USGS Science⌕ Search

Geology topics

F. H. Olmsted

Publications and source records attributed to F. H. Olmsted.

At least 19 recordsLinked to original sources
USGS1987

Hydrogeologic reconnaissance of the Beowawe Geysers geothermal area, Nevada

The Beowawe Geysers in north-central Nevada are the discharge from a hydrothermal-convection system in a region of high heat flow. The site of thermal-fluid upflow (at about 18 kg/s before drilling and well testing) appears to be related to the intersection at depth of two major fault zones. Assuming steady-state conditions, recharge within the drainage basin could account for both thermal and nonthermal ground-water discharge. Circulation of thermal fluid to depths exceeding 5 km is required to attain estimated temperatures of more than 220°C.

Geothermics↗
USGS1986

Shallow subsurface temperature surveys in the Basin and Range province, U.S.A.-I. Review and evaluation

Temperature surveys at depths of 1–2 m have had varying success in geothermal exploration in the Basin and Range province. The most successful surveys have identified patterns of near-surface thermal-fluid flow within areas of less than 2 km 2 . Results have been less consistent in larger areas where zones of hydrothermal upflow are less well known, nongeothermal perturbing factors are significant and lateral variations in shallow subsurface temperature are small. Nongeothermal perturbations can be minimized by use of mean annual temperatures instead of synoptic temperatures, by physically based simulation of ground temperatures or by statistical modeling.

Geothermics↗
USGS1986

Shallow subsurface temperature surveys in the basin and range province-II. Ground temperatures in the Upsal Hogback geothermal area, west-central Nevada, U.S.A.

Numerous temperature surveys at a depth of 1 m were made in 1973–1985 in the Upsal Hogback and Soda Lakes geothermal areas in west-central Nevada. Whereas the surveys effectively delineated temperature at depth and heat flow within the relatively intense Soda Lakes thermal anomaly, they were not effective at the diffuse Upsal Hogback anomaly, where several perturbing factors that affect shallow subsurface temperatures are exceedingly variable. Albedo is the most important factor in the Upsal Hogback area, even at a depth of 30 m. All possible perturbing factors should be considered when designing a shallow temperature-based prospecting scheme.

Geothermics↗
USGS1984

Geohydrology, aqueous geochemistry, and thermal regime of the Soda Lakes and Upsal Hogback geothermal systems, Churchill County, Nevada

A flow-routing model of the upper Schoharie Creek basin, New York, was developed and used to simulate high flows at the inlet of the Blenheim-Gilboa Reservoir. The flows from Schoharie Creek at Prattsville, the primary source of flow data in the basin, and tributary flows from the six minor basins downstream, are combined and routed along the 9.7 mile reach of the Schoharie Creek between Prattsville and the reservoir inlet. Data from five historic floods were used for model calibration and four for verification. The accuracy of the model as measured by the difference between simulated and observed total flow volumes, is within 14 percent. Results indicate that inflows to the Blenheim-Gilboa Reservoir can be predicted approximately 2 hours in advance. One of the historical floods was chosen for additional model testing to assess a hypothetical real-time model application. Total flow-volume errors ranged from 30.2 percent to -9.2 percent. Alternative methods of obtaining hydrologic data for model input are presented for use in the event that standard forms of hydrologic data are unavailable. (USGS)

Water-Resources Investigations Report↗
USGS1981

The hydrothermal system in southern Grass Valley, Pershing County, Nevada

Southern Grass Valley is typical extensional basin in the Basin and Range province. Leach Hot Springs, in the southern part of the valley, represents the discharge end of an active hydrothermal flow system with an estimated deep aquifer temperature of 163-173C. This report discusses results of geologic, hydrologic, geophysical and geochemical investigations used in an attempt to construct an internally consistent model of the system. (USGS)

Open-File Report↗
USGS1980

Temperature logs of wells and test wells in the Yuma area, Arizona and California

This report consists of 310 temperature logs made in 266 wells and test wells in the Yuma area, Arizona and California during 1963-69. The work was done as part of a geohydrologic study, the results of which are reported in the 1973 U.S. Geological Survey Professional Paper 486-H; Geohydrology of the Yuma Area, Arizona and California, by Olmsted, Loeltz, and Irelan. Most of the logs are plotted from temperatures measured with two Whitney thermistors at depth intervals of 2 to 20 feet in downward succession in each well or test hole, using land surface as datum. A few logs were made with a truck-mounted wireline logger using thermistor probes and continuously recording equipment. All measurements were in degrees Fahrenheit, later converted to degrees Celsius, and were calibrated with a mercury-in-glass thermometer. Accuracy of most of the measurements was + or - 1.0F and precision was about + or - 0.2F. (USGS)

