Geology topics

Frank P. Seelos

Publications and source records attributed to Frank P. Seelos.

4 recordsLinked to original sources

USGS2024

Novel quantitative methods to enable multispectral identification of high-purity water ice exposures on Mars using High Resolution Imaging Science Experiment (HiRISE) images

Reliable detection and characterization of water ice on the Martian surface is pivotal to not only understand its present and past climate, but to also provide valuable information on in-situ resource availability and distribution for future human exploration missions. Ice-rich features are currently identified with visible/near-IR (VNIR), thermal IR and radar data. However, their coarse spatial scale sometimes limits confident characterization of small (i.e., meter-scale) icy exposures resulting from recent activity like new impacts. Water ice bearing materials possess weaker spectral characteristics at wavelengths shorter than ∼1030 nm that may be resolved by VNIR imaging instruments like the High Resolution Imaging Science Experiment (HiRISE) and the Colour and Stereo Surface Imaging System (CaSSIS). Our study assesses the spectral capability of HiRISE colour observations to help distinguish high purity water ice exposures from ice-poor materials. We report detailed methodologies for reliable colour characterization of icy surface using unfiltered HiRISE images. We present the first quantitative approach to uniquely characterize high-purity ice-rich materials through spectral shape and spectral parameterization methods at high spatial resolution (∼50 cm/pixel). We also present three spectral parameters to aid detection of pure water ice features, while also providing statistical constraints to enable a quantitative interpretation scheme. Our methods are observed to work well in characterizing and separating ice-rich features uniquely from ice-poor and ferrous materials. However, we do observe that these methods have a lower grain size detection limit of ∼250–300 μm, and may not be able to uniquely separate frosts from ground ice exposures. We also apply these methods to better constrain the composition of bright materials exposed by recent impacts identified in previous surveys, where substantial evidence for ice-bearing materials was previously unavailable. Overall, our work proposes HiRISE colour-based methods as a novel approach for high-resolution multispectral characterization of ice-rich features on the Martian surface, which is of particular value since the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) has ceased operations.

Icarus↗

USGS2021

Maximizing the science and resource mapping potential of Orbital VSWIR Spectral measurements of Mars

The last 16 years witnessed a rapid growth in understanding the composition and aqueous alteration of Mars’ surface from orbital data from the Observatoire pour la Mineralogie, l’Eau, les Glaces et l’Activité (OMEGA) [1] and Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) [2]. Both are sensitive to water-, hydroxyl-, sulfate-, and carbonate-bearing and ferric phases that record past liquid water. As the spatial resolution of such data has improved, and supporting laboratory data have been acquired, the diversity of mineral phases that are recognized has likewise expanded. The same phases typically contain recoverable water, a resource for future human exploration, and are the only near-surface water reservoir in the >50% of Mars over which ice likely does not occur in the shallowest subsurface. Knowledge of the distribution and abundance of these water-bearing phases, and their geologic implications, is limited by spatial resolution of the available data. A revolutionary advance in understanding the inventory, diversity, and stratigraphy of these materials can be obtained from Mars orbit, using two complementary approaches: hyperspectral imaging at ~6 meters per pixel at 0.7–4 µm, and 1 meter-per-pixel imaging at selected VSWIR wavelengths from 0.4–1.7 µm.

Bulletin of the AAS↗

USGS2017

Image simulation and assessment of the colour and spatial capabilities of the Colour and Stereo Surface Imaging System (CaSSIS) on the ExoMars Trace Gas Orbiter

