Geology topics

Edward C. Jones

Publications and source records attributed to Edward C. Jones.

7 recordsLinked to original sources

USGS2019

Application of the Stream Salmonid Simulator (S3) to Klamath River fall Chinook salmon (Oncorhynchus tshawytscha), California—Parameterization and calibration

Executive Summary In this report, we describe application of the Stream Salmonid Simulator (S3) to Chinook salmon ( Oncorhynchus tshawytscha ) in the Klamath River between Keno Dam in southern Oregon and the ocean in northern California. S3 is a deterministic life-stage-structured population model that tracks daily growth, movement, and survival of juvenile salmon. It can track different source populations or species, such as major tributary populations that enter a river like the Klamath River. A key theme of the model is that river flow affects habitat availability and capacity, which in turn drives density-dependent population dynamics. To explicitly link population dynamics to habitat quality and quantity, the river environment is constructed as a one-dimensional series of linked habitat units, each of which has an associated daily time series of discharge, water temperature, and useable habitat area or carrying capacity. In turn, the physical characteristics of each habitat unit and the number of fish occupying each unit affect survival and growth within each habitat unit and movement of fish among habitat units. The physical template of the Klamath River was formed by classifying the river into 2,635 mesohabitat units composed of runs, riffles, and pools. This template enabled modeling of the unimpounded Klamath River between the Keno Dam (the uppermost of four dams) and Iron Gate Dam (the lowermost dam) to address dam-removal scenarios. However, in this report, our focus was on parameterizing and calibrating the model under existing conditions, which included 1,706 discrete habitat units over the 312-kilometer (km) section of river between Iron Gate Dam and the ocean. For each habitat unit, we developed a time series of daily flow, water temperature, and amount of available habitat (weighted usable habitat area [WUA]) for spawners, fry, and parr. WUA time series were constructed using habitat suitability criteria for Chinook salmon applied to eight two-dimensional (2-D) hydrodynamic models that represented the geomorphic variability in habitat across the Klamath River. Results from the 2-D models were then extrapolated to unmodeled habitat units by scaling WUA curves for changes in habitat unit length and width. These variables were then used to drive population dynamics such as egg development and survival and juvenile movement, growth, and survival.

California, Oregon↗

USGS2018

Application of the Stream Salmonid Simulator (S3) to the restoration reach of the Trinity River, California—Parameterization and calibration

Executive Summary In this report, we constructed and parameterized the Stream Salmonid Simulator (S3) for the 64-kilometer “Restoration Reach” of the Trinity River, just downstream of Lewiston Dam in northern California. S3 is a deterministic life-stage-structured population model that tracks daily growth, movement, and survival of juvenile salmon. A key theme of the model is that river flow affects habitat availability and capacity, which in turn drives density-dependent population dynamics. To explicitly link population dynamics to habitat quality and quantity, the river environment is constructed as a one-dimensional series of linked habitat units, each of which has an associated daily timeseries of discharge, water temperature, and useable habitat area or carrying capacity. In turn, the physical characteristics of each habitat unit and the number of fish occupying each unit drive survival and growth within each habitat unit and movement of fish among habitat units. The physical template of the Restoration Reach was formed by classifying the river into 356 meso-habitat units comprised of runs, riffles, and pools. For each habitat unit, we developed a timeseries of daily flow, water temperature, amount of available spawning habitat, and fry and parr carrying capacity. Capacity timeseries were constructed using state-of-the-art models of spatially explicit hydrodynamics and quantitative fish habitat relationships developed for the Trinity River. These variables were then used to drive population dynamics such as egg growth and survival and juvenile movement, growth, and survival.

California↗

USGS2018

Model structure of the stream salmonid simulator (S3)—A dynamic model for simulating growth, movement, and survival of juvenile salmonids

Fisheries and water managers often use population models to aid in understanding the effect of alternative water management or restoration actions on anadromous fish populations. We developed the Stream Salmonid Simulator (S3) to help resource managers evaluate the effect of management alternatives on juvenile salmonid populations. S3 is a deterministic stage-structured population model that tracks daily growth, movement, and survival of juvenile salmon. A key theme of the model is that river flow affects habitat availability and capacity, which in turn drives density dependent population dynamics. To explicitly link population dynamics to habitat quality and quantity, the river environment is constructed as a one-dimensional series of linked habitat units, each of which has an associated daily time series of discharge, water temperature, and usable habitat area or carrying capacity. The physical characteristics of each habitat unit and the number of fish occupying each unit, in turn, drive survival and growth within each habitat unit and movement of fish among habitat units. The purpose of this report is to outline the underlying general structure of the S3 model that is common among different applications of the model. We have developed applications of the S3 model for juvenile fall Chinook salmon ( Oncorhynchus tshawytscha ) in the lower Klamath River. Thus, this report is a companion to current application of the S3 model to the Trinity River (in review). The general S3 model structure provides a biological and physical framework for the salmonid freshwater life cycle. This framework captures important demographics of juvenile salmonids aimed at translating management alternatives into simulated population responses. Although the S3 model is built on this common framework, the model has been constructed to allow much flexibility in application of the model to specific river systems. The ability for practitioners to include system-specific information for the physical stream structure, survival, growth, and movement processes ensures that simulations provide results that are relevant to the questions asked about the population under study.

