USGS Science⌕ Search

Geology topics

Douglas M. Morton

Publications and source records attributed to Douglas M. Morton.

At least 19 recordsLinked to original sources
USGS2014

Age and isotopic systematics of Cretaceous borehole and surface samples from the greater Los Angeles Basin region: Implications for the types of crust that might underlie Los Angeles and their distribution along late Cenozoic fault systems

Nine U-Pb zircon ages were determined on plutonic rocks sampled from surface outcrops and rock chips of drill core from boreholes within the greater Los Angeles Basin region. In addition, lead-strontium-neodymium (Pb-Sr-Nd) whole-rock isotopic data were obtained for eight of these samples. These results help to characterize the crystalline basement rocks hidden in the subsurface and provide information that bears on the tectonic history of the myriad of fault systems that have dissected the Los Angeles region over the past 15 m.y. Seven of the nine samples have U-Pb ages ranging from 115 to 103 Ma and whole-rock Pb-Sr-Nd isotopic characteristics that indicate the crystalline basement underneath the greater Los Angeles Basin region is mostly part of the Peninsular Ranges batholith. Furthermore, these data are interpreted as evidence for (1) the juxtaposition of mid-Cretaceous, northern Peninsular Ranges batholith plutonic rocks against Late Cretaceous plutonic rocks of the Transverse Ranges in the San Fernando Valley, probably along the Verdugo fault; (2) the juxtaposition of older northwestern Peninsular Ranges batholith rocks against younger northeastern Peninsular Ranges batholith rocks in the northern Puente Hills, implying transposition of northeastern Peninsular Ranges batholith rocks to the west along unrecognized faults beneath the Chino Basin; and (3) juxtaposition of northern Peninsular Ranges batholith plutonic rocks against Late Cretaceous plutonic rocks of the Transverse Ranges along the San Jose fault in the northern San Jose Hills at Ganesha Park. These mainly left-lateral strike-slip faults of the eastern part of the greater Los Angeles Basin region could be the result of block rotation within the adjacent orthogonal, right-lateral, Elsinore-Whittier fault zone to the west and the subparallel San Jacinto fault zone to the east. The San Andreas fault system is the larger, subparallel, driving force further to the east.

Book chapter↗
USGS2014

U-Pb zircon geochronology of plutonism in the northern Peninsular Ranges batholith, southern California: Implications for the Late Cretaceous tectonic evolution of southern California

Utilizing both sensitive high-resolution ion microprobe (SHRIMP) and conventional isotope dilution–thermal ionization mass spectrometry (ID-TIMS) methods, crystallization and/or emplacement ages have been obtained for a suite of Cretaceous intermediate-composition plutonic samples collected along a roughly E-W–trending traverse through the northern Peninsular Ranges batholith. Previously noted petrologic, mineralogic, and textural differences delineated four major zonations from west to east and raised the need for detailed geochemical and isotopic work. U-Pb zircon geochronology establishes that these zonations are essentially temporally separate. Mean 206 Pb/ 238 U ages date the three older zones from west to east at 126–107 Ma, 107–98 Ma, and 98–91 Ma. Despite petrologic differences, a relatively smooth progression of magmatism is seen from west to east. A fourth zone is defined by magmatism at ca. 85 Ma, which represents emplacement of deeper-level plutons east of the Eastern Peninsular Ranges mylonite zone in an allochthonous thrust sheet in the northeastern Peninsular Ranges batholith. The age data presented here differ slightly from those presented in earlier work for similar rocks exposed across the middle and southern portions of the Peninsular Ranges batholith in that our data define a relatively smooth progression of magmatism from west to east, and that the transition from western-type to eastern-type plutonism is interpreted to have occurred at ca. 98 Ma and not at ca. 105 Ma. The progressive involvement of older crustal components in the enrichment of eastern Peninsular Ranges batholith–type magma sources is documented by the occurrence of Proterozoic zircon inheritance within samples of the eastern part of the batholith.

