USGS Science⌕ Search

Geology topics

G.R. Robinson

Publications and source records attributed to G.R. Robinson.

At least 19 recordsLinked to original sources
USGS2007

Probabilistic prediction models for aggregate quarry siting

Weights-of-evidence (WofE) and logistic regression techniques were used in a GIS framework to predict the spatial likelihood (prospectivity) of crushed-stone aggregate quarry development. The joint conditional probability models, based on geology, transportation network, and population density variables, were defined using quarry location and time of development data for the New England States, North Carolina, and South Carolina, USA. The Quarry Operation models describe the distribution of active aggregate quarries, independent of the date of opening. The New Quarry models describe the distribution of aggregate quarries when they open. Because of the small number of new quarries developed in the study areas during the last decade, independent New Quarry models have low parameter estimate reliability. The performance of parameter estimates derived for Quarry Operation models, defined by a larger number of active quarries in the study areas, were tested and evaluated to predict the spatial likelihood of new quarry development. Population density conditions at the time of new quarry development were used to modify the population density variable in the Quarry Operation models to apply to new quarry development sites. The Quarry Operation parameters derived for the New England study area, Carolina study area, and the combined New England and Carolina study areas were all similar in magnitude and relative strength. The Quarry Operation model parameters, using the modified population density variables, were found to be a good predictor of new quarry locations. Both the aggregate industry and the land management community can use the model approach to target areas for more detailed site evaluation for quarry location. The models can be revised easily to reflect actual or anticipated changes in transportation and population features. ?? International Association for Mathematical Geology 2007.

Natural Resources Research↗
USGS2007

Influence of soil chemistry on metal and bioessential element concentrations in nymphal and adult periodical cicadas (Magicicada spp.)

Metal and bioessential element concentrations were measured in three species of 17-year periodical cicadas (Magicicada spp.) to determine how cicada tissue chemistry is affected by soil chemistry, measure the bioavailability of metals from both uncontaminated and lead-arsenate-pesticide contaminated soils, and assess the potential risks of observed metal contamination for wildlife. Periodical cicada nymphs feed on root xylem fluids for 13 or 17??years of underground development. The nymphs then emerge synchronously at high densities, before leaving their nymphal keratin exoskeleton and molting into their adult form. Cicadas are an important food source for birds and animals during emergence events, and influence nutrient cycles in woodland ecosystems. Nymphal exoskeletons and whole adult cicadas were sampled in Clarke and Frederick Counties, Virginia and Berkeley and Jefferson Counties, West Virginia during the Brood X emergence in May and June, 2004. Elements, such as Al, Fe, and Pb, are strongly enriched in the nymphal exoskeleton relative to the adult body; Cu and Zn are enriched in bodies. Concentrations of Fe and Pb, when normalized to relatively inert soil constituents such as Al and Ce, are similar in both the molt exoskeleton and their host soil, implying that passive assimilation through prolonged soil contact (adhesion or adsorption) might control these metal concentrations. Normalized concentrations of bioessential elements, such as S, P, K, Ca, Mn, Cu, Zn, and Mo, and chalcophile (sulfur-loving) elements, such as As, Se, and Au, indicate strong enrichment in cicada tissues relative to soil, implying selective absorption and retention by xylem fluids, the cicada nymphs themselves, or both. Element enrichment patterns in cicada tissues are similar to enrichment patterns observed in xylem fluids from tree roots. Chalcophile elements and heavy metals accumulate in keratin-rich tissues and may bind to sulfhydryl groups. Metal concentrations in the nymphal exoskeleton show a positive correlation with soil metal concentrations, with Au exhibiting particularly strong enrichment in the exoskeleton relative to soil concentrations. Metal concentrations in adult bodies do not correlate with soil chemistry. Bioessential elements S, Ca, Mn, Fe, and Zn differed by sex in adults, whereas Na, Mg, K, Ca, Mn, Fe, Zn, and As differed by species. Body concentrations of Ca differed by site conditions (orchard or reference setting). The high Pb contents of orchard soils contaminated by arsenical pesticide residues might inhibit Ca uptake by cicada nymphs. The adult cicadas contain concentrations of metals similar to, or less than, other invertebrates, such as earthworms. There does not appear to be a dietary threat to birds or other consumers of adult cicadas based on Maximum Tolerable Dietary Level (MTDL) Guidelines developed for agricultural animals.