Open-File Report↗

USGS2018

N-mix for fish: estimating riverine salmonid habitat selection via N-mixture models

Models that formulate mathematical linkages between fish use and habitat characteristics are applied for many purposes. For riverine fish, these linkages are often cast as resource selection functions with variables including depth and velocity of water and distance to nearest cover. Ecologists are now recognizing the role that detection plays in observing organisms, and failure to account for imperfect detection can lead to spurious inference. Herein, we present a flexible N-mixture model to associate habitat characteristics with the abundance of riverine salmonids that simultaneously estimates detection probability. Our formulation has the added benefits of accounting for demographics variation and can generate probabilistic statements regarding intensity of habitat use. In addition to the conceptual benefits, model application to data from the Trinity River, California, yields interesting results. Detection was estimated to vary among surveyors, but there was little spatial or temporal variation. Additionally, a weaker effect of water depth on resource selection is estimated than that reported by previous studies not accounting for detection probability. N-mixture models show great promise for applications to riverine resource selection.

Canadian Journal of Fisheries and Aquatic Sciences↗

USGS2018

Estimation of stream conditions in tributaries of the Klamath River, northern California

Because of their critical ecological role, stream temperature and discharge are requisite inputs for models of salmonid population dynamics. Coho Salmon inhabiting the Klamath Basin spend much of their freshwater life cycle inhabiting tributaries, but environmental data are often absent or only seasonally available at these locations. To address this information gap, we constructed daily averaged water temperature models that used simulated meteorological data to estimate daily tributary temperatures, and we used flow differentials recorded on the mainstem Klamath River to estimate daily tributary discharge. Observed temperature data were available for fourteen of the major salmon bearing tributaries, which enabled estimation of tributary-specific model parameters at those locations. Water temperature data from six mid-Klamath Basin tributaries were used to estimate a global set of parameters for predicting water temperatures in the remaining tributaries. The resulting parameter sets were used to simulate water temperatures for each of 75 tributaries from 1980-2015. Goodness-of-fit statistics computed from a cross-validation analysis demonstrated a high precision of the tributary-specific models in predicting temperature in unobserved years and of the global model in predicting temperatures in unobserved streams. Klamath River discharge has been monitored by four gages that broadly intersperse the 292 kilometers from the Iron Gate Dam to the Klamath River mouth. These gages defined the upstream and downstream margins of three reaches. Daily discharge of tributaries within a reach was estimated from 1980-2015 based on drainage-area proportionate allocations of the discharge differential between the upstream and downstream margin. Comparisons with measured discharge on Indian Creek, a moderate-sized tributary with naturally regulated flows, revealed that the estimates effectively approximated both the variability and magnitude of discharge.

California↗

USGS2016

Construction, calibration, and validation of the RBM10 water temperature model for the Trinity River, northern California

We constructed a one-dimensional daily averaged water-temperature model to simulate Trinity River temperatures for 1980–2013. The purpose of this model is to assess effects of water-management actions on water temperature and to provide water temperature inputs for a salmon population dynamics model. Simulated meteorological data, observed streamflow data, and observed water temperatures were used as model inputs to simulate a continuous 34-year time series of historical daily mean water temperature at eight locations along 112.2 river miles from Lewiston Dam near Weaverville, California, downstream to the Klamath River confluence. To demonstrate the utility of the model to inform management actions, we simulated three management alternatives to assess the effects of bypass flow augmentation in a drought year, 1994, and compared those results to the simulated historical baseline, referred to as the “No Action” alternative scenario. Augmentation flows from the Lewiston Dam bypass consist of temperature-controlled releases capable of cooling downstream water temperatures in hot times of the year, which can reduce the probability of disease outbreaks in fish populations. Outputs from the Trinity River water-temperature model were then used as inputs to an existing water-temperature model of the Klamath River to evaluate the effect of augmentation flow releases on water temperatures in the lower Klamath River. We structured the Trinity River water-temperature model in River Basin Model-10 (RBM10), which uses a simple equilibrium flow model, assuming discharge in each river segment on each day is transmitted downstream instantaneously. The model uses a heat-budget formulation to quantify heat flux at the air-water interface. Inputs for the heat budget are calculated from daily mean meteorological data, including net shortwave solar radiation, net longwave atmospheric radiation, air temperature, wind speed, vapor pressure, and a psychrometric constant needed to calculate the Bowen ratio. The modeling domain was divided into eight reaches ranging in length from 8.8 to 20.6 miles, which were calibrated and validated separately with observed water temperature data collected irregularly from 1980 to 2013. Root mean square errors of observed and simulated water temperatures for the eight reaches ranged from 0.25 to 1.12 degrees Celsius (°C). Mean absolute errors ranged from 0.18 to 0.89 °C. For model validation, a k -fold cross-validation technique was used. Validation root mean square error and mean absolute error for the eight reaches ranged from 0.24 to 1.11 °C and from 0.18 to 0.89 °C, respectively. Augmentation scenarios were based on historical hydrological and meteorological data, combined with prescribed flow and temperature releases from Lewiston Dam provided by the Bureau of Reclamation. Water releases were scheduled to achieve targeted flows of 2,500, 2,800, and 3,200 cubic feet per second in the lower Klamath River from mid-August through late September, coinciding with the upstream migration of adult fall-run Chinook salmon ( Oncorhynchus tshawytscha ). Water temperatures simulated at river mile 5.7 on the Klamath River showed a 5 °C decrease from the No Action historical baseline, which was near or greater than 23 °C when augmentation began in mid-August. Thereafter, an approximate 1 °C difference among augmentation scenarios emerged, with the decrease in water temperature commensurate to the level of augmentation. All augmentation scenarios simulated water temperatures equal to or less than 21 °C from mid-August through late September. Water temperatures equal to or greater than 23 °C are of particular interest because of a thermal threshold known to inhibit upstream migration of salmon. When temperatures exceed this approximate 23 °C threshold, Chinook salmon are known to congregate in high densities in thermal refugias and show extended residence times, which can potentially trigger epizootic outbreaks such as of Ichthyophthirius multifiliis (“Ich”) and Flavobacterium columnare (“Columnaris”) that were the causative factors of the Klamath River fish kill in 2002. A model with the ability to simulate water temperatures in response to management actions at the basin scale is a valuable asset for water managers who must make decisions about how best to use limited water resources, which directly affect the state of fisheries in the Klamath Basin.