Book chapter↗
USGS2014

Thermochronology of Cretaceous batholithic rocks in the northern Peninsular Ranges batholith, southern California: Implications for the Late Cretaceous tectonic evolution of southern California

The thermochronology for several suites of Mesozoic metamorphic and plutonic rocks collected throughout the northern Peninsular Ranges batholith (PRB) was studied as part of a collaborative isotopic study to further our understanding of the magmatic and tectonic history of southern California. These sample suites include: a traverse through the plutonic rocks across the northern PRB ( N = 29), a traverse across a central structural and metamorphic transition zone of mainly metasedimentary rocks at Searl ridge ( N = 20), plutonic samples from several drill cores ( N = 7) and surface samples ( N = 2) from the Los Angeles Basin, a traverse across the Eastern Peninsular Ranges mylonite zone ( N = 6), and a suite of plutonic samples collected across the northern PRB ( N = 13) from which only biotite 40 Ar/ 39 Ar ages were obtained. These geochronologic data help to characterize five major petrologic, geochemical, and isotopic zonations of the PRB (western zone, WZ; western transition zone, WTZ; eastern transition zone, ETZ; eastern zone, EZ; and upper-plate zone, UPZ). Apparent cooling rates were calculated using U-Pb zircon (zr) and titanite (sphene) ages; 40 Ar/ 39 Ar ages from hornblende (hbl), biotite (bi), and K-feldspar (Kf); and apatite fission-track (AFT) ages from the same samples. The apparent cooling rates across the northern PRB vary from relatively rapid in the west (zr-hbl ~210 °C/m.y.; zr-bio ~160 °C/m.y.; zr-Kf ~80 °C/m.y.) to less rapid in the central (zr-hb ~280 °C/m.y.; zr-bio ~90 °C/m.y.; zr-Kf ~60 °C/m.y.) and eastern (zr-hbl ~185 °C/m.y.; zr-bio ~180 °C/m.y.; zr-Kf ~60 °C/m.y.) zones. An exception in the eastern zone, the massive San Jacinto pluton, appears to have cooled very rapidly (zr-bio ~385 °C/m.y.). Apparent cooling rates for the UPZ samples are consistently slower in comparison (~25–45 °C/m.y.), regardless of which geochronometers are used. Notable characteristics of the various ages from different dating methods include: (1) Zircon ages indicate a progressive younging of magmatic activity from west to east between ca. 125 and 90 Ma. (2) Various geochronometers were apparently affected by emplacement of the voluminous (ETZ and EZ) La Posta–type plutons emplaced between 99 and 91 Ma. Those minerals affected include K-feldspar in the western zone rocks, biotite and K-feldspar in the WTZ rocks, and white mica and K-feldspar in rocks from Searl ridge. (3) The AFT ages record the time the rocks cooled through the AFT closure temperature (~100 °C in these rocks), likely due to exhumation. Throughout most of the northern traverse, the apatite data indicate the rocks cooled relatively quickly through the apatite partial annealing zone (PAZ; from ~110 °C to 60 °C) and remained at temperatures less than 60 °C as continued exhumation cooled them to present-day surface temperatures. The ages indicate that the western “arc” terrane of the WZ was being uplifted and cooled at ca. 91 Ma, during or shortly after intrusion of the 99–91 Ma La Posta–type plutons to the east. Uplift and cooling occurred later, between ca. 70 Ma and ca. 55 Ma, in the central WTZ, ETZ, and EZ rocks, possibly as upwarping in response to events in the UPZ. The UPZ experienced differential exhumation at ca. 50–35 Ma: Cooling on the western edge was taking place at about the same time or shortly after cooling in the younger samples in the ETZ and EZ, whereas on the east side of the UPZ, the rocks cooled later (ca. 35 Ma) and spent a prolonged time in the apatite PAZ compared to most northern traverse samples. Apparent cooling rates from Los Angeles Basin drill core samples of plutonic rocks show that four are similar to the WTZ thermal histories, and two are similar to the WTZ histories, indicating that the eastern part of the Los Angeles Basin area is underlain by mainly western zone PRB rocks. Thermal histories revealed by samples from Searl ridge indicate that the WTZ magmatism intruded the metasedimentary rocks prior to their deformation and metamorphism at ca. 97 Ma. Both low-grade schists and metasandstones of the western side of the ridge and high-grade gneisses of the eastern side of the ridge have thermal histories consistent with eastern zone rocks—suggesting a temporal/thermal relationship between the western transition zone and the eastern zones. Limited ages from six samples across the Eastern Peninsular Ranges mylonite zone (EPRMZ) indicate that this zone underwent cooling after emplacement of the youngest UPZ rocks at 85 Ma, suggesting that thrusting along the EPRMZ was either coeval with emplacement of the UPZ plutonic rocks or occurred shortly afterwards (~10–15 m.y.). Alternatively, the EPRMZ thrusting may have occurred at temperatures under ~180 °C at yet a later date. The geochronology presented here differs slightly from previous studies for similar rocks exposed across the middle and southern portions of the PRB, in that our data define a relatively smooth progression of magmatism from west to east, and the transition from western, oceanic-arc plutonism to eastern, continental arc plutonism is interpreted to have occurred at ca. 99–97 Ma and not at ca. 105 Ma.