Science of the Total Environment↗
USGS2006

Modeling the probability of arsenic in groundwater in New England as a tool for exposure assessment

We developed a process-based model to predict the probability of arsenic exceeding 5 ??g/L in drinking water wells in New England bedrock aquifers. The model is being used for exposure assessment in an epidemiologic study of bladder cancer. One important study hypothesis that may explain increased bladder cancer risk is elevated concentrations of inorganic arsenic in drinking water. In eastern New England, 20-30% of private wells exceed the arsenic drinking water standard of 10 micrograms per liter. Our predictive model significantly improves the understanding of factors associated with arsenic contamination in New England. Specific rock types, high arsenic concentrations in stream sediments, geochemical factors related to areas of Pleistocene marine inundation and proximity to intrusive granitic plutons, and hydrologic and landscape variables relating to groundwater residence time increase the probability of arsenic occurrence in groundwater. Previous studies suggest that arsenic in bedrock groundwater may be partly from past arsenical pesticide use. Variables representing historic agricultural inputs do not improve the model, indicating that this source does not significantly contribute to current arsenic concentrations. Due to the complexity of the fractured bedrock aquifers in the region, well depth and related variables also are not significant predictors. ?? 2006 American Chemical Society.

Environmental Science & Technology↗
USGS2006

The influence of geology and land use on arsenic in stream sediments and ground waters in New England, USA

Population statistics for As concentrations in rocks, sediments and ground water differ by geology and land use features in the New England region, USA. Significant sources of As in the surficial environment include both natural weathering of rocks and anthropogenic sources such as arsenical pesticides that were commonly applied to apple, blueberry and potato crops during the first half of the 20th century in the region. The variation of As in bedrock ground water wells has a strong positive correlation with geologic features at the geologic province, lithology group, and bedrock map unit levels. The variation of As in bedrock ground water wells also has a positive correlation with elevated stream sediment and rock As chemistry. Elevated As concentrations in bedrock wells do not correlate with past agricultural areas that used arsenical pesticides on crops. Stream sediments, which integrate both natural and anthropogenic sources, have a strong positive correlation of As concentrations with rock chemistry, geologic provinces and ground water chemistry, and a weaker positive correlation with past agricultural land use. Although correlation is not sufficient to demonstrate cause-and-effect, the statistics favor rock-based As as the dominant regional source of the element in stream sediments and ground water in New England. The distribution of bedrock geology features at the geologic province, lithology group and map unit level closely correlate with areas of elevated As in ground water, stream sediments, and rocks. ?? 2006 Elsevier Ltd. All rights reserved.

Applied Geochemistry↗
USGS2006

Bladder cancer mortality and private well use in New England: An ecological study

Study objective: To investigate the possible relation between bladder cancer mortality among white men and women and private water use in New England, USA, where rates have been persistently raised and use of private water supplies (wells) common. Design: Ecological study relating age adjusted cancer mortality rates for white men and women during 1985-1999 and proportion of persons using private water supplies in 1970. After regressing mortality rates on population density, Pearson correlation coefficients were computed between residual rates and the proportion of the population using private water supplies, using the state economic area as the unit of calculation. Calculations were conducted within each of 10 US regions. Setting: The 504 state economic areas of the contiguous United States. Participants: Mortality analysis of 11 cancer sites, with the focus on bladder cancer. Main results: After adjusting for the effect of population density, there was a statistically significant positive correlation between residual bladder cancer mortality rates and private water supply use among both men and women in New England (men, r=0.42; women, r=0.48) and New York/New Jersey (men, r=0.49; women, r=0.62). Conclusions: Use of well water from private sources, or a close correlate, may be an explanatory variable for the excess bladder cancer mortality in New England. Analytical studies are underway to clarify the relation between suspected water contaminants, particularly arsenic, and raised bladder cancer rates in northern New England.