Open-File Report↗
USGS1978

The hydrothermal system of Long Valley Caldera, California

Long Valley caldera, an elliptical depression covering 450 km 2 on the eastern front of the Sierra Nevada in east-central California, contains a hot-water convection system with numerous hot springs and measured and estimated aquifer temperatures at depths of 180?C to 280?C. In this study we have synthesized the results of previous geologic, geophysical, geochemical, and hydrologic investigations of the Long Valley area to develop a generalized conceptual and mathematical model which describes the gross features of heat and fluid flow in the hydrothermal system. Cenozoic volcanism in the Long Valley region began about 3.2 m.y. (million years) ago and has continued intermittently until the present time. The major event that resulted in the formation of the Long Valley caldera took place about 0.7 m.y. ago with the eruption of 600 km 3 or more of Bishop Tuff of Pleistocene age, a rhyolitic ash flow, and subsequent collapse of the roof of the magma chamber along one or more steeply inclined ring fractures. Subsequent intracaldera volcanism and uplift of the west-central part of the caldera floor formed a subcircular resurgent dome about 10 km in diameter surrounded by a moat containing rhyolitic, rhyodacitic, and basaltic rocks ranging in age from 0.5 to 0.05 m.y. On the basis of gravity and seismic studies, we estimate an aver- age thickness of fill of 2.4 km above the precaldera granitic and metamorphic basement rocks. A continuous layer of densely welded Bishop Tuff overlies the basement rocks, with an average thickness of 1.4 km; the fill above the welded Bishop Tuff consists of intercalated volcanic flows and tuffs and fluvial and lacustrine deposits. Assuming the average grain density of the fill is between 2.45 and 2.65 g/cm 3 , we calculate the average bulk porosity of the total fill as from 0.11 to 0.21. Comparison of published values of porosity of the welded Bishop Tuff exposed southeast of the caldera with calculated values indicates average bulk porosity for the welded tuff (including fracture porosity) from 0.05 to 0.10. Because of its continuity and depth and the likelihood of significant fracture permeability in the more competent rocks such as the welded tuff, our model of the hydrothermal system assumes that the Bishop Tuff provides the principal hot-water reservoir. However, because very little direct information exists from drill holes below 300 m, this assumption must be considered tentative. Long Valley caldera is drained by the Owens River and several tributaries which flow into Lake Crowley in the southeast end of the caldera. Streamflow and springflow measurements for water years 1964-74 indicate a total inflow to Lake Crowley of about 10,900 L/s. In contrast, the total discharge of hot water from the hydrothermal reservoir is about 300 L/s. For modeling purposes, the ground-water system is considered as comprising a shallow subsystem in the fill above the densely welded Bishop Tuff containing relatively cold ground water, and a deep subsystem or hydrothermal reservoir in the welded tuff containing relatively hot ground water. Hydrologic, isotopic, and thermal data indicate that recharge to the hydrothermal reservoir occurs in the upper Owens River drainage basin along the western periphery of the caldera. Temperature profiles in a 2.11- km-deep test well drilled by private industry in the southeastern part of the caldera suggest that an additional flux of relatively cool ground water recharges the deep subsystem around the northeast rim. Flow in the shallow ground-water subsystem is neglected in the model except in recharge areas and along Hot Creek gorge, where approximately 80 percent of the hot-water discharge from the hydrothermal reservoir moves upward along faults toward springs in the gorge. Heat-flow data from the Long Valley region indicate that the resurgent dome overlies a residual magma chamber more circular in plan than the original magma chamber that supplied the Bishop Tuff

California↗
USGS1975

Preliminary hydrogeologic appraisal of selected hydrothermal systems in northern and central Nevada

