USGS Science⌕ Search

Geology topics

E.A. Merewether

Publications and source records attributed to E.A. Merewether.

At least 19 recordsLinked to original sources
USGS2011

Biostratigraphic data from Upper Cretaceous formations-eastern Wyoming, central Colorado, and northeastern New Mexico

Lithological and paleontological studies of outcrops of Upper Cretaceous formations were conducted at 12 localities in eastern Wyoming, central Colorado, and northeastern New Mexico. The sequence extends upward from the top of the Mowry Shale, or age-equivalent rocks, through the Graneros Shale, Greenhorn Limestone, Carlile Shale, Niobrara Formation, Pierre Shale, and Fox Hills Sandstone, or age-equivalent formations, to the top of the Laramie Formation, or laterally equivalent formations. The strata are mainly siliciclastic and calcareous, with thicknesses ranging from about 3,300 ft in northeastern New Mexico to as much as 13,500 ft in eastern Wyoming. Deposition was mainly in marine environments and molluscan fossils of Cenomanian through Maastrichtian ages are common. Radiometric ages were determined from beds of bentonite that are associated with fossil zones. The Upper Cretaceous formations at the 12 study localities are herein divided into three informal time-stratigraphic units based on fossil content and contact relations with adjacent strata. The basal unit in most places extends from the base of the Graneros to the top of the Niobrara, generally to the horizon of the fossil Scaphites hippocrepis, and spans a period of about 14 million years. The middle unit generally extends from the top of the Niobrara to the approximate middle of the Pierre, the horizon of the fossil Baculites gregoryensis, and represents a period of about 5 million years. The upper unit includes strata between the middle of the Pierre and the top of the Upper Cretaceous Series, which is the top of the Laramie Formation or of laterally equivalent formations; it represents a period of deposition of as much as 11 million years. Comparisons of the collections of fossils from each outcrop with the complete sequence of Upper Cretaceous index fossils can indicate disconformable contacts and lacunae. Widespread disconformities have been found within the Carlile Shale and between the Carlile Shale and the Niobrara Formation. Less extensive disconformities are within the Greenhorn Formation, the Niobrara Formation, and the Pierre Shale.

Scientific Investigations Map↗
USGS2010

Outcrops, fossils, geophysical logs, and tectonic interpretations of the Upper Cretaceous Frontier Formation and contiguous strata in the Bighorn Basin, Wyoming and Montana

In the Bighorn Basin of north-central Wyoming and south-central Montana, the Frontier Formation of early Late Cretaceous age consists of siliciclastic, bentonitic, and carbonaceous beds that were deposited in marine, brackish-water, and continental environments. Most lithologic units are laterally discontinuous. The Frontier Formation conformably overlies the Mowry Shale and is conformably overlain by the Cody Shale. Molluscan fossils collected from outcrops of these formations and listed in this report are mainly of marine origin and of Cenomanian, Turonian, and Coniacian ages. The lower and thicker part of the Frontier in the Bighorn Basin is of Cenomanian age and laterally equivalent to the Belle Fourche Member of the Frontier in central Wyoming. Near the west edge of the basin, these basal strata are disconformably overlain by middle Turonian beds that are the age equivalent of the Emigrant Gap Member of the Frontier in central Wyoming. The middle Turonian beds are disconformably overlain by lower Coniacian strata. Cenomanian strata along the south and east margins of the basin are disconformably overlain by upper Turonian beds in the upper part of the Frontier, as well as in the lower part of the Cody; these are, in turn, conformably overlain by lower Coniacian strata. Thicknesses and ages of Cenomanian strata in the Bighorn Basin and adjoining regions are evidence of regional differential erosion and the presence of an uplift during the early Turonian centered in northwestern Wyoming, west of the basin, probably associated with a eustatic event. The truncated Cenomanian strata were buried by lower middle Turonian beds during a marine transgression and possibly during regional subsidence and a eustatic rise. An uplift in the late middle Turonian, centered in north-central Wyoming and possibly associated with a eustatic fall, caused the erosion of lower middle Turonian beds in southern and eastern areas of the basin as well as in an adjoining region of north-central Wyoming. Similarly, in east-central Wyoming and an adjacent area to the south, Cenomanian strata are disconformably overlain by upper middle and lower upper Turonian strata that probably reflect uplift and erosion in that region during the interim period of middle Turonian time. During later subsidence and a marine transgression, upper Turonian deposits buried Cenomanian beds in areas along the south and east margins of the Bighorn Basin and buried lower middle Turonian beds in much of northern Wyoming. Upper Turonian and lower Coniacian strata are apparently conformable in eastern and southern areas of the basin as well as near Riverton, Kaycee, and Casper in central Wyoming. Upper Turonian strata are absent on the west flank of the Bighorn Basin and in outcrops west of the basin, where middle Turonian beds are disconformably overlain by lower Coniacian beds . The conformable upper Turonian and lower Coniacian beds apparently transgressed an eroded middle Turonian surface in the region, but only Coniacian strata overlie middle Turonian beds on the west side of the basin and areas farther west. Coniacian strata onlap the truncated lower middle Turonian surface west of the basin, indicating a region that had higher elevation possibly resulting from tectonic uplift. In east-central Wyoming and an adjoining region to the south, upper middle Turonian and lower upper Turonian strata are disconformably overlain by lower and middle Coniacian beds. That region apparently was uplifted and eroded during the latest Turonian.