Book chapter↗
USGS2014

Pb-Sr-Nd-O isotopic characterization of Mesozoic rocks throughout the northern end of the Peninsular Ranges batholith: Isotopic evidence for the magmatic evolution of oceanic arc–continental margin accretion during the Late Cretaceous of southern California

Within the duration of the U.S. Geological Survey (USGS)–based Southern California Areal Mapping Project (SCAMP), many samples from the northern Peninsular Ranges batholith were studied for their whole-rock radioisotopic systematics (rubidium-strontium [Rb-Sr], uranium-thorium-lead [U-Th-Pb], and samarium-neodymium [Sm-Nd]), as well as oxygen (O), a stable isotope. The results of three main studies are presented separately, but here we combine them (>400 analyses) to produce a very complete Pb-Sr-Nd-O isotopic profile of an arc-continent collisional zone—perhaps the most complete in the world. In addition, because many of these samples have U-Pb zircon as well as argon mineral age determinations, we have good control of the timing for Pb-Sr-Nd-O isotopic variations. The ages and isotopic variations help to delineate at least four zones across the batholith from west to east—an older western zone (126–108 Ma), a transitional zone (111–93 Ma), an eastern zone (94–91 Ma), and a much younger allochthonous thrust sheet (ca. 84 Ma), which is the upper plate of the Eastern Peninsular Ranges mylonite zone. Average initial 87 Sr/ 86 Sr (Sr i ), initial 206 Pb/ 204 Pb ( 206 Pb i ), initial 208 Pb/ 204 Pb (average 208 Pb i ), initial epsilon Nd (average ε Ndi ), and δ 18 O signatures range from 0.704, 18.787, 38.445, +3.1, and 4.0‰–9.0‰, respectively, in the westernmost zone, to 0.7071, 19.199, 38.777, −5, and 9‰–12‰, respectively, in the easternmost zone. The older western zone is therefore the more chemically and isotopically juvenile, characterized mostly by values that are slightly displaced from a mantle array at ca. 115 Ma, and similar to some modern island-arc signatures. In contrast, the isotopic signatures in the eastern zones indicate significant amounts of crustal involvement in the magmatic plumbing of those plutons. These isotopic signatures confirm previously published results that interpreted the Peninsular Ranges batholith as a progressively contaminated magmatic arc. The Peninsular Ranges batholith magmatic arc was initially an oceanic arc built on Panthalassan lithosphere that eventually evolved into a continental margin magmatic arc collision zone, eventually overriding North American cratonic lithosphere. Our Pb-Sr-Nd data further suggest that the western arc rocks represent a nearshore or inboard oceanic arc, as they exhibit isotopic signatures that are more enriched than typical mid-ocean-ridge basalt (MORB). Isotopic signatures from the central zone are transitional and indicate that enriched crustal magma sources were becoming involved in the northern Peninsular Ranges batholith magmatic plumbing. As the oceanic arc–continental margin collision progressed, a mixture of oceanic mantle and continental magmatic sources transpired. Magmatic production in the northern Peninsular Ranges batholith moved eastward and continued to tap enriched crustal magmatic sources. Similar modeling has been previously proposed for two other western margin magmatic arcs, the Sierra Nevada batholith of central California and the Idaho batholith. Calculated initial Nd signatures at ca. 100 Ma for Permian–Jurassic and Proterozoic basement rocks from the nearby San Gabriel Mountains and possible source areas along the southwestern Laurentian margin of southern California, southwestern Arizona, and northern Sonora strongly suggest their involvement with deep crustal magma mixing beneath the eastern zones of the Peninsular Ranges batholith, as well as farther east in continental lithospheric zones. Last, several samples from the allochthonous, easternmost upper-plate zone, which are considerably younger (ca. 84 Ma) than any of the rocks from the northern Peninsular Ranges batholith proper, have even more enriched average Sr i , 206 Pb i , 208 Pb i , and ε Ndi signatures of 0.7079, 19.344, 38.881, and −6.6, respectively, indicative of the most-evolved magma sources in the northern Peninsular Ranges batholith and similar to radioisotopic values for rocks from the nearby Transverse Ranges, suggesting a genetic connection between the two.

