Geology topics

E.L. Usery

Publications and source records attributed to E.L. Usery.

13 recordsLinked to original sources

USGS2013

Effects of sampling interval on spatial patterns and statistics of watershed nitrogen concentration

This study investigates how spatial patterns and statistics of a 30 m resolution, model-simulated, watershed nitrogen concentration surface change with sampling intervals from 30 m to 600 m for every 30 m increase for the Little River Watershed (Georgia, USA). The results indicate that the mean, standard deviation, and variogram sills do not have consistent trends with increasing sampling intervals, whereas the variogram ranges remain constant. A sampling interval smaller than or equal to 90 m is necessary to build a representative variogram. The interpolation accuracy, clustering level, and total hot spot areas show decreasing trends approximating a logarithmic function. The trends correspond to the nitrogen variogram and start to level at a sampling interval of 360 m, which is therefore regarded as a critical spatial scale of the Little River Watershed. Copyright ?? 2009 by Bellwether Publishing, Ltd. All right reserved.

GIScience and Remote Sensing↗

USGS2009

GIS applications for military operations in coastal zones

In order to successfully support current and future US military operations in coastal zones, geospatial information must be rapidly integrated and analyzed to meet ongoing force structure evolution and new mission directives. Coastal zones in a military-operational environment are complex regions that include sea, land and air features that demand high-volume databases of extreme detail within relatively narrow geographic corridors. Static products in the form of analog maps at varying scales traditionally have been used by military commanders and their operational planners. The rapidly changing battlefield of 21st Century warfare, however, demands dynamic mapping solutions. Commercial geographic information system (GIS) software for military-specific applications is now being developed and employed with digital databases to provide customized digital maps of variable scale, content and symbolization tailored to unique demands of military units. Research conducted by the Center for Remote Sensing and Mapping Science at the University of Georgia demonstrated the utility of GIS-based analysis and digital map creation when developing large-scale (1:10,000) products from littoral warfare databases. The methodology employed-selection of data sources (including high resolution commercial images and Lidar), establishment of analysis/modeling parameters, conduct of vehicle mobility analysis, development of models and generation of products (such as a continuous sea-land DEM and geo-visualization of changing shorelines with tidal levels)-is discussed. Based on observations and identified needs from the National Geospatial-Intelligence Agency, formerly the National Imagery and Mapping Agency, and the Department of Defense, prototype GIS models for military operations in sea, land and air environments were created from multiple data sets of a study area at US Marine Corps Base Camp Lejeune, North Carolina. Results of these models, along with methodologies for developing large-scale littoral warfare databases, aid the National Geospatial-Intelligence Agency in meeting littoral warfare analysis, modeling and map generation requirements for US military organizations. ?? 2008 International Society for Photogrammetry and Remote Sensing, Inc. (ISPRS).

ISPRS Journal of Photogrammetry and Remote Sensing↗

USGS2009

Using geometrical, textural, and contextual information of land parcels for classification of detailed urban land use

Detailed urban land use data are important to government officials, researchers, and businesspeople for a variety of purposes. This article presents an approach to classifying detailed urban land use based on geometrical, textural, and contextual information of land parcels. An area of 6 by 14 km in Austin, Texas, with land parcel boundaries delineated by the Travis Central Appraisal District of Travis County, Texas, is tested for the approach. We derive fifty parcel attributes from relevant geographic information system (GIS) and remote sensing data and use them to discriminate among nine urban land uses: single family, multifamily, commercial, office, industrial, civic, open space, transportation, and undeveloped. Half of the 33,025 parcels in the study area are used as training data for land use classification and the other half are used as testing data for accuracy assessment. The best result with a decision tree classification algorithm has an overall accuracy of 96 percent and a kappa coefficient of 0.78, and two naive, baseline models based on the majority rule and the spatial autocorrelation rule have overall accuracy of 89 percent and 79 percent, respectively. The algorithm is relatively good at classifying single-family, multifamily, commercial, open space, and undeveloped land uses and relatively poor at classifying office, industrial, civic, and transportation land uses. The most important attributes for land use classification are the geometrical attributes, particularly those related to building areas. Next are the contextual attributes, particularly those relevant to the spatial relationship between buildings, then the textural attributes, particularly the semivariance texture statistic from 0.61-m resolution images.

