USGS Science⌕ Search

Geology topics

Gregory P. Meeker

Publications and source records attributed to Gregory P. Meeker.

30 records · Page 2Linked to original sources
USGS2007

Characterization of flood sediments from Hurricanes Katrina and Rita and potential implications for human health and the environment

The flooding in the greater New Orleans, La., area that resulted from Hurricanes Katrina and Rita in August and September 2005 left behind accumulations of sediments up to many centimeters thick on streets, lawns, parking lots, and other flat surfaces (fig. 1). During the flood dewatering and subsequent cleanup, there were concerns that these sediments might contain pathogens and chemical contaminants that would pose a health risk to emergency responders, cleanup workers, and local residents who came into contact with the wet sediments or inhaled dusts generated from dried sediments. In response to these concerns, U.S. Geological Survey (USGS) scientists and colleagues characterized the potential environmental and health hazards of hurricane flood sediments from the greater New Orleans and Slidell, La., area.

Louisiana↗
USGS2007

Preliminary analytical results for ash and burned soils from the October 2007 southern California wildfires

The U.S. Geological Survey (USGS) collected ash and burned soils from about 28 sites in southern California wildfire areas (Harris, Witch, Ammo, Santiago, Canyon and Grass Valley) from Nov. 2 through 9, 2007 (table 1). USGS researchers are applying a wide variety of analytical methods to these samples, with the goal of helping identify characteristics of the ash and soils from wildland and suburban burned areas that may be of concern for their potential to adversely affect water quality, human health, endangered species, and debris-flow or flooding hazards. These studies are part of the Southern California Multi-Hazards Demonstration Project, and preliminary findings are presented here.

Open-File Report↗
USGS2006

USGS environmental characterization of flood sediments left in the New Orleans area after Hurricanes Katrina and Rita, 2005 — Progress Report

Introduction: The flooding in the greater New Orleans area that resulted from Hurricanes Katrina and Rita in September, 2005, left behind accumulations of sediments up to many centimeters thick on streets, lawns, parking lots, and other flat surfaces. These flood sediment deposits have been the focus of extensive study by the US Environmental Protection Agency (EPA) and Louisiana Department of Environmental Quality (LDEQ) due to concerns that the sediments may contain elevated levels of heavy metals, organic contaminants, and microbes. The U.S. Geological Survey (USGS) is characterizing a limited number of flood sediment samples that were collected on September 15-16 and October 6-7, 2005, from the greater New Orleans area by personnel from the USGS Louisiana Water Science Center in Baton Rouge. Small samples (< 3 pints each) of wet to dry flood sediment were collected from 11 localities around downtown New Orleans on September 15, 2005, and two large samples (40 pints each) of wet flood sediment were collected from the Chalmette area on September 16. Twelve additional samples (8-10 pints each) were collected from New Orleans, Slidell, Rigolets, and Violet on October 6 and 7. The USGS characterization studies of these flood sediments are designed to produce data and interpretations regarding how the sediments and any contained contaminants may respond to environmental processes. This information will be of use to cleanup managers and DoI/USGS scientists assessing environmental impacts of the hurricanes and subsequent cleanup activities.

Louisiana↗
USGS2005

Particle atlas of World Trade Center dust

The United States Environmental Protection Agency (EPA) has begun a reassessment of the presence of World Trade Center (WTC) dust in residences, public buildings, and office spaces in New York City, New York. Background dust samples collected from residences, public buildings, and office spaces will be analyzed by multiple laboratories for the presence of WTC dust. Other laboratories are currently studying WTC dust for other purposes, such as health effects studies. To assist in inter-laboratory consistency for identification of WTC dust components, this particle atlas of phases in WTC dust has been compiled.

Open-File Report↗
USGS2005

Characterization and modes of occurrence of elements in feed coal and coal combustion products from a power plant utilizing low-sulfur coal from the Powder River Basin, Wyoming