Book chapter↗
USGS2014

SHRIMP-RG U-Pb ages of provenance and metamorphism from detrital zircon populations and Pb-Sr-Nd signatures of prebatholithic metasedimentary rocks at Searl Ridge, northern Peninsular Ranges batholith, southern California: Implications for their age, origin, and tectonic setting

Twenty-four samples were collected from prebatholithic metasedimentary rocks along Searl Ridge, the north rim of the Diamond Valley Reservoir, Domenigoni Valley, centrally located in the northern Peninsular Ranges of southern California. These rocks exhibit progressive metamorphism from west to east across fundamental structural discontinuities now referred to as a “transition zone.” Documented structural and mineralogical changes occur across this metamorphic gradient. Sensitive high-resolution ion microprobe–reverse geometry (SHRIMP-RG) U-Pb ages were obtained from detrital zircons from metasedimentary rocks through the transition zone. To the west, metapelitic and minor metasandstone units yielded numerous concordant 206 Pb/ 238 U ages between 210 and 240 Ma, and concordant 207 Pb/ 206 Pb ages at 1075–1125 Ma, 1375–1430 Ma, and 1615–1735 Ma, although distinct differences in provenance were noted between units. A few older 207 Pb/ 206 Pb ages obtained were ca. 2250 Ma and ca. 2800 Ma. Rocks of the eastern part of the transition zone include high-grade paragneisses that yielded numerous concordant 206 Pb/ 238 U ages between 103 and 123 Ma and between 200 and 255 Ma, and concordant 207 Pb/ 206 Pb ages at 1060–1150 Ma, 1375–1435 Ma, and 1595–1710 Ma. Some zircon results from these high-grade gneisses are marked by distinct Pb-loss discordia with lower-intercept ages of ca. 215 Ma and Paleoproterozoic upper-intercept ages. Younger ages between 100 and 105 Ma are mainly obtained from rims of some zircon grains that are characterized by low Th/U values (<0.1) and high U contents (>1000 ppm), indicating the likelihood of metamorphic zircon growth at that time. The similarity of zircon age populations between western and eastern units through the transition zone indicates that this fundamental structure probably dissects sediments of the same basin. This supposition is further supported by initial whole-rock Pb-Sr-Nd isotopic data that show similar average initial 206 Pb/ 204 Pb (18.65 to 18.9), 87 Sr/ 86 Sr (0.713 to 0.718), and ε Nd (−7 to −12) values for both the western and eastern units—values that also indicate the presence of significantly older crustal material in their provenance. Magmatic zircons from a diorite dike that crosscuts the foliation, but is itself subsequently metamorphosed, yielded a SHRIMP-RG concordia age of 103.3 ± 0.73 Ma, which is within agreement of an isotope dilution–thermal ionization mass spectrometry (ID-TIMS) U-Pb age of 103.37 ± 0.25 Ma. A postmetamorphic, cross-cutting pegmatite yielded discordant U-Pb zircon age data, but euhedral, glassy monazite from the pegmatite yielded a slightly discordant 207 Pb/ 235 U age of 101.85 ± 0.35 Ma and a Th-Pb age of 97.53 ± 0.18 Ma, suggesting that this pegmatite was injected during or just after deformation ceased. The age and initial Pb-Sr-Nd signature for the dioritic dike indicate it was produced during the transition zone plutonism elsewhere in the northern Peninsular Ranges batholith, whereas the pegmatitic dike was derived from crustal anatexis. Collectively, these results indicate that this sequence of metasedimentary rocks was derived from mainly a Late Permian to Early Triassic igneous provenance that probably intruded Proterozoic crust. The sequence was subsequently metamorphosed during deformation of the Cretaceous continental margin at ca. 105 to 97 Ma.

