Francisco Latosinski | USGS Science

USGS2020

Acoustic Sediment Estimation Toolbox (ASET): A software package for calibrating and processing TRDI ADCP data to compute suspended-sediment transport in sandy rivers

Quantifying suspended-sediment transport is critical for a variety of disciplines related to the management of water resources. However, the number of gauging stations and monitoring networks in most rivers around the world is insufficient to improve understanding of river dynamics and support water resource management decisions. This is mainly due to the high operational costs and intensive labor involved in traditional sediment measurement techniques, especially in sand bed rivers where coarse material varies spatially in the river cross section. Recently, the acoustic surrogate method has received attention as a potentially accurate surrogate technology for estimating suspended-sediment concentrations. In addition, the acoustic surrogate method, through use of acoustic Doppler current profilers (ADCPs), has the advantage of being able to simultaneously measure the flow velocity field and cross-sectional area when moving-boat measurements are performed. In spite of the important advances made in the implementation of this technique, there are no widely-available, free tools for processing the ADCP acoustic signal cross section measurements which include options to extrapolate velocity and sediment in unmeasured ADCP zones and develop calibrations with physical samples. This paper presents a new software called Acoustic Sediment Estimation Toolbox (ASET), which enables the user to develop a calibration between the acoustic signal collected with a down-looking Teledyne RD Instruments ADCP and sediment concentrations determined using traditional sediment sampling techniques. Moreover, ASET software uses dynamic ADCP measurements to estimate the total suspended-sediment transport through a river cross section. The theoretical framework and data processing routines applied by each module in ASET are presented. Finally, a comparison is made between the results obtained by ASET and by traditional methodologies for computing suspended-sediment transport in a large river system (Paraná River, Argentina).

Computers & Geosciences↗

USGS2019

Estimating sand concentrations using ADCP‐based acoustic inversion in a large fluvial system characterized by bi‐modal suspended‐sediment distributions

Quantifying sediment flux within rivers is a challenge for many disciplines due, mainly, to difficulties inherent to traditional sediment sampling methods. These methods are operationally complex, high cost, and high risk. Additionally, the resulting data provide a low spatial and temporal resolution estimate of the total sediment flux, which has impeded advances in the understanding of the hydro‐geomorphic characteristics of rivers. Acoustic technologies have been recognized as a leading tool for increasing the resolution of sediment data by relating their echo intensity level measurements to suspended sediment. Further effort is required to robustly test and develop these techniques across a wide range of conditions found in natural river systems. This article aims to evaluate the application of acoustic inversion techniques using commercially available, down‐looking acoustic Doppler current profilers (ADCPs) in quantifying suspended sediment in a large sand bed river with varying bi‐modal particle size distributions, wash load and suspended‐sand ratios, and water stages. To achieve this objective, suspended sediment was physically sampled along the Paraná River, Argentina, under various hydro‐sedimentological regimes. Two ADCPs emitting different sound frequencies were used to simultaneously profile echo intensity level within the water column. Using the sonar equation, calibrations were determined between suspended‐sand concentrations and acoustic backscatter to solve the inverse problem. The study also analyzed the roles played by each term of the sonar equation, such as ADCP frequency, power supply, instrument constants, and particle size distributions typically found in sand bed rivers, on sediment attenuation and backscatter. Calibrations were successfully developed between corrected backscatter and suspended‐sand concentrations for all sites and ADCP frequencies, resulting in mean suspended‐sand concentration estimates within about 40% of the mean sampled concentrations. Noise values, calculated using the sonar equation and sediment sample characteristics, were fairly constant across evaluations, suggesting that they could be applied to other sand bed rivers.

Earth Surface Processes and Landforms↗