Geology topics
Publications and source records attributed to H. G. Wilshire.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
No abstract available.
Three different types of macroscopic fractures are recognized in upper-mantle and lower-crustal xenoliths in volcanic rocks from around the world: 1. (1) joints that are tensile fractures not occupied by crystallized magma products 2. (2) dikes that are tensile fractures occupied by mafic magmas crystallized to pyroxenites, gabbros or hydrous-mineral-rich rocks, 3. (3) faults that are unfilled shear fractures with surface markings indicative of shear displacement. In addition to intra-xenolith fractures, xenoliths commonly have polygonal or faceted shapes that represent fractures exploited during incorporation of the xenoliths into the host magma that brought them to the surface. The various types of fractures are considered to have formed in response to the pressures associated with magmatic fluids and to the ambient tectonic stress field. The presence of fracture sets and crosscutting relations indicate that both magma-filled and unfilled fractures can be contemporaneous and that the local stress field can change with time, leading to repeated episodes of fracture. These observations give insight into the nature of deep fracture processes and the importance of fluid-peridotite interactions in the mantle. We suggest that unfilled fractures were opened by volatile fluids exsolved from ascending magmas to the tops of growing dikes. These volatile fluids are important because they are of low viscosity and can rapidly transmit fluid pressure to dike and fault tips and because they lower the energy and tectonic stresses required to extend macroscopic cracks and to allow sliding on pre-existing fractures. Mantle seismicity at depths of 20-65 km beneath active volcanic centers in Hawaii corresponds to the depth interval where CO2-rich fluids are expected to be liberated from ascending basaltic magmas, suggesting that such fluids play an important role in facilitating earthquake instabilities in the presence of tectonic stresses. Other phenomena related to the fractures include permeation of peridotite by fluid inclusions derived by degassing of magmas, partial melting of peridotite and dike rocks, and metasomatic alteration of peridotite host rock by magmas emplaced in fractures. These effects of magmatism generally reduce the bulk density of peridotite and might also reduce seismic velocities. The velocity contrasts between fractured and unfractured peridotite might be detected by seismic-velocity profiling techniques.
Explore the source record for details and available documents.
(1) The effects of substrate disturbance on perennial plant succession in the Mojave Desert were assessed at three military camps abandoned for 40 years. (2) Soil compaction, removal of the top layer of soil, and alteration of drainage channel density caused significant changes in perennial plant cover, density, and relative species composition. (3) Long-lived species, predominantly Larrea tridentata , were dominant in all control areas but percentage cover and density were greatly reduced in areas where substrate alterations were significant. (4) Pioneer species such as Ambrosia dumosa and Hymenoclea salsola had percentage cover values similar to or greater than controls in most areas where substrate alterations were significant, and these species were dominant in the majority of disturbed areas. (5) Where substrate alterations were insignificant in disturbed areas at one camp, Larrea was the dominant species as in the control.
Explore the source record for details and available documents.
Refractory rocks with light REE/heavy REE ratios greater than chondrite are common as xenoliths in basalts and kimberlites and are found in some oceanic peridotite massifs. This has led to the supposition that large parts of the upper mantle have been metasomatically altered by addition of light REE and other hyperfusible constituents. Structural and major-element geochemical evidence from xenoliths and alpine peridotites, however, suggest that the metasomatic effects are local and are related to emplacement of partial melts. The melts are represented by dikes of pyroxenite, hydrous minerals, and gabbro that occur in mantle peridotites of all origins and were emplaced in them in the same sequence as indicated by crosscutting relations. REE distributions in both the peridotite and the dikes may be explained as a result of metasomatic interaction between dikes and peridotite wall rock in which the peridotite is enriched in light REE and the dikes depleted in light REE relative to the original liquid. Differentiation of the intrusions and separation of residual liquids may further reduce the light REE/heavy REE ratio in pyroxenite dikes; these residual liquids (hydrous mineral veins) enriched in light REE extend the volume of metasomatized peridotite as they too interact with their wall rocks. Differences in the relative abundances of altered peridotite (reacted wall rock) in xenoliths and massifs are seen as a sampling problem rather than a difference in process.
Explore the source record for details and available documents.
No abstract available.
No abstract available.
