USGS Science⌕ Search

Geology topics

George A. Desborough

Publications and source records attributed to George A. Desborough.

At least 19 recordsLinked to original sources
USGS2010

Mineralogical and chemical characteristics of some natural jarosites

This paper presents a detailed study of the mineralogical, microscopic, thermal, and spectral characteristics of jarosite and natrojarosite minerals. Systematic mineralogic and chemical examination of a suite of 32 natural stoichiometric jarosite and natrojarosite samples from diverse supergene and hydrothermal environments indicates that there is only limited solid solution between Na and K at low temperatures, which suggests the presence of a solvus in the jarosite-natrojarosite system at temperatures below about 140 C. The samples examined in this study consist of either end members or coexisting end-member pairs of jarosite and natrojarosite. Quantitative electron-probe microanalysis data for several natural hydrothermal samples show only end-member compositions for individual grains or zones, and no detectable alkali-site deficiencies, which indicates that there is no hydronium substitution within the analytical uncertainty of the method. In addition, there is no evidence of Fe deficiencies in the natural hydrothermal samples. Hydronium-bearing jarosite was detected in only one relatively young supergene sample suggesting that terrestrial hydronium-bearing jarosites generally are unstable over geologic timescales. Unit-cell parameters of the 20 natural stoichiometric jarosites and 12 natural stoichiometric natrojarosites examined in this study have distinct and narrow ranges in the a- and c-cell dimensions. There is no overlap of these parameters at the 1r level for the two end-member compositions. Several hydrothermal samples consist of fine-scale (2–10 lm) intimate intergrowths of jarosite and natrojarosite, which could have resulted from solid-state diffusion segregation or growth zoning due to variations in the Na/K activity ratio of hydrothermal solutions.

Geochimica et Cosmochimica Acta↗
USGS2006

The use of synthetic jarosite as an analog for natural jarosite

The presence of jarosite in soil or mining waste is an indicator of acidic sulfate-rich conditions. Physical and chemical properties of synthetic jarosites are commonly used as analogs in laboratory studies to determine solubility and acid-generation of naturally occurring jarosites. In our work we have mineralogically and chemically characterized both natural and synthetic jarosites. Analysis of 32 natural hydrothermal and supergene K- and Na-jarosites indicates no (< 5 mole %) solid solution between K and Na end members. Instead, our detailed study of cell dimensions and composition reveals discrete mixtures of K and Na end members. Hydronium-bearing jarosite was detected in only one natural sample, and it appears that hydronium-bearing jarosites are metastable. Although the presence of hydronium in jarosite cannot be directly measured, we found that when synthetic hydronium-bearing jarosites are heated at 120°C for 78 days or 240°C for 24 hours, Fe(OH)SO4 is formed. The Fe(OH)SO4 is easily detected by X-ray diffraction and, hence, can be used as a post-mortem indicator of the presence of hydronium jarosite. Results from our synthetic jarosite studies indicate that natural metastable hydronium-bearing jarosite or iron-deficient forms of natural jarosite likely play an important role in acid generation in some mining wastes, but are not accurately represented by synthetic jarosite prepared by commonly used methods. The widespread practice of heating to at least 110°C after jarosite synthesis appears to drive off structural waters from protonated hydroxyl sites, which changes the properties of the jarosite. Therefore, synthetic jarosite should not be heated above 95 oC if it is to be used as an analog for low-temperature natural jarosite in mining wastes.

Conference Paper↗
USGS2004

Chapter 8 Petrogenesis and mineralogic residence of selected elements in the meade peak phosphatic shale member of the permian phosphoria formation, Southeast Idaho

The Meade Peak Phosphatic Shale Member of the Permian Phosphoria Formation hosts the ore mined by the phosphate industry of southeast Idaho. It also hosts environmentally sensitive elements (ESE) such as Se, As, Hg, Ni, Cd, Zn, and Cr. Primary chemistry, elemental distribution patterns, and mineralogy within the Meade Peak were modified by element migration and possibly the introduction of elements. Fluids moved within the Meade Peak throughout its history, although the passage of fluids was highly variable in space and time, resulting in small domains of different rock chemistry and different mineralogy. Timing of major events affecting the Meade Peak and mineral habit are used to differentiate among detrital, diagenetic, epigenetic, and supergene mineral assemblages. Cross-cutting relationships among minerals are too rare to provide much paragenetic infor- mation. Carbonate fluorapatite (CFA) occurs in several forms, but dominantly as pelloids, some of which may have formed in situ during diagenesis. The other volumetrically signifi- cant form of CFA is interstitial cement that formed during diagenesis. Beginning during diagenesis and continuing intermittently, multiple generations of carbonate (dolomite and calcite) formed overgrowths and texturally complex carbonate cements. Movement and precipitation of silica followed a similar pattern. The ammonium feldspar buddingtonite, which generally rims orthoclase, also formed during diagenesis. Bacteria apparently played a significant role during diagenesis as well as during supergene processes, resulting in extreme fractionation of S isotopes and the possible bacterially mediated formation of minerals such as glauconite and sphalerite. Catagenesis, apparently culminating in oil generation, was the last significant diagenetic change. Thrusting accompanied by fluid (oil and brine) migration began during catagenesis in the Late Jurassic or Cretaceous and continued into the early Eocene. Fluorite ± carbonate ± barite± bitumen veins formed as a result of brittle deformation and accompanying fluid movement. This fracturing event may have been associated with a period of extension and normal faulting (Neogene to Holocene). Passage of the Yellowstone hot spot to the north of the area during the Neogene is marked by silicic domes and basaltic flows. The enrichment of Hg in fracture coatings might be the result of deposition from warm fluids associated with the emplacement of the silicic domes or a generally elevated, regional thermal gradient associated with the volcanism. Many of the fracture systems are still open and continue to provide fluid pathways that are the primary depositional sites for a wide variety of supergene minerals (such as Se, efflorescent salts) and element associations (such as Hg, Cd-S, Fe-Cr-O) in which many of the ESE are concentrated. Native Se is the most commonly identified host of Se in the studied samples. The largest concentration of Se occurs in open-fracture systems that cross-cut waste rock and ore units. The age(s) of native Se formation is not known; how- ever, the latest period of Se mobility is the present. Direct measurement of efflorescent “salts” forming on new mine faces indicate that several ESE, including both Se and Zn, are concentrated on the faces soon after they are exposed. Zinc is present as hydrous sulfates, but the residence of Se in these “salts” is unknown.