Several hydrothermal systems in northern and central Nevada were explored in a hydrogeologic reconnaissance. The systems studied comprise those at Stillwater and Soda Lakes-Upsal Hogback in the Carson Desert, Gerlach, Fly Ranch-Granite Range, and Double Hot Springs in the Black Rock Desert, Brady's Hot Springs, Leach Hot Springs in Grass Valley, Buffalo Valley Hot Springs, and Sulphur Hot Springs in Ruby Valley. The investigation focused on (1) delineating of areas of high heat flow associated with rising thermal ground water, (2) determining the nature of the discharge parts of the hydrothermal systems, (3) estimating heat discharge from the systems, (4) estimating water discharge from the systems, (5) obtaining rough estimates of, conductive heat flow outside areas of hydrothermal discharge, and (6) evaluating several investigative techniques that would yield the required information quickly and at relatively low cost. The most useful techniques were shallow test drilling to obtain geologic, hydraulic, and thermal data and hydrogeologic mapping of the discharge areas. The systems studied are in the north-central part of the Basin and Range province. Exposed volcanic rocks of latest Tertiary and Quaternary age are chiefly basaltic. Basaltic terranes are generally regarded as less favorable for geothermal resources than terranes that contain large volumes of young volcanic mocks of felsic to intermediate composition. Most of the known hydrothermal systems are associated with Basin and Range faults which are caused by crustal extension across the province. An area of high heat flow centered at Battle Mountain and possibly other areas of high heat flow may be related to crustal heat sources. However, some of the hydrothermal systems studied appear to be related to deep circulation of meteoric water in areas of 'normal' regional heat flow rather than to shallow-crustal heat sources. Discharge temperatures of thermal springs in the region range from slightly above mean annual air temperature (8?-12?C at most places) to boiling or slightly hotter. Geochemical data indicate that, in the major systems, subsurface temperatures at which thermal waters equilibrate with reservoir rocks range from 150? to more than 200?C. These data also indicate that the major systems are of the hot-water type rather than the vapor-dominated type. Depths of thermal-water circulation probably range from 2 to 6 kilometres in areas of 'normal' regional heat flow (~2 heatflow units) and from 1 to 3 kilometres in areas of high heat flow (~3-4 heat-flow units) such as near Battle Mountain. Most of the heat is discharged from the hydrothermal systems studied by (1) conduction through near-surface materials heated as a consequence of thermal-water convection, (2) convection as springflow, and (3) convection as steam discharge from spring pools, vents, fumaroles, and cracks. The mate of heat discharge by radiation from warm ground and by convection as lateral ground-water outflow is believed to be small in most systems and is not estimated. Estimates of net heat discharge from the systems studied range from about 0.8 x 106 calories per second at Buffalo Valley Hot Springs to about 14 x 106 calories per second at Stillwater. These estimates represent the approximate magnitude of the excess heat discharge from the thermal areas that results from the upward convection of hot water from deep sources. Water discharges from the hydrothermal systems by springflow, evapotranspiration, steam discharge, and lateral ground-water outflow. Estimated discharges range from about 0.2 x 106cubic metres per year from the Buffalo Valley Hot Springs system to about 3 x 106 cubic metres per year from the Stillwater system. In most of the hydrothermal systems studied and, by inference, in other similar systems in northern and central Nevada, the scale for potential .commercial development for production of electricity or for other uses may be constrained by the

Open-File Report↗
USGS1963

Some relations between streamflow characteristics and the environment in the Delaware River region

Streamflow characteristics are determined by a large number of factors of the meteorological and terrestrial environments. Because of lack of quantitative data to describe some of the factors and complex interrelations among them, complete analysis of the relations between streamflow and the various environmental factors is impossible. However, certain simplifying assumptions and generalizations made possible a partial analysis for the Delaware River region. For relations involving average runoff or low-flow parameters, average annual precipitation was assumed to be the principal meteorological factor, and geology (a complex of many factors) was assumed to be the principal terrestrial influence, except for that of basin size which was largely eliminated by expression of discharge in terms of unit area. As a first approximation, physiographic units were used as a basis for classifying the geology. Relations between flow parameters and precipitation are fairly well defined for some physiographic units, but not for those in which the geology varies markedly or the areal variation in average precipitation is very small. These relations provide a basis for adjusting the flow parameters to reduce or eliminate the effects of areal variations in precipitation and increase their significance in studies of the effects of terrestrial characteristics. An investigation of the residual effect of basin size (the effect remaining when discharge is expressed in terms of unit area) on relations between flow parameters and average precipitation indicates that such effect is negligible, except for very large differences in area. Parameters that are derived from base-flow recession curves and are related to a common discharge per unit area have inherent advantages as indicators of effects of terrestrial characteristics of basins, because the.y are independent of areal variations in average annual precipitation. Winter base-flow parameters are also practically independent of the effects of evapotranspiration from ground water. However, in many parts of the region these advantages are reduced or nullified by the difficulties of defining base-flow recession curves, particularly winter curves, with sufficient accuracy. In the absence of suitable base-flow recession data and a suitable basis for adjusting parameters, the ratio of the discharge equaled or exceeded 90 percent of the time to the average discharge (Qtt/Qa), or a similar duration parameter, probably is the best indicator of the influence of terrestrial characteristics, although the ratio may vary somewhat with average precipitation. In a part of the region where geologic differences are large and areal variations in average precipitation are small, values of Qm/Qa for each major geologic unit were determined from streamflow records. From these values and the percentage of area represented by each unit, a ratio for each gaging station was computed. Comparison of these computed results with the observed results indicates that nearly all of the variation in the ratio is associated with variation in geology. The investigation indicates that the original assumptions are correct; average precipitation is the principal meteorological influence and geology is the principal terrestrial influence. Together these two factors account for a very large proportion of the variation in average runoff and low-flow characteristics.

Delaware, New Jersey, Pennsylvania↗