USGS Science⌕ Search

Geology topics

Frank T. Dulong

Publications and source records attributed to Frank T. Dulong.

At least 19 recordsLinked to original sources
USGS2020

Organic petrography of Leonardian (Wolfcamp A) mudrocks and carbonates, Midland Basin, Texas: The fate of oil-prone sedimentary organic matter in the oil window

To better understand evolution of oil-prone sedimentary organic matter to petroleum and expulsion from source rock, we evaluated organic petrographic features of Leonardian Wolfcamp A repetitive siliceous and calcareous mudrock and fine-grained carbonate lithofacies cycles occurring in the R. Ricker #1 core from Reagan County, Midland Basin, Texas. The objectives of the petrographic investigation were to estimate thermal maturity, identify organic matter types and abundances, and identify the presence or absence of migrated hydrocarbons in organic-lean carbonate layers. An integrated analytical program included geochemical screening [total organic carbon (TOC) content by LECO, programmed pyrolysis by hydrocarbon analyzer with kinetics (HAWK) including analysis of solvent-extracted samples], X-ray diffraction mineralogy, organic petrography, scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS) including correlative light and electron microscopy (CLEM), and micro-Fourier transform infrared spectroscopy (μ-FTIR) analyses of solid bitumen. The data indicate all samples are early to middle oil window thermal maturity with solid bitumen reflectance (BR o ) values of 0.55–0.86% and T max of 440–455 °C. Organic matter is predominantly solid bitumen (as identified by optical microscopy) in all lithofacies with minor contributions from inertinite. Solid bitumen abundance decreases from siliceous mudrock (TOC >3.0 wt%) to calcareous mudrock (TOC 1.0 to 3.0 wt%) to fine-grained carbonate (TOC <1.0 wt%) lithofacies. Interpretations of petrographic data suggest siliceous and calcareous mudrocks are source rock lithofacies and contain solid bitumen (with petroleum generation potential) that is residual (what remains) from conversion of an original Type II sedimentary organic matter. In turn, fine-grained carbonates are interpreted as reservoir lithofacies which contained little or no original oil-prone sedimentary organic matter and at present-day contain only a minor component of migrated solid petroleum sourced from adjacent siliceous and calcareous mudrock lithofacies. This work helps to document petroleum generation and migration processes, improve unconventional reservoir characterization and better define areas of oil window thermal maturity in an area critical to United States hydrocarbon production.

Texas↗
USGS2020

Characterization of the unconventional Tuscaloosa marine shale reservoir in southwestern Mississippi, USA: Insights from optical and SEM petrography

This study presents new optical petrography and electron microscopy data, interpreted in the context of previously published petrophysical, geochemical, and mineralogical data, to further characterize the Tuscaloosa marine shale (TMS) as an unconventional reservoir in southwestern Mississippi. The basal high resistivity zone has a higher proportion of Type II sedimentary organic matter than the overlying TMS, indicating it is more prone to oil generation. Optical petrography and electron microscopy reveal a heterogeneous clay matrix with ubiquitous pyrite grains, quartz, feldspar, glaucony, foraminifera, shell fragments, and rarer occurrences of apatite and crinoid fragments as well as liptinite, alginite, inertinite, and vitrinite. Our petrographic observations suggest that higher abundances of detrital quartz grains coupled with minimal authigenic cements result in higher porosity and permeability. However, the TMS is also more clay-rich than other unconventional shale oil and gas plays, which can impair the effectiveness of hydraulic fracture stimulation. Thin section observations reveal alternating clay and calcium carbonate laminae that are interpreted to reflect changes in sediment flux. Planktonic foraminifera indicate an overlying oxygenated water column while benthic inoceramid fragments and pervasive authigenic pyrite suggest anoxic or dysoxic bottom water conditions. Apatite fragments in thin section suggest mixing events and an influx of nutrient-rich sediments. Overall, these observations suggest that a variety of paleodepositional environments occurred in the TMS and the lithofacies diversity resulting from these small-scale depositional cycles makes it difficult to determinatively identify areas conducive to enhanced economic hydrocarbon recovery.