Idaho↗
USGS2000

Analytical results for total-digestions, EPA-1312 leach, and net acid production for twenty-three abandoned metal-mining related wastes in the Boulder River watershed, northern Jefferson County, Montana

Introduction Metal-mining related wastes in the Boulder River basin study area in northern Jefferson County, Montana, have been implicated in their detrimental effects on water quality with regard to acid generation and toxic-metal solubilization during snow melt and storm water runoff events. This degradation of water quality is defined chiefly by the “Class 1 Aquatic Life Standards” that give limits for certain dissolved metal concentrations according to water alkalinity. Veins enriched in base- and precious metals were explored and mined in the Basin, Cataract Creek, and High Ore Creek drainages over a period of more than 70 years. Extracted minerals included galena, sphalerite, pyrite, chalcopyrite, tetrahedrite and arsenopyrite. Most of the metal-mining wastes in the study area were identified and described by the Montana Bureau of Mines and Geology. In 1997, the U.S. Geological Survey collected 20 composite samples of mine-dump or tailings waste from ten sites in the Basin and Cataract Creek drainages, and two samples from one site in the High Ore Creek drainage. Desborough and Fey presented data concerning acid generation potential, mineralogy, concentrations of certain metals by energy-dispersive X-ray fluorescence (EDXRF), and trace-element leachability of mine and exploration wastes from the ten sites of the Basin and Cataract Creek drainages. The present report presents total-digestion major- and trace-element analyses, net acid production (NAP), and results from the EPA-1312 synthetic precipitation leach procedure (SPLP) performed on the same composite samples from the ten sites from the Basin and Cataract Creek drainages, and two composite samples from the site in the High Ore Creek drainage.

Montana↗
USGS2000

Update and revisions for Open-File Report 98-624, synthetic precipitation leaching procedure (SPLP) leachate chemistry data for solid mine-waste composite samples from the Silverton and Leadville districts in Colorado

This report supersedes, revises, and updates information and data previously released in Open-File Report 98-624 (Montour and others, 1998). Data for this report were derived from leaching of mine-waste composite samples using a modification of E.P. A. Method 1312, Synthetic Precipitation Leaching Procedure (SPLP). In 1997, members of the U.S. Geological Survey Mine Waste Characterization Project collected four mine-waste composite samples from mining districts near Silverton, Colorado (MAY and YUK), and near Leadville, Colorado (VEN and SUN). This report presents analytical results from these sites.

Open-File Report↗
USGS2000

Synthetic Precipitation Leaching Procedure (SPLP) leachate chemistry data for solid mine-waste composite samples from southwestern New Mexico, and Leadville, Colorado

This report details chemistry data derived from leaching of mine-waste composite samples using a modification of E.P.A. Method 1312, Synthetic Precipitation Leaching Procedure (SPLP). In 1998, members of the U.S. Geological Survey Mine Waste Characterization Project collected four mine-waste composite samples from mining districts in southwestern New Mexico (CAR and PET) and near Leadville, Colorado (TUC and MII). Resulting leachate pH values for the four composites ranged from 5.45 to 8.84 and ranked in the following order: CAR < TUC < MII < PET. Specific conductivity values ranged from 85 uS/cm to 847 uS/cm in the following order: PET < MII < CAR < TUC. Geochemical data generated from this investigation reveal that leachate from the CAR composite contains the highest concentrations of Pb, Zn, Ni, Mn, Cu, Cd, and Al

Open-File Report↗
USGS1992

Geology and mineral paragenesis of the Pea Ridge iron ore mine, Washington County, Missouri: Origin of the rare-earth-element- and gold-bearing breccia pipes. Some mineralogical and geochemical aspects of middle and upper Pennsylvanian marine black shales in part of the midcontinent region. Mineralogical and geochemical analysis of the metal- and organic-rich Grassy Creek Shale of the New Albany group (Upper Devonian and Lower Mississippian) in Hardin County, southern Illinois

No abstract available.

Illinois, Iowa, Kansas, Missouri, Nebraska, Oklaho↗