In 1955 exploration for base and precious metals was undertaken by Bear Creek Mining Company immediately north of the Main Tintic district , Utah . During the course of this work Bear Creek became interested in the East Tintic district , primarily as a result of the activities of the U.S. Geological Survey in that area . Data published on the East Tintic district by the Survey and others were studied and map data made available from various mining companies were compiled. Preliminary economic studies were made to determine the present day value of the type of ore body discovered previously in the district . Encouraging results from these investigations led to the selection of specific targets for exploration. Recommendations for a project program were made and approved. Negotiations were successfully concluded in mid-1956 for a unit lease agreement on lands in the East Tintic district owned by the Tintic Standard and Chief Consolidated mining companies and their subsidiaries. Of the targets selected for exploration, the Chief Oxide area seemed to be one of the most prominent. Our preliminary work in the Chief Oxide area corroborated the findings of the U.S. Geological Survey described in Part I of this paper. After careful consideration it was decided to gamble the cost of an exploration shaft in this area for the purpose of providing an underground drilling platform. We also hoped by means of underground workings to establish the existence and nature of the postulated fault. A limited amount of surface drilling was done prior to shaft sinking in order to locate a shaft site and also to obtain additional information of subvolcanic structure and alteration. Underground exploration in the Chief Oxide area was started in January, 1957. The Burgin shaft was sunk to a depth of 1,100 feet and by August, 1959, lateral development on the 1050 level totaled 4,721 feet and underground diamond drilling totaled 15,480 feet. Results of the work done to date are as follows: ( a ) Identification of the sedimentary rock section and an interpretation of the structure in the Burgin mine area . (b) Discovery by penetration of the previously postulated East Tintic thrust fault. (c) Discovery of large zones of manganese oxides and carbonates, which were found to be closely related to silver-lead-zinc mineralization. (d) Discovery of ore-grade lead-zinc mineralization within the footwall rocks of the East Tintic thrust. (e) Discovery of high-grade silver-lead ore within the thrust zone. Insofar as ore localization is concerned the most important structural feature in the Burgin mine area is the East Tintic thrust fault- a fact that opens up new ore potential over a large part of the East Tintic district not previously explored. Although the discoveries to date must be attributed essentially to the application of geology to exploration, the tools of geochemical prospecting and geophysics were also used, and the geochemical work, in particular, was found to be a definite aid in the selection of areas for further exploration.

Utah↗

USGS1960

The chief oxide-burgin area discoveries, East Tintic district, Utah; A case history

The Burgin shaft is in the Chief Oxide area of the E. Tintic district, Utah, and is about a mile E. of any previously known ore bodies; workings from it are currently developing a substantial amount of commercial Pb-Zn ore in several blind ore bodies that lie in folded Paleozoic carbonate rock concealed beneath a blanket of Eocene lava. This area was mapped by Tower and Smith of the U.S. Geological Survey in 1897 and again by Lindgren and Loughlin in 1911, but no detailed work was done until after 1943 when a field party headed by T.S. Lovering began a study of the entire E. Tintic district. The history of the development of exploration concepts is summarized under Historical Summary. The E. Tintic mining district is in the E.-central part of a N.-trending fault-block mountain range near the eastern margin of the Great Basin; dominant structures of the range are a N.-trending syncline on the W. and a less well exposed anticline on the E. Both folds are cut by an intersecting system of transcurrent strike-slip faults and by minor thrust faults and normal faults of moderate displacement. A strong W.-dipping thrust fault cuts the anticline a short distance E. of the fold axis, but is hidden by Eocene lava throughout the E. Tintic district. The pre-Tertiary rocks range from Lower Cambrian to Upper Mississippian and exceed 7,000 ft. in total thickness; they are dominantly marine limestone and dolomite except for a thick basal Cambrian quartzite. The Tertiary rocks are chiefly dacitic lavas and pyroclastic deposits that are intruded by moderately persistent dikes and irregular bodies of monzonite and quartz porphyry. Nearly all the faulting and folding took place before the extrusion of the lavas on a rugged Eocene erosion surface. At about the time of the intrusion of monzonitic magma, many of the faults in the Paleozoic rock were re-opened and in the overlying lava some fracturing took place which was later accented by hydrothermal alteration. Most of the ore mined in the E. Tintic district has come from Pb-Zn-Ag replacement bodies in shattered Jasperoidized hydrothermal dolomite at the intersection of low angle faults and steep mineralized NE.-trending cross fractures. The U.S. Geological Survey studies of 1943 to 1957 concentrated on detailed mapping of geology and alteration in the E. Tintic district, together with field and laboratory studies of the relation of alteration to stages of mineralization and ore deposition. Trenching and core drilling were carried on after World War II to aid in interpreting the subrhyolite geology, and the Chief Oxide area was 1 of 4 localities tested by drilling. Study of the fossils, lithology, and alteration shown here in a deep drill core, together with the knowledge of the regional geology, led to an essentially correct interpretation of subrhyolite structure in the strongly discordant underlying Paleozoic rocks in which a mineralized tear fault cuts a strong thrust fault, and to the conclusion that ore stage mineralization was present in substantial amounts in the Paleozoic rocks below the Chief Oxide alteration patch in the quartz latite lava. Subsequent geothermal and geochemical work strengthened this conclusion, and the recent development work of the Bear Creek Mining Company, which sank the Burgin shaft, has shown the presence of Pb-Zn-Ag ore of commercial grade in substantial amount in blind ore bodies below the lava blanket in the Chief Oxide area.