California↗

USGS2011

Simulating daily water temperatures of the Klamath River under dam removal and climate change scenarios

A one-dimensional daily averaged water temperature model was used to simulate Klamath River temperatures for two management alternatives under historical climate conditions and six future climate scenarios. The analysis was conducted for the Secretarial Determination on removal of four hydroelectric dams on the Klamath River. In 2012, the Secretary of the Interior will determine if dam removal and implementation of the Klamath Basin Restoration Agreement (KBRA) (Klamath Basin Restoration Agreement, 2010) will advance restoration of salmonid fisheries and is in the public interest. If the Secretary decides dam removal is appropriate, then the four dams are scheduled for removal in 2020. Water temperature simulations were conducted to compare the effect of two management alternatives: the no-action alternative where dams remain in place, and the action alternative where dam removal occurs in 2020 along with habitat restoration. Each management alternative was simulated under historical climate conditions (1961-2010) and six 50-year (2012-2061) climate scenarios. The model selected for the study, River Basin Model-10 (RBM10), was used to simulate water temperatures over a 253-mile reach of the Klamath River located in south-central Oregon and northern California. RBM10 uses a simple equilibrium flow model, assuming discharge in each river segment on each day is transmitted downstream instantaneously. The model uses a heat budget formulation to quantify heat flux at the air-water interface. Inputs for the heat budget were calculated from daily-mean meteorological data, including net shortwave solar radiation, net longwave atmospheric radiation, air temperature, wind speed, vapor pressure, and a psychrometric constant needed to calculate the Bowen ratio. The modeling domain was divided into nine reaches ranging in length from 10.8 to 42.4 miles, which were calibrated and validated separately with measured water temperature data collected irregularly from 1961 to 2010. Calibration root mean square errors of observed versus simulated water temperatures for the nine reaches ranged from 0.8 to 1.5 degrees C. Mean absolute errors ranged from 0.6 to 1.2 degrees C. For model validation, a k-fold cross-validation technique was used. Validation root mean square error and mean absolute error for the nine reaches ranged from 0.8 to 1.4 degrees C and 0.8 to 1.2 degrees C, respectively. Input data for the six future climate scenarios (2012-2061) were derived from historical hydrological and meteorological data and simulated meteorological output from five Global Circulation Models. Total Maximum Daily Loads or other regulatory processes that might reduce future water temperatures were not included in the simulations. Under the current climate conditions scenario, impacts of dam removal on water temperatures were greatest near Iron Gate Dam (near Yreka, California) and were attenuated in the lower reaches of the Klamath River. May and October simulated mean water temperatures increased and decreased by approximately 1-2 degrees C and 2-4 degrees C, respectively, downstream of Iron Gate Dam after dam removal. Dam removal also resulted in an earlier annual temperature cycle shift of 18 days, 5 days, and 2 days, near Iron Gate Dam, Scott River, and Trinity River, respectively. Although the magnitude of precipitation and air temperature change predicted by the five Global Circulation Models varied, all five models resulted in progressive incremental increases in water temperatures with each decade from 2012 to 2061. However, dam removal under KBRA appeared to delay the effects of climate change to some extent near Iron Gate Dam. With dam removal under KBRA, annual-mean water temperatures exceeded the 49-year historical mean temperature beginning in 2045; whereas with dams, annual-mean temperatures exceeded the historical mean beginning in 2025. Potential changes in seasonal water temperatures resulting from dam removal, with or without future climat

Open-File Report↗