The map of the lunar region below lat 45 ˚ S. is the sixth part of a complete geolog ic recon naissance mapping of the moon at 1:5,000,000 scale. The upper half of the map portrays the geology of the earth-facing or near side, and the lower half shows terrain that was unknown before spacecr aft photography. The near side that was well photographed at resolutions of 0.1 to 0.5 km by Lunar Orbiter IV, but coverage of the far side is uneven quality (fig. 1). The geology of a small area near the south pole that was in shadow during the Orbiter missions can be partly inferred from the nature of adjacent units.
The impacts of off-road vehicles on vegetation and soil were investigated at seven representative sites in the San Francisco Bay area. Plant cover of grass and chaparral (with shrubs to 4 m tall) have been stripped by the two- and four-wheel vehicles in use. Impacts on loamy soils include increased surface strength (as much as 275 bars), increased bulk density (averaging 18%) to depths of 90 cm or more, reduction of soil moisture by an average 43% to 30 cm depths, greatly reduced infiltration, extension of the diurnal temperature range by as much as 12??C, and reduction of organic carbon by an average 33% in exposed soils. Very sandy soils respond similarly to vehicular use except that moisture is increased and surface strength of beach sand is decreased. These physical and chemical impacts reduce the land's capability of restoring its vegetative cover, which in turn adversely affects animal populations. Both the loss of plant cover and the physical changes caused by vehicles promote erosion. Measured soil and substrate losses from vehicular use zones range from 7 to 1180 kg/m2. The estimated erosion rate of the Chabot Park site exceeds the rate of erosion considered a serious problem by a factor 30, it exceeds United States Soil Conservation Service tolerance values by a factor of 46, and it exceeds average San Francisco Bay area erosion rates by a factor of 17. The resulting soil losses are effectively permanent. Neither the increased sediment yield nor the increased runoff is accomodated on the sites of use, and both are causing adverse effects to neighboring properties. ?? 1978 Springer-Verlag New York Inc.
Astronauts Cernan and Schmitt, of Apollo 17, landed in the Taurus-Littrow valley of the Moon on December 11, 1972. Their major objectives were: (1) to sample very ancient lunar material such as might be found in pre-Imbrian highlands as distant as possible from the Imbrium basin, and (2) to sample pyroclastic materials that had been interpreted as significantly younger than the mare basalts returned from previous Apollo landing sites. The crew worked approximately 22 hours on the lunar surface; they traversed about 30 km, collected nearly 120 kg of samples, took more than 2,200 photographs, and recorded many direct geologic observations. The lunar surface data, sample results, and geologic interpretation of orbital photographs are the bases for this geologic synthesis. The Taurus-Littrow massifs are interpreted as the upper part of thick faulted ejecta deposited on the rim of the transient cavity of the large southern Serenitatis basin, which was formed by a meteor impact about 3.9 to 4.0 b.y. ago. The target rocks, predominantly of the dunite-anorthosite-norite-troctolite suite or its metamorphosed equivalents, were fractured, sheared, crushed, and melted by the impact. The resulting mixture of crushed rock and melt was transported up and out of the transient cavity and deposited on and beyond its rim. Hot fragmental to partly molten ejecta and relatively cool cataclasite and relict target rocks were intermixed in a melange of lenses, pods, and veins. Crystallization of melts and thermal metamorphism of fine-grained fragmental debris produced breccia composed of lithic and mineral fragments in a fine-grained, coherent, crystalline matrix. Such breccia dominates the massif samples. Faults that bound the massifs were activated during formation of the basin, so that structural relief of several kilometers, due to high-angle faulting, was imposed on the ejecta almost as soon as it was deposited. Massive slumping, that produced thick wedges of colluvium on the lower massif slopes, probably occurred nearly contemporaneously with the faulting. Sculptured Hills material, perhaps largely cataclasite excavated from the southern Serenitatis basin by the same impact, was then deposited on and around the faulted ejecta of the massifs. Subfloor basalt, estimated to be about 1,400 m thick in the landing site, flooded the Taurus-Littrow graben prior to approximately 3.7 b. y. ago. The basalt is part of a more extensive unit that was broadly warped and cut by extensional faults before the accumulation in Mare Serenitatis of younger, less deformed basalts that overlap it. A thin volcanic ash unit, probably about 3.5 b. y. old, mantled