Annals of the Association of American Geographers↗

USGS2009

A prototype feature system for feature retrieval using relationships

Using a feature data model, geographic phenomena can be represented effectively by integrating space, theme, and time. This paper extends and implements a feature data model that supports query and visualization of geographic features using their non-spatial and temporal relationships. A prototype feature-oriented geographic information system (FOGIS) is then developed and storage of features named Feature Database is designed. Buildings from the U.S. Marine Corps Base, Camp Lejeune, North Carolina and subways in Chicago, Illinois are used to test the developed system. The results of the applications show the strength of the feature data model and the developed system 'FOGIS' when they utilize non-spatial and temporal relationships in order to retrieve and visualize individual features.

Cartography and Geographic Information Science↗

USGS2009

Data layer integration for the national map of the united states

The integration of geographic data layers in multiple raster and vector formats, from many different organizations and at a variety of resolutions and scales, is a significant problem for The National Map of the United States being developed by the U.S. Geological Survey. Our research has examined data integration from a layer-based approach for five of The National Map data layers: digital orthoimages, elevation, land cover, hydrography, and transportation. An empirical approach has included visual assessment by a set of respondents with statistical analysis to establish the meaning of various types of integration. A separate theoretical approach with established hypotheses tested against actual data sets has resulted in an automated procedure for integration of specific layers and is being tested. The empirical analysis has established resolution bounds on meanings of integration with raster datasets and distance bounds for vector data. The theoretical approach has used a combination of theories on cartographic transformation and generalization, such as T??pfer's radical law, and additional research concerning optimum viewing scales for digital images to establish a set of guiding principles for integrating data of different resolutions.

Cartographic Perspectives↗

USGS2008

Effects of spatial resolution ratio in image fusion

In image fusion, the spatial resolution ratio can be defined as the ratio between the spatial resolution of the high-resolution panchromatic image and that of the low-resolution multispectral image. This paper attempts to assess the effects of the spatial resolution ratio of the input images on the quality of the fused image. Experimental results indicate that a spatial resolution ratio of 1:10 or higher is desired for optimal multisensor image fusion provided the input panchromatic image is not downsampled to a coarser resolution. Due to the synthetic pixels generated from resampling, the quality of the fused image decreases as the spatial resolution ratio decreases (e.g. from 1:10 to 1:30). However, even with a spatial resolution ratio as small as 1:30, the quality of the fused image is still better than the original multispectral image alone for feature interpretation. In cases where the spatial resolution ratio is too small (e.g. 1:30), to obtain better spectral integrity of the fused image, one may downsample the input high-resolution panchromatic image to a slightly lower resolution before fusing it with the multispectral image.

International Journal of Remote Sensing↗

USGS2008

An assessment of the effects of cell size on AGNPS modeling of watershed runoff

This study investigates the changes in simulated watershed runoff from the Agricultural NonPoint Source (AGNPS) pollution model as a function of model input cell size resolution for eight different cell sizes (30 m, 60 m, 120 m, 210 m, 240 m, 480 m, 960 m, and 1920 m) for the Little River Watershed (Georgia, USA). Overland cell runoff (area-weighted cell runoff), total runoff volume, clustering statistics, and hot spot patterns were examined for the different cell sizes and trends identified. Total runoff volumes decreased with increasing cell size. Using data sets of 210-m cell size or smaller in conjunction with a representative watershed boundary allows one to model the runoff volumes within 0.2 percent accuracy. The runoff clustering statistics decrease with increasing cell size; a cell size of 960 m or smaller is necessary to indicate significant high-runoff clustering. Runoff hot spot areas have a decreasing trend with increasing cell size; a cell size of 240 m or smaller is required to detect important hot spots. Conclusions regarding cell size effects on runoff estimation cannot be applied to local watershed areas due to the inconsistent changes of runoff volume with cell size; but, optimal cells sizes for clustering and hot spot analyses are applicable to local watershed areas due to the consistent trends.

Cartography and Geographic Information Science↗

USGS2007

Innovations in individual feature history management - The significance of feature-based temporal model

A feature relies on three dimensions (space, theme, and time) for its representation. Even though spatiotemporal models have been proposed, they have principally focused on the spatial changes of a feature. In this paper, a feature-based temporal model is proposed to represent the changes of both space and theme independently. The proposed model modifies the ISO's temporal schema and adds new explicit temporal relationship structure that stores temporal topological relationship with the ISO's temporal primitives of a feature in order to keep track feature history. The explicit temporal relationship can enhance query performance on feature history by removing topological comparison during query process. Further, a prototype system has been developed to test a proposed feature-based temporal model by querying land parcel history in Athens, Georgia. The result of temporal query on individual feature history shows the efficiency of the explicit temporal relationship structure. ?? Springer Science+Business Media, LLC 2007.