Montana, Wyoming↗
USGS2009

Fossils, lithologies, and geophysical logs of the Mancos Shale from core hole USGS CL-1 in Montrose County, Colorado

As part of a multidisciplinary investigation of Mancos Shale landscapes in the Gunnison Gorge National Conservation Area in Delta and Montrose Counties of western Colorado by the U.S. Geological Survey, Bureau of Land Management, and Bureau of Reclamation, a core of the Upper Cretaceous Mancos Shale was obtained from a borehole, USGS CL-1, in NE1/4 sec. 8, T. 50 N., R. 9 W. (approximately lat 38.61717 degree(s) N., long 107.90174 degree(s) W.), near the town of Olathe. Geophysical records of the borehole include resistivity, gamma ray, and density logs. The core extends between depths of 20 and 557 ft and is about 2.5 in. in diameter. It is composed of calcareous silty shale, as well as scattered beds of limestone and bentonite which were deposited mainly in offshore marine environments during the Cenomanian, Turonian, and Coniacian Stages of the Cretaceous Series. The strata were sampled and analyzed to obtain geochemical data and to identify constituent fossils. Stratigraphic units within the Mancos in the core include the following members, in ascending order: Bridge Creek Limestone (part), Fairport, Blue Hill, Juana Lopez, Montezuma Valley, and Niobrara (part). Strata herein assigned to the Bridge Creek Limestone are about 18 ft thick and consist of silty shale that contains ammonites, bivalves, and a coral of Late Cenomanian age. Strata assigned to the Fairport are about 22 ft thick and composed mainly of calcarenite-bearing, calcareous shale. Fossils in this member include ammonites and bivalves of early middle Turonian age. Overlying the Fairport is the Blue Hill Member, which is about 139 ft thick, and consists of glauconitic, shaley siltstone, and less silty shale. The Juana Lopez Member, overlying the Blue Hill, is about 138 ft thick and composed mainly of calcarenitic, silty shale. Beds in this member contain ammonites and bivalves of late middle and early late Turonian ages. Overlying the Juana Lopez is the Montezuma Valley Member, which is about 55 ft thick and consists of calcarenitic, calcareous silty shale. The Montezuma Valley Member contains ammonites and bivalves of late Turonian age. It is overlain by a lower part of the Niobrara Member of the Mancos Shale which is laterally equivalent to the Fort Hays Limestone Member and part of the overlying Smoky Hill Member of the Niobrara Formation at outcrops in central Colorado. Strata in the core comparable to the Fort Hays are about 39 ft thick and include shaley limestone and calcareous shale, which contain lower Coniacian bivalves. Strata in the core equivalent to part of the Smoky Hill are about 126 ft thick and consist mainly of calcareous silty shale which also contains lower Coniacian bivalves.

Open-File Report↗
USGS2007

Outcrop descriptions and fossils from the Upper Cretaceous Frontier Formation, Wind River Basin and adjacent areas, Wyoming: Chapter 11 in Petroleum systems and geologic assessment of oil and gas resources in the Wind River Basin Province, Wyoming