Utah↗

USGS1956

U.S. Geological Survey exploration program in the Trixie area, East Tintic mining district, Utah County, Utah

The Trixie area is in the south central part of the East Tintic mining district, Utah, and is believed to include the intersections of several mineralized pebble dike-fissure zones and a major, easterly trending fault. The fissure-fault intersections, which are considered to be favorable ore-locallizing structures, are concealed by lavas and tuffs several hundred feet thick that are strongly bleached and altered and which contain positive geochemical anomalies. During the summer months of 1954 and 1955 for the U. S. Geological Survey, under contract, 9 exploration holes were drilled in the Trixie area: 1) to investigate the relations of surface geochemical anomalies to possible concealed ore, 2) to determine the structure and stratigraphic units in the sedimentary rocks concealed beneath the lava, and 3) to further develop and refine geologic and geochemical techniques that may be useful in prospecting for concealed ore deposits in the East Tintic and other mining districts. This report briefly discusses the geology, hydrothermal alteration, and geochemical and geophysical anomalies in the Trixie area and presents the logs of the drill holes and tables of the copper, lead, zinc, and silver content, expressed in parts per million, of the drill cuttings and drill core.

Utah↗

USGS1952

Supergene and hydrothermal dispersion of heavy metals in wall rocks near ore bodies, Tintic district, Utah

Part I, T. S. Lovering. Preliminary work in the Tintic district , Utah , determined the relative distance of migration of ore metals in moist carbonate and silicic wall rocks near ore , and in ground water having a very sluggish circulation through mineralized ground. The analyses of efflorescences in the Tintic Standard mine openings at suitable localities indicated that under the conditions existing during the past 25 years lead has not moved perceptibly; gold has migrated only a few inches; copper has moved a few score feet at most and only in acid solutions; and zinc has traveled hundreds of feet, but not as far as some silver. Silver may travel far in the oxidized zone, but if it comes in contact with sulfides its migration is quickly halted. The chief chemical factors that influence the migration of metals in supergene solutions are the hydrogen ion concentration (pH) of hydrolysis of the metal ion, the solubility of sulfates of the metals , and the position of the metals in Schuermann's series if the solutions are in contact with sulfides for a considerable time.

Utah↗

USGS1951

Geochemical techniques as applied in recent investigations in the Tintic District, Utah

Field techniques for the rapid extraction and estimation of copper, lead, and zinc from altered rock are described, together with their application in the Tintic district , Utah . Either sulfuric acid or an acetic acid-ammonium acetate reagent is feasible as an extractant; but of these two, sulfuric acid is preferred. Data obtained by partial extraction methods show that zinc and lead are concentrated in altered extrusive rocks 350 to 500 feet above a horizontal, pipelike ore body in limestone, where the extrusive rocks are cut by a fracture zone related to a strong premineral cross fault. Such concentrations are absent in altered but unbrecciated igneous rocks above the continuation of the same ore body in an unfaulted area.

Utah↗