GeoInformatica↗

USGS2007

FFT-enhanced IHS transform method for fusing high-resolution satellite images

Existing image fusion techniques such as the intensity-hue-saturation (IHS) transform and principal components analysis (PCA) methods may not be optimal for fusing the new generation commercial high-resolution satellite images such as Ikonos and QuickBird. One problem is color distortion in the fused image, which causes visual changes as well as spectral differences between the original and fused images. In this paper, a fast Fourier transform (FFT)-enhanced IHS method is developed for fusing new generation high-resolution satellite images. This method combines a standard IHS transform with FFT filtering of both the panchromatic image and the intensity component of the original multispectral image. Ikonos and QuickBird data are used to assess the FFT-enhanced IHS transform method. Experimental results indicate that the FFT-enhanced IHS transform method may improve upon the standard IHS transform and the PCA methods in preserving spectral and spatial information. ?? 2006 International Society for Photogrammetry and Remote Sensing, Inc. (ISPRS).

ISPRS Journal of Photogrammetry and Remote Sensing↗

USGS2006

Automatic alignment of vector data and orthoimagery for the national map

A general problem in combining road vector data with orthoimagery from different sources is that they rarely align. There are a variety of causes to this problem, but the most common one is that the latest products are collected with higher accuracy and improved processing techniques. In previous work, we developed techniques to automatically correct the alignment of vector data with orthoimagery using a technique called conflation. However, in applying our technique to real-world datasets provided by USGS, we discovered that these techniques failed in some areas. In this paper, we describe some refinements to our original approach that provide consistently better results in aligning the vector data with the orthoimagery.

Conference Paper↗

USGS2004

Geospatial data resampling and resolution effects on watershed modeling: A case study using the agricultural non-point source pollution model

Researchers have been coupling geographic information systems (GIS) data handling and processing capability to watershed and waterquality models for many years. This capability is suited for the development of databases appropriate for water modeling. However, it is rare for GIS to provide direct inputs to the models. To demonstrate the logical procedure of coupling GIS for model parameter extraction, we selected the Agricultural Non-Point Source (AGNPS) pollution model. Investigators can generate data layers at various resolutions and resample to pixel sizes to support models at particular scales. We developed databases of elevation, land cover, and soils at various resolutions in four watersheds. The ability to use multiresolution databases for the generation of model parameters is problematic for grid-based models. We used database development procedures and observed the effects of resolution and resampling on GIS input datasets and parameters generated from those inputs for AGNPS. Results indicate that elevation values at specific points compare favorably between 3- and 30-m raster datasets. Categorical data analysis indicates that land cover classes vary significantly. Derived parameters parallel the results of the base GIS datasets. Analysis of data resampled from 30-m to 60-, 120-, 210-, 240-, 480-, 960-, and 1920-m pixels indicates a general degradation of both elevation and land cover correlations as resolution decreases. Initial evaluation of model output values for soluble nitrogen and phosphorous indicates similar degradation with resolution. ?? Springer-Verlag 2004.

Journal of Geographical Systems↗

USGS2003

Projecting global datasets to achieve equal areas

Scientists routinely accomplish global modeling in the raster domain, but recent research has indicated that the transformation of large areas through map projection equations leads to errors. This research attempts to gauge the extent of map projection and resampling effects on the tabulation of categorical areas by comparing the results of three datasets for seven common projections. The datasets, Global Land Cover, Holdridge Life Zones, and Global Vegetation, were compiled at resolutions of 30 arc-second, 1/2 degree, and 1 degree, respectively. These datasets were projected globally from spherical coordinates to plane representations. Results indicate significant problems in the implementation of global projection transformations in commercial software, as well as differences in areal accuracy across projections. The level of raster resolution directly affects the accuracy of areal tabulations, with higher resolution yielding higher accuracy. If the raster resolution is high enough for individual pixels to approximate points, the areal error tends to zero. The 30-arc-second cells appear to approximate this condition.

Cartography and Geographic Information Science↗

USGS2002

Methods to achieve accurate projection of regional and global raster databases

This research aims at building a decision support system (DSS) for selecting an optimum projection considering various factors, such as pixel size, areal extent, number of categories, spatial pattern of categories, resampling methods, and error correction methods. Specifically, this research will investigate three goals theoretically and empirically and, using the already developed empirical base of knowledge with these results, develop an expert system for map projection of raster data for regional and global database modeling. The three theoretical goals are as follows: (1) The development of a dynamic projection that adjusts projection formulas for latitude on the basis of raster cell size to maintain equal-sized cells. (2) The investigation of the relationships between the raster representation and the distortion of features, number of categories, and spatial pattern. (3) The development of an error correction and resampling procedure that is based on error analysis of raster projection.

Open-File Report↗