Mississippi, Lousianna↗
USGS2020

Oil-source rock correlation studies in the unconventional Upper Cretaceous Tuscaloosa marine shale (TMS) petroleum system, Mississippi and Louisiana, USA

The U.S. Geological Survey assessed undiscovered unconventional hydrocarbon resources reservoired in the Upper Cretaceous Tuscaloosa marine shale (TMS) of southern Mississippi and adjacent Louisiana in 2018. As part of the assessment, oil-source rock correlations were examined in the TMS play area where operators produce light (38–45° API), sweet oil from horizontal, hydraulically-fractured wells in an overpressured ‘high-resistivity’ (>5 Ω-m) zone at the base of the TMS. Geochemical data from 39 oil samples and 17 source rock solvent extracts collected from the TMS play area indicate close correspondence for Tuscaloosa Group oils [from lower Tuscaloosa, middle Tuscaloosa (the TMS) and upper Tuscaloosa reservoirs] in thermal maturity (computed from MPI), SARA proportions, n- alkane distributions, isoprenoid and DBT/P ratios, monoaromatic steroids, and δ 13 C isotopic compositions (from whole oils, saturate and aromatic fractions). Other parameters (normal steranes, extended homohopanes, C 31 R/C 30 hopane, norhopane/hopane and tricyclic terpane ratios, gammacerane/hopane) show most oil samples have similar values, suggesting all Tuscaloosa Group oils are from a common mixed marine-terrigenous source rock. Tighter distributions for triaromatic steroid (TAS) and δ 13 C isotopic composition for conventional oils in lower and upper Tuscaloosa reservoirs may indicate charge occurred in a single or shorter pulse relative to TMS oils which show broader TAS and δ 13 C properties, possibly from their generation over an extended period of burial maturation. Dissimilarity in geochemical properties between lower Tuscaloosa source rock solvent extracts and Tuscaloosa Group oils indicates lower Tuscaloosa source rocks did not contribute significantly to conventional and unconventional Tuscaloosa Group hydrocarbon accumulations. Whereas, TMS solvent extracts are similar to Tuscaloosa Group oils, suggesting an oil-source rock correlation. Excluding the possibility for long-distance lateral migration from a similar source downdip (which is unnecessary given thermal maturity considerations), the observations indicate 1. the TMS is a self-sourced reservoir, 2. the TMS is the source of oils accumulated in nearby conventional Tuscaloosa Group reservoirs, and 3. thin organic-rich shales in the lower Tuscaloosa did not contribute substantially to any oil accumulations in the Tuscaloosa Group.

Louisiana, Mississippi↗
USGS2019

Lithologies, ages, and provenance of clasts in the Ordovician Fincastle Conglomerate, Botetourt County, Virginia, USA

The Fincastle Conglomerate is an Ordovician polymictic, poorly sorted, matrix- and clast-supported cobble to boulder-rich conglomerate located just north of Fincastle, Botetourt County, VA. At least nine other cobble and boulder conglomerates are located in a similar stratigraphic position from Virginia to Georgia west of the Blue Ridge structural front. All except the Fincastle are dominated (~80%) by carbonate clasts; Fincastle clasts are much more varied and siliceous and it is this clast diversity that provides increased value for provenance and related studies. We have used a multidisciplinary approach that involves conodont analysis, sandstone petrography, in-situ outcrop clast characterization, optical petrography, electron-beam petrography and chemical analysis, and X-ray diffraction to provide data on lithologies, ages, and provenance. The size, roundness, and lithology of 1,656 clasts (> 1 cm) were measured in the field. Although, the clast lithology varies among the studied localities, the average lithology is sandstone and siltstone 12 %, vein quartz 17 %, limestone 31 %, low-grade quartzite/metasandstone 31 %, chert 6 %, and others 3 %. Dolomite, igneous, or high-grademetamorphic rock clastswere not identified in field study or in detailed laboratory analysis.Dolomite rhombs and authigenic albite feldsparwere observed in some limestone clasts. Quantitative petrographic data for the Fincastle sandstone clasts indicate tectonic environments from passive margin to transitional continental uplift, but the conglomeratematrixmodes have considerably less feldspar and plot in the foreland basin tectonic environment region. Proto-, para-, and euconodonts were identified from clast and matrix, but are long-ranging fauna indicating middle Cambrian toMiddle or Late Ordovician ages; color alteration index (CAI) for euconodonts varied from 3 to 3.5. The occurrence of well-rounded clasts including limestone suggests a nearby, high-energy environment, and that transport was rapid enough to preserve limestone before deposition into a foreland basin. The lack of igneous or high-grade metamorphic rocks clasts suggests that the erosional level sampled by the Fincastle Conglomerate did not include the underlying Grenville basement of igneous or high-grade metamorphic rocks.