The U.S. Geological Survey and the University of Kentucky Center for Applied Energy Research are collaborating with an Indiana utility company to determine the physical and chemical properties of feed coal and coal combustion products from a coal-fired power plant. The Indiana power plant utilizes a low-sulfur (0.23 to 0.47 weight percent S) and lowash (4.9 to 6.3 weight percent ash) subbituminous coal from the Wyodak-Anderson coal zone in the Tongue River Member of the Paleocene Fort Union Formation, Powder River Basin, Wyoming. Based on scanning electron microscope and X-ray diffraction analyses of feed coal samples, two mineral suites were identified: (1) a primary or detrital suite consisting of quartz (including beta-form grains), biotite, feldspar, and minor zircon; and (2) a secondary authigenic mineral suite containing alumino-phosphates (crandallite and gorceixite), kaolinite, carbonates (calcite and dolomite), quartz, anatase, barite, and pyrite. The primary mineral suite is interpreted, in part, to be of volcanic origin, whereas the authigenic mineral suite is interpreted, in part, to be the result of the alteration of the volcanic minerals. The mineral suites have contributed to the higher amounts of barium, calcium, magnesium, phosphorus, sodium, strontium, and titanium in the Powder River Basin feed coals in comparison to eastern coals. X-ray diffraction analysis indicates that (1) fly ash is mostly aluminate glass, perovskite, lime, gehlenite, quartz, and phosphates with minor amounts of periclase, anhydrite, hematite, and spinel group minerals; and (2) bottom ash is predominantly quartz, plagioclase (albite and anorthite), pyroxene (augite and fassaite), rhodonite, and akermanite, and spinel group minerals. Microprobe and scanning electron microscope analyses of fly ash samples revealed quartz, zircon, and monazite, euhedral laths of corundum with merrillite, hematite, dendritic spinels/ferrites, wollastonite, and periclase. The abundant calcium and magnesium mineral phases in the fly ash are attributed to the presence of carbonate, clay, and phosphate minerals in the feed coal and their alteration to new phases during combustion. The amorphous diffraction-scattering maxima or glass 'hump' appears to reflect differences in chemical composition of fly ash and bottom ash glasses. In Wyodak-Anderson fly and bottom ashes, the center point of scattering maxima is due to calcium and magnesium content, whereas the glass 'hump' of eastern fly ash reflects variation in aluminum content. The calcium- and magnesium-rich and alumino-phosphate mineral phases in the coal combustion products can be attributed to volcanic minerals deposited in peat-forming mires. Dissolution and alteration of these detrital volcanic minerals occurred either in the peat-forming stage or during coalification and diagenesis, resulting in the authigenic mineral suite. The presence of free lime (CaO) in fly ash produced from Wyodak-Anderson coal acts as a self-contained 'scrubber' for SO3, where CaO + SO3 form anhydrite either during combustion or in the upper parts of the boiler. Considering the high lime content in the fly ash and the resulting hydration reactions after its contact with water, there is little evidence that major amounts of leachable metals are mobilized in the disposal or utilization of this fly ash.

Scientific Investigations Report↗
USGS2004

Chapter 8 Petrogenesis and mineralogic residence of selected elements in the meade peak phosphatic shale member of the permian phosphoria formation, Southeast Idaho

The Meade Peak Phosphatic Shale Member of the Permian Phosphoria Formation hosts the ore mined by the phosphate industry of southeast Idaho. It also hosts environmentally sensitive elements (ESE) such as Se, As, Hg, Ni, Cd, Zn, and Cr. Primary chemistry, elemental distribution patterns, and mineralogy within the Meade Peak were modified by element migration and possibly the introduction of elements. Fluids moved within the Meade Peak throughout its history, although the passage of fluids was highly variable in space and time, resulting in small domains of different rock chemistry and different mineralogy. Timing of major events affecting the Meade Peak and mineral habit are used to differentiate among detrital, diagenetic, epigenetic, and supergene mineral assemblages. Cross-cutting relationships among minerals are too rare to provide much paragenetic infor- mation. Carbonate fluorapatite (CFA) occurs in several forms, but dominantly as pelloids, some of which may have formed in situ during diagenesis. The other volumetrically signifi- cant form of CFA is interstitial cement that formed during diagenesis. Beginning during diagenesis and continuing intermittently, multiple generations of carbonate (dolomite and calcite) formed overgrowths and texturally complex carbonate cements. Movement and precipitation of silica followed a similar pattern. The ammonium feldspar buddingtonite, which generally rims orthoclase, also formed during diagenesis. Bacteria apparently played a significant role during diagenesis as well as during supergene processes, resulting in extreme fractionation of S isotopes and the possible bacterially mediated formation of minerals such as glauconite and sphalerite. Catagenesis, apparently culminating in oil generation, was the last significant diagenetic change. Thrusting accompanied by fluid (oil and brine) migration began during catagenesis in the Late Jurassic or Cretaceous and continued into the early Eocene. Fluorite ± carbonate ± barite± bitumen veins formed as a result of brittle deformation and accompanying fluid movement. This fracturing event may have been associated with a period of extension and normal faulting (Neogene to Holocene). Passage of the Yellowstone hot spot to the north of the area during the Neogene is marked by silicic domes and basaltic flows. The enrichment of Hg in fracture coatings might be the result of deposition from warm fluids associated with the emplacement of the silicic domes or a generally elevated, regional thermal gradient associated with the volcanism. Many of the fracture systems are still open and continue to provide fluid pathways that are the primary depositional sites for a wide variety of supergene minerals (such as Se, efflorescent salts) and element associations (such as Hg, Cd-S, Fe-Cr-O) in which many of the ESE are concentrated. Native Se is the most commonly identified host of Se in the studied samples. The largest concentration of Se occurs in open-fracture systems that cross-cut waste rock and ore units. The age(s) of native Se formation is not known; how- ever, the latest period of Se mobility is the present. Direct measurement of efflorescent “salts” forming on new mine faces indicate that several ESE, including both Se and Zn, are concentrated on the faces soon after they are exposed. Zinc is present as hydrous sulfates, but the residence of Se in these “salts” is unknown.