The Wind River Basin of central Wyoming trends west-northwest from near the community of Alcova to near the town of Dubois (fig. 1). On the perimeter of the basin, outcrops of the Frontier Formation were examined and described during the years 1972-1975. Invertebrate fossils were collected from those outcrops during the years 1972-1996, in places with the assistance of other earth scientists (see Acknowledgments). The Frontier Formation in the Wind River Basin, ranging in thickness from 650 to 1,000 ft thick, consists mainly of sandstone, siltstone, shale, and bentonite of early Late Cretaceous age. The Frontier conformably overlies the Mowry Shale and is conformably overlain by the Cody Shale. A basal unit of the Cody, a sequence of marine noncalcareous shale, is named the Sage Breaks Member. The Frontier consists of two or three members, separated by disconformities; in ascending order, the Belle Fourche, Emigrant Gap, and Wall Creek. At several localities, the Emigrant Gap Member is missing. The formation was deposited mainly in marine environments, although nonmarine beds are conspicuous in the western part of the basin. Strata of the Frontier record a succession of marine regressions and transgressions. Molluscan fossils from the marine beds were identified and related to the chronostratigraphic chart shown in figure 2. The absolute ages on the chart were determined and supplied by J.D. Obradovich (Cobban and others, 2006). In this region, the Belle Fourche is of Cenomanian age, the Emigrant Gap is of early middle Turonian age, and the Wall Creek is of late Turonian and early Coniacian ages. The main purpose of this report is to present biostratigraphic information from studies of the Frontier Formation in the Wind River Basin that could be useful for future stratigraphic investigations of the formation throughout Wyoming. Locations of outcrop sections and associated fossil collections are depicted on accompanying maps and aerial photographs. Graphic descriptions of strata in the outcrops and identifications of fossils from nearby localities also are presented. Those fossils named on the graphic sections commonly have the most restricted time-spans. Fossils collected near the outcrops studied are not always named on the enclosed graphic sections because (1) the specimens are less useful for dating the enclosing beds, (2) the specimens are duplicates, or (3) the specimens could not be related to specific strata in the sections. The names, locations, and members of the outcrop sections and the approximate ages of the constituent strata are summarized in table 1. The index maps used to show locations of outcrop sections and fossil collections are from scanned versions of U.S. Geological Survey topographic maps of various scales and were obtained from TerraServer®. The portion of each map used depended on the areal distribution of the localities involved. The named quadrangles used for locality descriptions, however, all refer to 7½-minute, 1:24,000-scale quadrangles (for example, “Alcova”). The aerial photographs also are from TerraServer®; http://www.terraserver.com/.

Wyoming↗
USGS2003

Alternative Sources of Energy - An Introduction to Fuel Cells

Fuel cells are important future sources of electrical power and could contribute to a reduction in the amount of petroleum imported by the United States. They are electrochemical devices similar to a battery and consist of a container, an anode, a cathode, catalysts, an intervening electrolyte, and an attached electrical circuit. In most fuel cell systems, hydrogen is supplied to the anode and oxygen to the cathode which results in the production of electricity, water, and heat. Fuel cells are comparatively efficient and reliable, have no moving parts, operate without combustion, and are modular and scale-able. Their size and shape are flexible and adaptable. In operation, they are nearly silent, are relatively safe, and generally do not pollute the environment. During recent years, scientists and engineers have developed and refined technologies relevant to a variety of fuel cells. Types of fuel cells are commonly identified by the composition of their electrolyte, which could be either phosphoric acid, an alkaline solution, a molten carbonate, a solid metal oxide, or a solid polymer membrane. The electrolyte in stationary power plants could be phosphoric acid, molten carbonates, or solid metal oxides. For vehicles and smaller devices, the electrolyte could be an alkaline solution or a solid polymer membrane. For most fuel cell systems, the fuel is hydrogen, which can be extracted by several procedures from many hydrogen-bearing substances, including alcohols, natural gas (mainly methane), gasoline, and water. There are important and perhaps unresolved technical problems associated with using fuel cells to power vehicles. The catalysts required in several systems are expensive metals of the platinum group. Moreover, fuel cells can freeze and not work in cold weather and can be damaged by impacts. Storage tanks for the fuels, particularly hydrogen, must be safe, inexpensive, of a reasonable size, and contain a supply sufficient for a trip of several hundred miles. Additional major problems will be the extensive and costly changes in the national infrastructure to obtain, store, and distribute large amounts of the fuels, and in related manufacturing

Bulletin↗
USGS2002

Regional stratigraphic cross sections of Cretaceous rocks from east-central Arizona to the Oklahoma Panhandle