Virginia↗
USGS2018

Assessment of undiscovered continuous oil and gas resources in the Upper Cretaceous Tuscaloosa marine shale of the U.S. Gulf Coast, 2018

Using a geology-based assessment methodology, the U.S. Geological Survey assessed mean undiscovered, technically recoverable continuous resources of 1.5 billion barrels of oil and 4.6 trillion cubic feet of gas in the Upper Cretaceous Tuscaloosa marine shale in onshore and State waters of Louisiana, Mississippi, Alabama, and Florida in the U.S. Gulf Coast region.

Upper Cretaceous Tuscaloosa Marine Shale↗
USGS2018

The chemistry of eolian quartz dust and the origin of chert

Among the numerous models that have been suggested for the primary and predominant source of silica for chert, we suggest that eolian dust is worthy of further considerations. Such considerations are supported by the common association of Phanerozoic chert with evaporites, limestones, dolomites, or other strata that were deposited within or near arid paleoclimates. This association suggests a direct or indirect causal link between aridity and chert formation. In addition, eolian processes export large quantities of quartz-rich dust from arid climate ergs or loess lands. The chemistry of abraded quartz particles derived therefrom is consistent with chert formation. Abrasion of quartz particles produces an amorphous surface layer and underlying lattice disorder. An inverse relation between particle size distribution (< 64 μm) and the enthalpy of solution of abraded quartz is indicative of the degree of lattice disorder; as particle size decreases, the enthalpy of solution increases. The amorphous surface layer and underlying lattice disorder enhance both the rate and amount of dissolution of quartz dust particles; the solubilized silica can then be reprecipitated and diagenetically altered to the various silica polymorphs that occur in chert. An eolian supply and the chemistry of eolian abraded quartz particles may account for chert formation in disparate depositional environments that encompass deep-sea chert, chert in epicontinental seas including shallow shelves, and chert that formed in continental eolinites, lakes, and soils (arid climate silcretes).

Journal of Sedimentary Research↗
USGS2017

Geologic characterization of the hydrocarbon resource potential of the Upper Cretaceous Tuscaloosa marine shale in Mississippi and Louisiana, U.S.A.

Recent oil production from the Upper Cretaceous Tuscaloosa marine shale (TMS) has elevated the formation, previously assessed by the USGS in 2011 as part of the Eagle Ford Group, to its own distinct assessment unit for an upcoming assessment. Geologic characterization in preparation for the 2017 assessment has included the analysis of rock samples and produced oils, and the interpretation of well logs and biostratigraphic data. Results include new mapped extents of the reservoir, which reaches a maximum thickness of almost 500 feet in southern Mississippi and central Louisiana, and geochemical interpretations which support a self-sourced origin for high gravity (36-48 API) low sulfur oil. Programmed pyrolysis and petrography indicate the TMS contains dominantly Type III gas-prone kerogen with some Type II oil-prone kerogen present in the most organic-rich samples. TMS samples contain an average of 47 weight percent total clays, had organic carbon content which ranged from 0.14 to 4.0 weight percent, and had a thermal maturity of 0.57 to 0.99 percent vitrinite reflectance in the productive area. These characteristics were the same for the TMS within an area defined as a “high resistivity zone” and outside of it. These results will be integral to the planned USGS assessment of the TMS.