Idaho↗
USGS2004

Preliminary report on using imaging spectroscopy to map ultramafic rocks, serpentinites, and tremolite-actinolite-bearing rocks in California

Airborne Visible/InfraRed Imaging Spectrometer (AVIRIS) data were collected in approximately 3- kilometer-wide swaths over selected areas in El Dorado and Plumas Counties that contain serpentinite and ultramafic rocks as part of an experiment to determine if potentially asbestos-bearing rocks could be identified spectrally. M ineral maps created from the AVIRIS data were used successfully to delineate exposures of serpentine and tremolite-actinolite/talc in areas with up to 70 percent vegetation cover in some cases. In other cases, the density of vegetation is so high that it prevented spectral identification by AVIRIS of minerals in those areas, thus there may be more serpentine and tremolite-actinolite/talc present than is shown on the mineral maps. It also is important to note that not all tremolite-actinolite is fibrous, and just because tremolite-actinolite was mapped, does not necessarily mean it is tremolite- or actinolite-asbestos. Finally, it is difficult to spectrally distinguish tremolite-actinolite from talc using AVIRIS. Serpentine has been detected outside of known serpentinite outcrop areas, mostly as aggregate that covers dirt roads. Four flight lines of AVIRIS data were analyzed over areas selected to show trends in degree of surface exposure as a function of elevation and vegetation cover. Field checking has verified the accuracy of the mineral maps at 25 accessible locations. Eleven additional flight lines remain to be analyzed and field checked pending future funding. AVIRIS mineral mapping has shown promise as a complement to field mapping but cannot replace it. Because AVIRIS is a remote-sensing technology, the presence of serpentine or tremolite-actinolite would have to be verified in the field by direct observation and by appropriate sampling and laboratory analysis, if needed. At this time, no conclusions regarding the presence or absence of asbestos minerals in the identified areas are possible from the AVIRIS data alone. Identification of asbestos minerals in the identified areas would require appropriate sampling and laboratory analysis of the materials in those areas.

California↗
USGS2002

Reconnaissance study of the geology of U.S. vermiculite deposits: Are asbestos minerals common constituents?

Unusually high incidences of asbestos-related mortality and respiratory disease in the small town of Libby, Montana, have been linked to amphibole mineral fibers intergrown with the vermiculite deposits mined and milled near the town from 1923 to 1990. A study conducted by the U.S. Agency for Toxic Substances and Disease Registry concluded that mortality due to asbestosis in Libby mine and mill workers and residents during 1979 to 1998 was much higher than expected for a similar Montana or United States population group. Recent medical testing of past and present mineworkers and residents of Libby showed lung abnormalities in nearly one-fifth of the adult study participants. The U.S. Environmental Protection Agency, under Superfund authority, is completing sampling and cleanup of asbestos-bearing materials in the mine, mill, and town sites. The U.S. Geological Survey is conducting a study, reviewed herein, to investigate the mineral content of other U.S. vermiculite deposits and to determine if the amphibole asbestos minerals like those found in the Libby deposits are common in other vermiculite deposits.

Montana↗
USGS2002

Whole-rock and glass major-element geochemistry of Kilauea Volcano, Hawaii, near-vent eruptive products: September 1994 through September 2001

This report presents major-element geochemical data for glasses and whole-rock aliquots among 523 lava samples collected near the vent on Kilauea's east rift zone between September 1994 and October 2001. Information on sample collection, analysis techniques and analytical standard reproducibility are presented as a PDF file, which also includes a detailed explantion of the categories of sample information presented in the database spreadsheet. The sample database is downloadable as a separate Microsoft Excel file.

Hawai'i↗