Journal of Epidemiology and Community Health↗
USGS2004

Use of spatial statistics and isotopic tracers to measure the influence of arsenical pesticide use on stream sediment chemistry in New England, USA

Arsenical pesticides and herbicides, principally Pb arsenate, Ca arsenate, and Na arsenate with lesser use of other metal-As pesticides, were widely applied on apple, blueberry, and potato crops in New England during the first half of the twentieth century. Agricultural census data for this time period is used to define an agricultural index that identifies areas that are inferred to have used arsenical pesticides extensively. Factor analysis on metal concentrations in 1597 stream sediment samples collected throughout New England, grouped by agricultural-index categories, indicate a positive association of areas with stream sediment sample populations that contain higher As and Pb concentrations than samples from the region as a whole with sample site settings having high agricultural-index values. Population statistics for As and Pb concentrations and factor scores for an As-Pb factor all increase systematically and significantly with increasing agricultural-index intensity in the region, as tested by Kruskal-Wallis analysis. Lead isotope compositions for 16 stream sediments from a range of agricultural-index settings generally overlap the observed variation in rock sulfides and their weathering products; however, sediments collected from high agricultural-index settings have slightly more radiogenic Pb compositions, consistent with an industrial Pb contribution to these samples. Although weathering products from rocks are likely to be the dominant source of As and metals to most of the stream sediment samples collected in the region, the widespread use of arsenical pesticides and herbicides in New England during the early 1900-1960s appears to be a significant anthropogenic source of As and metals to many sediments in agricultural areas in the region and has raised background levels of As in some regions. Elevated concentrations of As in stream sediments are of concern for two reasons. Stream sediments with elevated As concentrations delineate areas with elevated background concentrations of As from both natural rock and anthropogenic sources that may contribute As to groundwater systems used for drinking water supplies. Conversion of agricultural land contaminated with arsenical pesticide residues to residential development may increase the likelihood that humans will be exposed to As. In addition, many stream sediment sites have As concentrations that exceed sediment quality guidelines established for freshwater ecosystems. Thirteen percent of the New England sediment sample sites exceed 9.79 mg/kg As, the threshold effects concentration (TEC), below which harmful effects are unlikely to be observed. Arsenic concentrations exceed 33 mg/kg, the probable effects concentration (PEC), above which harmful effects on sediment-dwelling organisms are expected to occur frequently, at 1.25% of the sediment sample sites. The sample sites that exceed the PEC value occur predominately in agricultural areas that used arsenical pesticides.

Conference Paper↗
USGS2004

Recycling of construction debris as aggregate in the Mid-Atlantic Region, USA

Reclaimed asphalt pavement (RAP) and portland cement concrete (RPCC) are abundant and available substitutes for natural aggregate in many areas. This paper presents an overview of factors that affect recycled aggregate cost, availability, and engineering performance, and the results of a survey of business practices in the Mid-Atlantic region. For RAP, processing costs are less than those for virgin natural aggregate. Use of efficient asphalt pavement stripping technology, on-site reclamation, and linked two-way transport of asphalt debris and processed asphalt paving mix between asphalt mix plants and paving sites has led to extensive recycling of asphalt pavement in the Mid-Atlantic region of the US. Most of the sites that recycle asphalt pavement (RAP) are located in or near urban areas close to important transportation corridors. RPCC is a viable aggregate source in urban settings where unit costs for processed aggregate from RPCC and natural aggregate are comparable. Disposal fees charged at RPCC recycling sites help defray processing costs and the significantly lower tipping fees at recycling sites versus landfill disposal sites encourage recycling of construction debris as aggregate. Construction contractors and construction debris recycling centers, many of which have the ability to crush and process concrete debris at the job site, produce most RPCC. Production of RPCC aggregate from construction debris that is processed on site using portable equipment moved to the construction site eliminates transportation costs for aggregate and provides an economic incentive for RPCC use. Processing costs, quality and performance issues, and lack of large quantities where needed limit RPCC use. Most RPCC suppliers in the Mid-Atlantic area are located in counties with population densities greater than 400 people/km2 (1036 people/mile2) and that have high unit-value costs and limited local availability of natural aggregate. ?? 2004 Published by Elsevier B.V.