Conference Paper↗
USGS2016

Aptian ‘Shale Gas’ Prospectivity in the Downdip Mississippi Interior Salt Basin, Gulf Coast, USA

This study evaluates regional ‘shale gas’ prospectivity of the Aptian section (primarily Pine Island Shale) in the downdip Mississippi Salt Basin (MSB). Previous work by the U.S. Geological Survey estimated a mean undiscovered gas resource of 8.8 trillion cubic feet (TCF) in the chronostratigraphic-equivalent Pearsall Formation in the Maverick Basin of south Texas, where industry has established a moderately successful horizontal gas and liquids play. Wells penetrating the downdip MSB Aptian section at depths of 12,000-15,000 ft were used to correlate formation tops in a 15-well cross-section extending about 200 miles (mi) east-southeastward from Adams Co. to Jackson Co. Legacy cuttings from these wells were analyzed for thermal maturity and source rock quality. Bitumen reflectance (n=53) increases with increasing present-day burial depth in the east-central study area from 1.0% to 1.7%. As the Aptian section shallows in Adams Co. to the west, bitumen Ro values are higher (1.7-2.0%), either from relatively greater heat flux or greater mid-Cenomanian uplift and erosion in this area. Total organic carbon (TOC) content ranges 0.01-1.21 and averages 0.5 wt.% (n=51); pyrolysis output (S2; n=51) averages 0.40 mg HC/g rock, indicating little present-day hydrocarbon-generative potential. Bitumen reflectance is preferred as a thermal maturity parameter as Tmax values are unreliable. Normalized X-ray diffraction (XRD) mineral analyses (n=26) indicate high average clay abundance (53 wt.%) relative to quartz (29%) and carbonate (18%). Mineral content shows a spatial relationship to an Appalachian orogen clastic sediment source, with proximal high clay and quartz and distal high carbonate content. Clastic influx from the Appalachian orogen is confirmed by detrital zircon U-Pb ages with dominant Grenville and Paleozoic components [105 ages from a Rodessa sandstone and 112 ages from a Paluxy (Albian) sandstone]. Preliminary information from fluid inclusion microthermometry (41 aqueous measurements from calcite cements in one argillaceous James Limestone sample) indicates homogenization temperatures (Th) of 120-135°C, consistent with present-day bottom-hole conditions and measured bitumen Ro values towards the western end of the MSB. Downdip in the central MSB, microthermometry (26 aqueous measurements from quartz dust rims in one Paluxy sandstone sample) and measured bitumen Ro values indicate maximum temperatures may have been significantly higher (~25°C) than present-day conditions. High inclusion salinities (15-25 wt.% salt) at both locations suggest interaction of pore fluids with evaporites. Mercury injection capillary pressure (MICP) analyses (n=3) indicate porosity ranges 1.3-2.1% and permeability 0.006-0.02 µD for Pine Island and Rodessa shales. Overall, results from this work indicate generally poor ‘shale gas’ prospectivity compared to other shale reservoirs based primarily on depth, low organic content, low porosity, and high clay content. However, thickness and thermal maturity are appropriate, moderate reservoir pressures are present, and petroleum systems modelling by others has indicated high undiscovered gas potential for the basin as a whole.

Conference Paper↗
USGS2015

Geochemical and mineralogical sampling of the Devonian shales in the Broadtop synclinorium, Appalachian basin, in Virginia, West Virginia, Maryland, and Pennsylvania

Reconnaissance field mapping and outcrop sampling for geochemical and mineralogical analyses indicate that the Middle Devonian Marcellus Shale in the Broadtop synclinorium and nearby areas from southeastern West Virginia to south-central Pennsylvania has an organic content sufficiently high and a thermal maturity sufficiently moderate to be considered for a shale gas play. The organic matter-rich Marcellus Shale is present throughout most of the synclinorium, being absent only where it has been eroded from the crest of anticlines. Geochemical analyses of outcrop and well drill-cuttings samples indicate that variable levels of hydrocarbons have been generated and expelled from the kerogen originally in place in the mudstone. The mineralogical characteristics of the Marcellus Shale samples from the study area are conducive to a continuous resource play, but the Middle Devonian strata are folded, faulted, and moderately to heavily sheared in the Broadtop synclinorium. The presence of conventional anticlinal gas fields in the study area that are productive from the underlying Lower Devonian Oriskany Sandstone suggests that an unconventional (or continuous) shale gas system may be in place within the Marcellus Shale in the study area. Results of this study indicate that the Marcellus Shale in the Broadtop synclinorium generally is similar in organic geochemical nature throughout its extent, and based on the sample analyses, there are no clearly identifiable high potential areas (or &ldquo;sweet spots&rdquo;) in the study area. This report contains analyses of 132 outcrop and well drill-cuttings samples.

