to the variations identified in the THEMIS observations, Mars Global Surveyor Thermal Emission Spectrometer (TES) observations show differences in albedo and temperature of these regions on both daily and seasonal cycles. Modeling annual temperature variations of the surface, we use TES observations to examine the thermal properties of these regions. This analysis reveals the crater interior deposits are likely thick layers (several meters) of high thermal inertia material (water ice, or extremely ice-rich regolith). Spatial variations of the physical properties of these regions are likely due to topography and possibly variations in the subsurface material itself. The nature of these deposits may help constrain polar processes, as well as provide context for the polar lander mission, Phoenix.

Icarus↗

USGS2005

Albedo of the south pole on Mars determined by topographic forcing of atmosphere dynamics

The nature of the martian south polar cap has remained enigmatic since the first spacecraft observations . In particular, the presence of a perennial carbon dioxide ice cap, the formation of a vast area of black ‘slab ice’ known as the Cryptic region and the asymmetric springtime retreat of the cap have eluded explanation. Here we present observations and climate modelling that indicate the south pole of Mars is characterized by two distinct regional climates that are the result of dynamical forcing by the largest southern impact basins, Argyre and Hellas. The style of surface frost deposition is controlled by these regional climates. In the cold and stormy conditions that exist poleward of 60° S and extend 180° in longitude west from the Mountains of Mitchel ( ∼ 30° W), surface frost accumulation is dominated by precipitation. In the opposite hemisphere, the polar atmosphere is relatively warm and clear and frost accumulation is dominated by direct vapour deposition. It is the differences in these deposition styles that determine the cap albedo.

Nature↗

USGS2003

Exposed water ice discovered near the south pole of Mars

The Mars Odyssey Thermal Emission Imaging System (THEMIS) has discovered water ice exposed near the edge of Mars' southern perennial polar cap. The surface H2O ice was first observed by THEMIS as a region that was cooler than expected for dry soil at that latitude during the summer season. Diurnal and seasonal temperature trends derived from Mars Global Surveyor Thermal Emission Spectrometer observations indicate that there is H2O ice at the surface. Viking observations, and the few other relevant THEMIS observations, indicate that surface H2O ice may be widespread around and under the perennial CO2 cap.

Science↗

USGS2001

TES mapping of Mars' north seasonal cap

The Mars Global Surveyor thermal emission spectrometer has made observations of Mars' north polar region for nearly a full martian year. Measurements of bolometric emission and reflectance, as well as brightness temperatures in specific bands synthesized from thermal radiance spectra, are used to track the behavior of surface and atmospheric temperatures, the distribution of condensed CO 2 and H 2 O, and the occurrence of dust storms. CO 2 grain size in the polar night is variable in space and time, and is influenced by atmospheric conditions. Some specific locations display concentration of H 2 O frost and indicate the presence of long-term water-ice near the surface. Annual budgets of solid CO 2 range up to 1500 kg m −2 ; preliminary analysis suggests significant transport of energy into latitudes near 70°N during the polar night.

Icarus↗

USGS2001

TES premapping data: Slab ice and snow flurries in the Martian north polar night

In the 1970s, Mariner and Viking spacecraft observations of the north polar region of Mars revealed polar brightness temperatures that were significantly below the expected kinetic temperatures for CO 2 sublimation. For the past few decades, the scientific community has speculated as to the nature of these Martian polar cold spots. Thermal Emission Spectrometer (TES) thermal spectral data have shown these cold spots to result largely from fine‐grained CO 2 and have constrained most of these cold spots to the surface (or near‐surface). Cold spot formation is strongly dependent on topography, forming preferentially near craters and on polar slopes. TES data, combined with Mars Orbiter Laser Altimeter (MOLA) cloud data, suggest atmospheric condensates form a small fraction of the observed cold spots. TES observations of spectra close to a blackbody indicate that another major component of the polar cap is slab CO 2 ice; these spectrally bland regions commonly have a low albedo. The cause is uncertain but may result from most of the light being reflected toward the specular direction, from the slab ice being intrinsically dark, or from it being transparent. Regions of the cap where the difference between the brightness temperatures at 18 μm ( T 18 ) and 25 μm ( T 25 ) is less than 5° are taken to indicate deposits of slab ice. Slab ice is the dominant component of the polar cap at latitudes outside of the polar night.