Sedimentary rocks of Cretaceous age along Transect DD'' in eastern Arizona, northern New Mexico, southern Colorado, and western Oklahoma consist mainly of sandstone, siltstone, shale, limestone, and bentonite. They accumulated as sediments in continental, nearshore marine, and offshore marine environments on the west side of a north-trending epicontinental sea. The rocks record intermittent deposition and erosion as well as regional and local subsidence and uplift possibly beginning in Aptian time (about 121-112 Ma) and occurring in Albian through Maastrichtian time (about 112-65.4 Ma). Most of the Lower Cretaceous (Berriasian through Aptian, 142-112 Ma) in this transect is represented by a basal unconformity. The Cretaceous rocks and unconformities along the transect are depicted on the attached lithostratigraphic cross sections (sheets 1 and 2); one extending from the Mogollon Rim in eastern Arizona to Pagosa Springs in southwestern Colorado and the other from Pagosa Springs, Colorado, to Kenton in western Oklahoma. The same rocks and unconformities are also represented on the attached chronostratigraphic profile (sheet 3), which was prepared mainly from surface and subsurface data shown on the lithostratigraphic cross sections.

Arizona, New Mexico, Oklahoma↗
USGS2000

Composition and depositional environment of concretionary strata of early Cenomanian (early Late Cretaceous) age, Johnson County, Wyoming

Unusual, concretion-bearing mudrocks of early Late Cretaceous age, which were deposited in an early Cenomanian epeiric sea, have been recognized at outcrops in eastern Wyoming and in adjoining areas of Montana, South Dakota, Nebraska, and Colorado. In Johnson County, Wyo., on the western flank of the Powder River Basin, these strata are in the lower part of the Belle Fourche Member of the Frontier Formation. At a core hole in south-central Johnson County, they are informally named Unit 2. These strata are about 34 m (110 ft) thick and consist mainly of medium- to dark-gray, noncalcareous, silty shale and clayey or sandy siltstone; and light-gray to grayish-red bentonite. The shale and siltstone are either bioturbated or interlaminated; the laminae are discontinuous, parallel, and even or wavy. Several ichnogenera of deposit feeders are common in the unit but filter feeders are sparse. The unit also contains marine and continental palynomorphs and, near the top, a few arenaceous foraminifers. No invertebrate macrofossils have been found in these rocks. Unit 2 conformably overlies lower Cenomanian shale in the lowermost Belle Fourche Member, informally named Unit 3, and is conformably overlain by lower and middle Cenomanian shale, siltstone, and sandstone within the member, which are informally named Unit 1. The mineral and chemical composition of the three Cenomanian units is comparable and similar to that of shale and siltstone in the Upper Cretaceous Pierre Shale, except that these units contain more SiO2 and less CaO, carbonate carbon, and manganese. Silica is generally more abundant and CaO is generally less abundant in river water than in seawater. The composition of Unit 2 contrasts significantly with that of the underlying and overlying units. Unit 2 contains no pyrite and dolomite and much less sulfur than Units 1 and 3. Sulfate is generally less abundant in river water than in seawater. Unit 2 also includes sideritic and calcitic concretions, whereas Units 1 and 3 contain neither concretions nor siderite and only sparse calcite. Carbon-sulfur-iron chemistry for the concretions suggests that sulfate availability was the limiting factor in pyrite formation and sulfide incorporation in Unit 2. Isotopic compositions of the carbon and oxygen in siderite and calcite from several concretions are variable and suggest cementation during early diagenesis in a variety of microenvironments. The isotopic composition of these carbonate minerals differs from that of Upper Cretaceous marine limestones. When considered in conjunction with the proportions of sulfur, organic carbon, and iron in Unit 2, major-element and micropaleontological data suggest that the composition of the original pore waters and of overlying waters in the late early Cenomanian sea was brackish to fresh. The mudrocks of Units 3 and 2, and a lower part of Unit 1, accumulated on a shelf at low to moderate rates of sedimentation in association with variable but generally weak current action. In Unit 2 and laterally equivalent rocks of the region, the sideritic and calcitic concretions probably indicate the extent of a body of brackish to fresh and oxygen-deficient water. Rates of precipitation in this region during the mid-Cretaceous could have been unusually high and the precipitation probably was seasonal. The organic matter in Unit 2 is humic-rich and would have been derived from continental environments. If the epeiric sea was brackish to fresh in the region of eastern Wyoming and contiguous areas, meteoric runoff from the adjoining lowlands must have been periodically large and the seaway north of the region probably was constricted. Seasonal changes in salinity might have been accompanied by changes in water temperature and oxygen content. The lower part of the Frontier Formation (Units 3, 2, and 1) in Wyoming records an intermittently and easterly prograding shoreline during late early and early middle Cenomanian time. Laterally equivalent strata in Nebraska

Bulletin↗