Maryland, Pennsylvania, Virginia, West Virginia↗
USGS2014

Organic petrology of the Aptian-age section in the downdip Mississippi Interior Salt Basin, Mississippi, USA: Observations and preliminary implications for thermal maturation history

This study identifies a thermal maturity anomaly within the downdip Mississippi Interior Salt Basin (MISB) of southern Mississippi, USA, through examination of bitumen reflectance data from Aptian-age strata (Sligo Formation, Pine Island Shale, James Limestone, and Rodessa Formation). U.S. Geological Survey (USGS) reconnaissance investigations conducted in 2011–2012 examined Aptian-age thermal maturity trends across the onshore northern Gulf of Mexico region and indicated that the section in the downdip MISB is approaching the wet gas/condensate window (R o ~1.2%). A focused study in 2012–2013 used 6 whole core, one sidewall core, and 49 high-graded cutting samples (depth range of 13,000–16,500 ft [3962.4–5029.2 m] below surface) collected from 15 downdip MISB wells for mineralogy, fluid inclusion, organic geochemistry, and organic petrographic analysis. Based on native solid bitumen reflectance (R o generally > 0.8%; interpreted to be post-oil indigenous bitumens matured in situ), R o values increase regionally across the MISB from the southeast to the northwest. Thermal maturity in the eastern half of the basin (R o range 1.0 to 1.25%) appears to be related to present-day burial depth and shows a gradual increase with respect to depth. To the west, thermal maturity continues to increase even as the Aptian section shallows structurally on the Adams County High (R o range 1.4 to > 1.8%). After evaluating the possible thermal agents responsible for increasing maturity at shallower depths (i.e., igneous activity, proximity to salt, variations in regional heat flux, and uplift), we tentatively propose that either greater paleoheat flow or deeper burial coupled with uplift in the western part of the MISB could be responsible for the thermal maturity anomaly. Further research and additional data are needed to determine the cause(s) of the thermal anomaly.

International Journal of Coal Geology↗
USGS2014

Powder X-ray diffraction laboratory, Reston, Virginia

The powder x-ray diffraction (XRD) laboratory is managed jointly by the Eastern Mineral and Environmental Resources and Eastern Energy Resources Science Centers. Laboratory scientists collaborate on a wide variety of research problems involving other U.S. Geological Survey (USGS) science centers and government agencies, universities, and industry. Capabilities include identification and quantification of crystalline and amorphous phases, and crystallographic and atomic structure analysis for a wide variety of sample media. Customized laboratory procedures and analyses commonly are used to characterize non-routine samples including, but not limited to, organic and inorganic components in petroleum source rocks, ore and mine waste, clay minerals, and glassy phases. Procedures can be adapted to meet a variety of research objectives.