Journal of Geophysical Research E: Planets↗

USGS2000

Mars south polar spring and summer behavior observed by TES: seasonal cap evolution controlled by frost grain size

Thermal Emission Spectrometer (TES) observations of the recession phase of Mars' south polar cap are used to quantitatively map this recession in both thermal and visual appearance. Geographically nonuniform behavior interior to the cap is characterized by defining several small regions which exemplify the range of behavior. For most of the cap, while temperatures remain near the CO 2 frost point, albedos slowly increase with the seasonal rise of the Sun, then drop rapidly as frost patches disappear over a period of ∼20 days. A “Cryptic” region remains dark and mottled throughout its cold period. TES observations are compared with first-order theoretical spectra of solid CO 2 frost with admixtures of dust and H 2 O. The TES spectra indicate that the Cryptic region has much larger grained solid CO 2 than the rest of the cap and that the solid CO 2 here may be in the form of a slab. The Mountains of Mitchel remain cold and bright well after other areas at comparable latitude, apparently as a result of unusually small size of the CO 2 frost grains; we found little evidence for a significant presence of H 2 O. Although CO 2 grain size may be the major difference between these regions, incorporated dust is also required to match the observations; a self-cleaning process carries away the smaller dust grains. Comparisons with Viking observations indicate little difference in the seasonal cycle 12 Martian years later. The observed radiation balance indicates CO 2 sublimation budgets of up to 1250 kg m −2 . Regional atmospheric dust is common; localized dust clouds are seen near the edge of the cap prior to the onset of a regional dust storm and interior to the cap during the storm.

Journal of Geophysical Research E: Planets↗

USGS1999

Radiometric calibration of spacecraft using small lunar images

In this study, the data reduction steps that can be used to extract the lunar irradiance from low resolution images of the Moon are examined and the attendant uncertainties are quantitatively assessed. The response integrated over an image is compared to a lunar irradiance model being developed from terrestrial multi-band photometric observations over the 350-2500 nm range.

Conference Paper↗

USGS1996

Decomposition of AVIRIS spectra: Extraction of spectral reflectance, atmospheric, and instrumental components

Presents techniques that use only information contained within a raw, high-spectral-resolution, hyperspectral Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) scene to estimate and remove additive components (atmospheric scattering and instrument dark current). These techniques allow normalization of multiplicative components (instrument gain, topography, atmospheric transmission) and enhancement, extraction, and identification of relative-reflectance information related to surface composition and mineralogy. The authors' derivation of additive components from raw AVIRIS data is based on an adaptation of Crippen's "regression intersection method (RIM)." As does RIM, the authors use pairs of surface units that are spectrally homogeneous, spatially extensive, and located in rugged terrain. However, their technique utilizes the long-wavelength spectral data of AVIRIS to derive and remove atmospheric scattering components for each unit. AVIRIS data from the Kelso Dunes and Granite Mountain areas of southern California served as spectrally contrasting, topographically modulated surfaces for illustration of this technique. For a given site and wavelength pair, subtraction of the wavelength-dependent additive component from individual bands will remove topographic shading in both sites in band-to-band ratio images. Normalization of all spectra in the scene to the average scene spectrum results in cancellation of multiplicative components and produces a relative-reflectance scene. Absorption features due to mineral absorptions that depart from the average spectrum can be identified in the relative-reflectance AVIRIS product. The validity of these techniques is demonstrated by comparisons between relative-reflectance AVIRIS spectra derived from application of this technique and those derived by using the standard calibration techniques of JPL. Calibrated spectra were extracted from an AVIRIS scene of the Upheaval Dome area of Canyonlands National Park, UT. Results show that surface-reflectance information can be extracted and interpreted in terms of surface mineralogy after application of these techniques to AVIRIS data.

IEEE Transactions on Geoscience and Remote Sensing↗

USGS1981

Thermal inertia mapping of Mars from 60°S to 60°N

Twenty-micrometer brightness temperatures are used to derive the thermal inertia for 81% of the Martian surface between latitudes ±60°. These data were acquired by the two Viking Infrared Thermal Mappers in 1977 and 1978 following the two global dust storms of 1977. The spatial resolution used is 2° in latitude by 2° in longitude and the total range in derived inertia is . The distribution of thermal inertia is strongly bimodal with all values of thermal inertia less than being associated with three disjoint bright regions mostly in the northern hemisphere. Sufficient dust is raised in global storms to provide fine material adequate to produce these low-inertia areas but the specific deposition mechanism has not been defined. At the low resolution used, no complete exposures of clean rock were found. There is some tendency for darker material to be associated with higher thermal inertia, although the trend is far from one to one. The distribution of high- and low-inertia areas is sufficiently nonrandom to produce a variation in whole-disk brightness temperature with central meridian longitude. This variation and the change in surface kinetic temperature associated with dust storms are factors in establishing the whole-disk brightness temperature at radio and infrared wavelengths and will be important for those who use Mars as a calibration source.

Icarus↗