USGS ScienceSearch

Geology topics

G. Paar

Publications and source records attributed to G. Paar.

4 recordsLinked to original sources

Paleo-scours within the layered sulfate-bearing unit at Gale crater, Mars: Evidence for intense wind erosion

The surface of modern Mars is largely shaped by wind, but the influence of past wind activity is less well constrained. Sedimentary rocks exposed in the lower foothills of Aeolis Mons, the central mound within Gale crater, record a transition from predominantly lacustrine deposition in the Murray formation to aeolian deposition in the Mirador formation. Here, we report a series of enigmatic decameter-wide, concave-up scour-and-fill structures within the Mirador formation and discuss their formation mechanisms. Using panoramic images of stratigraphy exposed in cliff faces acquired by the Curiosity rover, we map the extent, distribution and orientation of the scour-and-fill structures and document the sedimentary facies within and surrounding these structures. The scours are grouped into two classes: (A) scours with a simple, symmetric morphology and light-toned, draping infill; and (B) scours with lateral pinching and dark-toned infill. We find that the scour-enclosing environment is composed of planar, even-in-thickness laminations with a pin-stripe pattern which we interpret as wind-ripple strata formed within an aeolian sandsheet environment. Class B contains cm-scale cross-bedding and a wing-shaped feature making this scour-and-fill structure consistent with fluvial processes. We interpret scour fill of class A as an aeolian infill due to similarities with the surrounding sandsheet strata. The broad morphologies and distribution of class A are also consistent with the geometry of blowout structures formed by localized, enhanced wind deflation. These paleo-blowout structures occur clustered within the same stratigraphic interval, which may imply that they record an interval of intensified wind activity at Gale crater.

JGR Planets

An examination of soil crusts on the floor of Jezero crater, Mars

Martian soils are critically important for understanding the history of Mars, past potentially habitable environments, returned samples, and future human exploration. This paper examines soil crusts on the floor of Jezero crater encountered during initial phases of the Mars 2020 mission. Soil surface crusts have been observed on Mars at other locations, starting with the two Viking Lander missions. Rover observations show that soil crusts are also common across the floor of Jezero crater, revealed in 45 of 101 locations where rover wheels disturbed the soil surface, 2 out of 7 helicopter flights that crossed the wheel tracks, and 4 of 8 abrasion/drilling sites. Most soils measured by the SuperCam laser-induced breakdown spectroscopy (LIBS) instrument show high hydrogen content at the surface, and fine-grained soils also show a visible/near infrared (VISIR) 1.9 µm H 2 O absorption feature. The Planetary Instrument for X-ray Lithochemistry (PIXL) and SuperCam observations suggest the presence of salts at the surface of rocks and soils. The correlation of S and Cl contents with H contents in SuperCam LIBS measurements suggests that the salts present are likely hydrated. On the “Naltsos” target, magnesium and sulfur are correlated in PIXL measurements, and Mg is tightly correlated with H at the SuperCam points, suggesting hydrated Mg-sulfates. Mars Environmental Dynamics Analyzer (MEDA) observations indicate possible frost events and potential changes in the hydration of Mg-sulfate salts. Jezero crater soil crusts may therefore form by salts that are hydrated by changes in relative humidity and frost events, cementing the soil surface together.

Journal of Geophysical Research: Planets

Aqueously altered igneous rocks sampled on the floor of Jezero crater, Mars

The Perseverance rover landed in Jezero crater, Mars, to investigate ancient lake and river deposits. We report observations of the crater floor, below the crater’s sedimentary delta, finding the floor consists of igneous rocks altered by water. The lowest exposed unit, informally named Séítah, is a coarsely crystalline olivine-rich rock, which accumulated at the base of a magma body. Fe-Mg carbonates along grain boundaries indicate reactions with CO 2 -rich water, under water-poor conditions. Overlying Séítah is a unit informally named Máaz, which we interpret as lava flows or the chemical complement to Séítah in a layered igneous body. Voids in these rocks contain sulfates and perchlorates, likely introduced by later near-surface brine evaporation. Core samples of these rocks were stored aboard Perseverance for potential return to Earth.

Science

The Mars 2020 Perseverance rover mast camera zoom (Mastcam-Z) multispectral, stereoscopic imaging investigation

Mastcam-Z is a multispectral, stereoscopic imaging investigation on the Mars 2020 mission’s Perseverance rover. Mastcam-Z consists of a pair of focusable, 4:1 zoomable cameras that provide broadband red/green/blue and narrowband 400-1000 nm color imaging with fields of view from 25.6° × 19.2° (26 mm focal length at 283 μrad/pixel) to 6.2° × 4.6° (110 mm focal length at 67.4 μrad/pixel). The cameras can resolve (≥ 5 pixels) ∼0.7 mm features at 2 m and ∼3.3 cm features at 100 m distance. Mastcam-Z shares significant heritage with the Mastcam instruments on the Mars Science Laboratory Curiosity rover. Each Mastcam-Z camera consists of zoom, focus, and filter wheel mechanisms and a 1648 × 1214 pixel charge-coupled device detector and electronics. The two Mastcam-Z cameras are mounted with a 24.4 cm stereo baseline and 2.3° total toe-in on a camera plate ∼2 m above the surface on the rover’s Remote Sensing Mast, which provides azimuth and elevation actuation. A separate digital electronics assembly inside the rover provides power, data processing and storage, and the interface to the rover computer. Primary and secondary Mastcam-Z calibration targets mounted on the rover top deck enable tactical reflectance calibration. Mastcam-Z multispectral, stereo, and panoramic images will be used to provide detailed morphology, topography, and geologic context along the rover’s traverse; constrain mineralogic, photometric, and physical properties of surface materials; monitor and characterize atmospheric and astronomical phenomena; and document the rover’s sample extraction and caching locations. Mastcam-Z images will also provide key engineering information to support sample selection and other rover driving and tool/instrument operations decisions.

Space Science Reviews