Virginia↗
USGS2009

Characterization of rock samples and mineralogical controls on leachates

Rocks associated with coal beds typically include shale, sandstone, and (or) limestone. In addition to common rock-forming minerals, all of these rock types may contain sulfide and sulfate minerals, various carbonate minerals, and organic material. These different minerals have inherently different solubility characteristics, as well as different acid-generating or acid-neutralizing potentials. The abundance and composition of sulfur- and carbonate-bearing minerals are of particular interest in interpreting the leaching column data because (1) pyrite and carbonate minerals are the primary controls on the acid-base account of a sample, (2) these minerals incorporate trace metals that can be released during weathering, and (3) these minerals readily react during weathering due to mineral dissolution and oxidation of iron. Rock samples were collected by the Pennsylvania Department of Environmental Protection (PaDEP) from five different sites to assess the draft standardized leaching column method (ADTI-WP2) for the prediction of weathering rates and water quality at coal mines. Samples were sent to USGS laboratories for mineralogical characterization and to ActLabs for chemical analysis. The samples represent a variety of rock types (shales, sandstones, and coal refuse) that are typical of coal overburden in the eastern United States. These particular samples were chosen for testing the weathering protocols because they represent a range of geochemical and lithologic characteristics, sulfur contents, and acid-base accounting characteristics (Hornberger et al., 2003). The rocks contain variable amounts of pyrite and carbonate minerals and vary in texture. This chapter includes bulk rock chemical data and detailed mineralogical and textural data for unweathered starting materials used in the interlaboratory validation study, and for two samples used in the early phases of leaching column tests (Wadesville Sandstone, Leechburg Coal Refuse). We also characterize some of the post-weathering rock samples, report trace-element content in leachate, and discuss mineralogical controls on leachate quality based on data from one of the participating laboratories. Table 5.1 lists the samples described in this chapter, the sample numbers, and comments on the characteristics of each lithology. Sample locations are plotted in Figure 5.1. Chapters 2 and 3 describe the sample locations, sample preparation protocols, ABA characteristics, and rationale for selection of rock samples for testing. Microprobe data for pyrite and carbonate minerals are tabulated in Appendix 5.1. Leachate data, along with a series of graphs showing concentration and cumulative transport trends, for the laboratory data discussed in this chapter are included as Excel spreadsheets in Appendices 5.2 and 5.3. Leach column data for the interlaboratory study are evaluated and interpreted in Chapters 7 -11.

Arkansas, Florida, Georgia, Illinois, Indiana, Iow↗
USGS2007

Selenium Concentrations in Middle Pennsylvanian Coal-Bearing Strata in the Central Appalachian Basin

Introduction This report provides the results of a reconnaissance-level investigation of selenium (Se) concentrations in Middle Pennsylvanian coal-bearing strata in the central Appalachian basin. Bryant and others (2002) reported enrichments of Se concentrations in streams draining areas disturbed by surface mining relative to Se concentrations in streams that drain undisturbed areas; the study was conducted without the benefit of data on Se concentrations in coal-bearing strata prior to anthropogenic disturbance. Thus, the present study was conducted to provide data on Se concentrations in coal-bearing strata prior to land disturbance. The principal objectives of this work are: 1) determine the stratigraphic and regional distribution of Se concentrations in coal-bearing strata, 2) provide reconnaissance-level information on relations, if any, between Se concentrations and lithology (rock-type), and 3) develop a cursory evaluation of the leachability of Se from disturbed strata. The results reported herein are derived from analyses of samples obtained from three widely-spaced cores that were collected from undisturbed rock within a region that has been subjected to extensive land disturbance principally by either coal mining or, to a lesser extent, highway construction. The focus was on low-organic-content lithologies, not coal, within the coal-bearing interval, as these lithologies most commonly make up the fill materials after coal mining or in road construction.

Open-File Report↗
USGS2006

Analytical results from samples collected during coal-bed methane exploration drilling in Caldwell Parish, Louisiana

In 2001, and 2002, the U.S. Geological Survey (USGS) and the Louisiana Geological Survey (LGS), through a Cooperative Research and Development Agreement (CRADA) with Devon SFS Operating, Inc. (Devon), participated in an exploratory drilling and coring program for coal-bed methane in north-central Louisiana. The USGS and LGS collected 25 coal core and cuttings samples from two coal-bed methane test wells that were drilled in west-central Caldwell Parish, Louisiana. The purpose of this report is to provide the results of the analytical program conducted on the USGS/LGS samples. The data generated from this project are summarized in various topical sections that include: 1. molecular and isotopic data from coal gas samples; 2. results of low-temperature ashing and X-ray analysis; 3. palynological data; 4. down-hole temperature data; 5. detailed core descriptions and selected core photographs; 6. coal physical and chemical analytical data; 7. coal gas desorption results; 8. methane and carbon dioxide coal sorption data; 9. coal petrographic results; and 10. geophysical logs.

Open-File Report↗
USGS1997

X-ray powder diffraction

This handout provides background on the use and theory of X-ray powder diffraction. Examples of applications of this method to geologic studies are provided.

Information Handout↗