Conference Paper↗
USGS2004

A GIS analysis of suitability for construction aggregate recycling sites using regional transportation network and population density features

Aggregate is used in road and building construction to provide bulk, strength, support, and wear resistance. Reclaimed asphalt pavement (RAP) and reclaimed Portland cement concrete (RPCC) are abundant and available sources of recycled aggregate. In this paper, current aggregate production operations in Virginia, Maryland, and the District of Columbia are used to develop spatial association models for the recycled aggregate industry with regional transportation network and population density features. The cost of construction aggregate to the end user is strongly influenced by the cost of transporting processed aggregate from the production site to the construction site. More than 60% of operations recycling aggregate in the mid-Atlantic study area are located within 4.8 km (3 miles) of an interstate highway. Transportation corridors provide both sites of likely road construction where aggregate is used and an efficient means to move both materials and on-site processing equipment back and forth from various work sites to the recycling operations. Urban and developing areas provide a high market demand for aggregate and a ready source of construction debris that may be processed into recycled aggregate. Most aggregate recycling operators in the study area are sited in counties with population densities exceeding 77 people/km2 (200 people/mile 2). No aggregate recycling operations are sited in counties with less than 19 people/km2 (50 people/mile2), reflecting the lack of sufficient long-term sources of construction debris to be used as an aggregate source, as well as the lack of a sufficient market demand for aggregate in most rural areas to locate a recycling operation there or justify the required investment in the equipment to process and produce recycled aggregate. Weights of evidence analyses (WofE), measuring correlation on an area-normalized basis, and weighted logistic regression (WLR), are used to model the distribution of RAP and RPCC operations relative to transportation network and population distribution data. The models can be used on a regional scale to quickly map the relative site suitability for a RAP or RPCC aggregate recycling operation in a particular area based on transportation network and population parameters. The results can be used to identify general areas to be further evaluated on a site-specific basis using more detailed marketplace information. As transportation or population features change due to planning or actual development, the models can be easily revised to reflect these changes. ?? 2004 Elsevier B.V. All rights reserved.

Resources, Conservation and Recycling↗
USGS2003

Generalized lithology and lithogeochemical character of near-surface bedrock in the New England region

This geographic information system (GIS) data layer shows the dominant lithology and geochemical, termed lithogeochemical, character of near-surface bedrock in the New England region covering the states of Connecticut, Maine, Massachusetts, New Hampshire, Rhode Island, and Vermont. The bedrock units in the map are generalized into groups based on their lithological composition and, for granites, geochemistry. Geologic provinces are defined as time-stratigraphic groups that share common features of age of formation, geologic setting, tectonic history, and lithology. This data set incorporates data from digital maps of two NAWQA study areas, the New England Coastal Basin (NECB) and the Connecticut, Housatonic, and Thames River Basins (CONN) areas and extends data to cover the states of Connecticut, Maine, Massachusetts, New Hampshire, Rhode Island, and Vermont. The result is a regional dataset for the lithogeochemical characterization of New England (the layer named NE_LITH). Polygons in the final coverage are attributed according to state, drainage area, geologic province, general rock type, lithogeochemical characteristics, and specific bedrock map unit.

Connecticut, Maine, Massachusetts, New Hampshire, ↗
USGS1988

Studies of the early Mesozoic basins of the eastern United States

The papers collected in this volume are extended versions selected from material given as oral and poster presentations at a workshop called "Geology of the Early Mesozoic Basins of Eastern North America,' held at the National Center of the US Geological Survey, May 11-14, 1987. The section titles are: 1) studies related to early Mesozoic sedimentary rocks, 2) studies related to Jurassic igneous rocks, 3) studies related to geophysics, structure, and tectonics, 4) studies related to mineral resources, and 5) fieldtrip guides to the Culpeper basin, Virginia. -from Editors

Bulletin↗
USGS1983

Heat capacty, relative enthalpy, and calorimetric entropy of silicate minerals: an empirical method of prediction.

Through the evaluation of experimental calorimetric data and estimates of the molar isobaric heat capacities, relative enthalpies and entropies of constituent oxides, a procedure for predicting the thermodynamic properties of silicates is developed. Estimates of the accuracy and precision of the technique and examples of its application are also presented. -J.A.Z.

American Mineralogist↗