This study aims to assess the spatial and visible/near-infrared (VNIR) colour/spectral capabilities of the 4-band Colour and Stereo Surface Imaging System (CaSSIS) aboard the ExoMars 2016 Trace Grace Orbiter (TGO). The instrument response functions for the CaSSIS imager was used to resample spectral libraries, modelled spectra and to construct spectrally ( i.e. , in I/F space) and spatially consistent simulated CaSSIS image cubes of various key sites of interest and for ongoing scientific investigations on Mars. Coordinated datasets from Mars Reconnaissance Orbiter (MRO) are ideal, and specifically used for simulating CaSSIS. The Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) provides colour information, while the Context Imager (CTX), and in a few cases the High-Resolution Imaging Science Experiment (HiRISE), provides the complementary spatial information at the resampled CaSSIS unbinned/unsummed pixel resolution (4.6 m/pixel from a 400-km altitude). The methodology used herein employs a Gram-Schmidt spectral sharpening algorithm to combine the ∼18–36 m/pixel CRISM-derived CaSSIS colours with I/F images primarily derived from oversampled CTX images. One hundred and eighty-one simulated CaSSIS 4-colour image cubes (at 18–36 m/pixel) were generated (including one of Phobos) based on CRISM data. From these, thirty-three “fully”-simulated image cubes of thirty unique locations on Mars ( i.e. , with 4 colour bands at 4.6 m/pixel) were made. All simulated image cubes were used to test both the colour capabilities of CaSSIS by producing standard colour RGB images, colour band ratio composites (CBRCs) and spectral parameters. Simulated CaSSIS CBRCs demonstrated that CaSSIS will be able to readily isolate signatures related to ferrous (Fe 2+ ) iron- and ferric (Fe 3+ ) iron-bearing deposits on the surface of Mars, ices and atmospheric phenomena. Despite the lower spatial resolution of CaSSIS when compared to HiRISE, the results of this work demonstrate that CaSSIS will not only compliment HiRISE-scale studies of various geological and seasonal phenomena, it will also enhance them by providing additional colour and geologic context through its wider and longer full-colour coverage ( ∼ 9.4 × 50 "> ∼ 9.4 × 50 ∼9.4×50 km), and its increased sensitivity to iron-bearing materials from its two IR bands (RED and NIR). In a few examples, subtle surface changes that were not easily detected by HiRISE were identified in the simulated CaSSIS images. This study also demonstrates the utility of the Gram-Schmidt spectral pan-sharpening technique to extend VNIR colour/spectral capabilities from a lower spatial resolution colour/spectral dataset to a single-band or panchromatic image greyscale image with higher resolution. These higher resolution colour products (simulated CaSSIS or otherwise) are useful as means to extend both geologic context and mapping of datasets with coarser spatial resolutions. The results of this study indicate that the TGO mission objectives, as well as the instrument-specific mission objectives, will be achievable with CaSSIS.

Space Science Reviews↗

USGS2013

Prolonged magmatic activity on Mars inferred from the detection of felsic rocks

Rocks dominated by the silicate minerals quartz and feldspar are abundant in Earth’s upper continental crust. Yet felsic rocks have not been widely identified on Mars, a planet that seems to lack plate tectonics and the associated magmatic processes that can produce evolved siliceous melts on Earth. If Mars once had a feldspar-rich crust that crystallized from an early magma ocean such as that on the Moon, erosion, sedimentation and volcanism have erased any clear surface evidence for widespread felsic materials. Here we report near-infrared spectral evidence from the Compact Reconnaissance Imaging Spectrometer for Mars onboard the Mars Reconnaissance Orbiter for felsic rocks in three geographically disparate locations on Mars. Spectral characteristics resemble those of feldspar-rich lunar anorthosites, but are accompanied by secondary alteration products (clay minerals). Thermodynamic phase equilibrium calculations demonstrate that fractional crystallization of magma compositionally similar to volcanic flows near one of the detection sites can yield residual melts with compositions consistent with our observations. In addition to an origin by significant magma evolution, the presence of felsic materials could also be explained by feldspar enrichment by fluvial weathering processes. Our finding of felsic materials in several locations on Mars suggests that similar observations by the Curiosity rover in Gale crater may be more widely applicable across the planet.

Nature Geoscience↗