the subfloor basalt and the nearby highlands. It, too, was subsequently overlapped by the younger basalts of Mare Serenitatis. In the time since deposition of the volcanic ash, continued bombardment by meteors and secondary projectiles has produced regolith, a mechanical mixture of debris derived mainly from the subfloor basalt, the volcanic ash, and the rocks of the nearby massifs and Sculptured Hills. The regolith, in combination with the underlying volcanic ash, forms an unconsolidated surficial deposit with an average thickness of about 14 m, sufficiently thick to permit abnormally rapid degradation of the smaller craters, especially those less than 200 m in diameter, so as to create a surface that seems less cratered than do other mare surfaces. Admixture of volcanic ash gives the surface a distinctive dark color, which, in combination with the less cratered appearance, led to the pre-mission interpretation of a young dark mantling unit. The uppermost part of the regolith in the landing area is basalt rich ejecta from the clustered craters of the valley floor. Most of the craters are interpreted as part of a secondary cluster formed by projectiles of ejecta from Tycho. When they struck the face of the South Massif, the projectiles mobilized fine-grained regolith material that was redeposited on the valley floor as the light mantle. Exposure ages suggest that the swarm of secondary projectiles struck the Taurus-Littrow area about 100 m.y. ago. The Lee-Lincoln fault scarp is part of an extensive system of wrinkle ridges and scarps that transect both mare and highlands rocks. The scarp cuts the crater Lara, but the major part of the displacement occurred before deposition of the light mantle. Minor post-light mantle displacement is shown by small extensional faults that cut its surface west of the Lee-Lincoln scarp.
Explore the source record for details and available documents.
Ultramafic xenoliths in basalts from the western United States are divided into Al-augite and Cr-diopside groups. The Al-augite group is characterized by Al, Ti-rich augites, comparatively Fe-rich olivine and orthopyroxene, and Al-rich spinel, the Cr-diopside group by Cr-rich clinopyroxene and spinel and by Mg-rich olivine and pyroxenes. Both groups have a wide range of subtypes, but the Al-augite group is dominated by augite-rich varieties, and the Cr-diopside group by olivine-rich lherzolites.
A glass-coated half-meter-size boulder was sampled by the Apollo 17 crew at station 8 near the foot of the Sculptured Hills. The rock proved to be a coarse-grained (0.5-cm) plagioclase-orthopyroxene cumulate, and the samples are the only true norites returned from the lunar surface. Photographs of the boulder showed it to contain at least nine structural surfaces and four glass veins. Orientation and inspection of three of the returned samples resulted in the identification of six surfaces and one vein. One of the structural surfaces visible in the boulder was identified as primary cumulus planar lamination, which was folded through an angle of at least 35° between two oriented samples, whereas fracture sets representing the other surfaces were coincident. The boulder is believed to be a sample of the deeper highlands or submare lunar crust, derived from a depth of 8 to 30 km and somewhat shock-metamorphosed during at least two excavation events. The chemical composition of the norites, when determined, should be of special interest in view of the large amount of literature concerning glass, cataclasite, hornfels, and "basalt" of noritic composition returned by other Apollo missions. However, the cumulus texture of the boulder precludes its being representative of any magmatic liquid composition, suggests that the lunar crust is heterogeneously layered, and that plagioclase sank, not floated, in magmatic liquids that formed the lunar crust. © 1975 Geological Society of America.
Lavalike materials that were emplaced in a fluid state occur in and around lunar impact craters whose diameters range from 3 km to more than 200 km and whose ages span a time interval of at least 3.5 b.y. Evidence of fluid emplacement includes flow lobes and leveed channels, a veneer mantling rough crater topography, level-surfaced pools, and complex contraction fissuring. The distribution of the lavalike deposits conforms to asymmetries of other ejecta from the same craters, and the material is concentrated downrange to distances as great as a crater radius. The character and distribution of the lavalike materials support the idea that they formed by impact melting rather than by volcanism. Returned samples indicate that materials with appropriate physical characteristics are generated by partial melting of feldspathic rocks by impact. The geologic evidence at lunar craters suggests that there is more melt rock in and near the craters than is predicted by experiment and theory.