Book chapter↗
USGS2014

A compilation of K-Ar-ages for southern California

The purpose of this report is to make available a large body of conventional K-Ar ages for granitic, volcanic, and metamorphic rocks collected in southern California. Although one interpretive map is included, the report consists primarily of a systematic listing, without discussion or interpretation, of published and unpublished ages that may be of value in future regional and other geologic studies. From 1973 to 1979, 468 rock samples from southern California were collected for conventional K-Ar dating under a regional geologic mapping project of Southern California (predecessor of the Southern California Areal Mapping Project). Most samples were collected and dated between 1974 and 1977. For 61 samples (13 percent of those collected), either they were discarded for varying reasons, or the original collection data were lost. For the remaining samples, 518 conventional K-Ar ages are reported here; coexisting mineral pairs were dated from many samples. Of these K-Ar ages, 225 are previously unpublished, and identified as such in table 1. All K-Ar ages are by conventional K-Ar analysis; no 40 Ar/ 39 Ar dating was done. Subsequent to the rock samples collected in the 1970s and reported here, 33 samples were collected and 38 conventional K-Ar ages determined under projects directed at (1) characterization of the Mesozoic and Cenozoic igneous rocks in and on both sides of the Transverse Ranges and (2) clarifying the Mesozoic and Cenozoic tectonics of the eastern Mojave Desert. Although previously published (Beckerman et al., 1982), another eight samples and 11 conventional K-Ar ages are included here, because they augment those completed under the previous two projects.

California↗
USGS2005

Preliminary geologic map of the Hemet 7.5' quadrangle, Riverside County, California

The Hemet 7.5' quadrangle is located near the eastern edge of the Perris block of the Peninsular Ranges batholith. The northeastern corner of the quadrangle extends across the San Jacinto Fault Zone onto the edge of the San Jacinto Mountains block. The Perris block is a relatively stable area located between the Elsinore Fault Zone on the west and the San Jacinto Fault Zone on the east. Both of the fault zones are active; the San Jacinto being the seismically most active in southern California. The fault zone is obscured by very young alluvial deposits. The concealed location of the San Jacinto Fault Zone shown on this quadrangle is after Sharp, 1967. The geology of the quadrangle is dominated by Cretaceous tonalite formerly included in the Coahuila Valley pluton of Sharp (1967). The northern part of Sharp's Coahuila Valley pluton is separated out as the Hemet pluton. Tonalite of the Hemet pluton is more heterogeneous than the tonalite of the Coahuila Valley pluton and has a different sturctural pattern. The Coahuila Valley pluton consists of relatively homogeneous hornblende-biotite tonalite, commonly with readily visible large euhedral honey-colored sphene crystals. Only the tip of the adjacent Tucalota Valley pluton, another large tonalite pluton, extends into the quadrangle. Tonalite of the Tucalota Valley pluton is very similar to the tonalite of the Coahuila Valley pluton except it generally lacks readily visible sphene. In the western part of the quadrangle a variety of amphibolite grade metasedimentary rocks are informally referred to as the rocks of Menifee Valley; named for exposures around Menifee Valley west of the Hemet quadrangle. In the southwestern corner of the quadrangle a mixture of schist and gneiss marks a suture that separated low metamorphic grade metasedimentary rocks to the west from high metamorphic grade rocks to the east. The age of these rocks is interpreted to be Triassic and the age of the suturing is about 100 Ma, essentially the same age as the adjacent Coahuila Valley pluton. Rocks within the suture zone consist of a mixture of lithologies from both sides of the suture. Gneiss, schist, and anatectic gneiss are the predominate lithologies within the rocks on the east side of the suture. Lesser amounts of metalithic greywacke and lenticular masses of black amphibolite are subordinate rock types. Biotite, biotite-sillimanite and lesser amounts of garnet-biotite-sillimanite schist and metaquartzite-metalithic greywacke lithologies occur west of the suture. Pleistocene continental beds, termed the Bautista beds occur east of the San Jacinto Fault Zone in the northeast corner of the quadrangle. Most of the Bautista beds were derived from the San Jacinto pluton that is located just to the east of the sedimentary rocks. Along the northern part of the quadrangle is the southern part of a large Holocene-late Pleistocene fan emanating from Baustista Canyon. Sediments in the Bautista fan are characterized by their content of detritus derived from amphibolite grade metasedimentary rocks located in the Bautista Canyon drainage. Between the Holocene-late Pleistocene Bautista fan and the Santa Rosa Hills is the remnant of a much older Bautista Canyon alluvial fan. A pronounced Holocene-late Pleistocene channel was developed along the south fringe of the very old alluvial fan and the Santa Rosa Hill. A now dissected late to middle Pleistocene alluvial complex was produced by the coalesced fans of Goodhart, St. Johns, and Avery canyons, and Cactus Valley. Pleistocene continental beds, termed the Bautista beds occur east of the San Jacinto Fault Zone in the northeast corner of the quadrangle. Most of the Bautista beds were derived from the San Jacinto pluton that is located just to the east of the sedimentary rocks. Along the northern part of the quadrangle is the southern part of a large Holocene-late Pleistocene fan emanating from Baustista Canyon.

California↗
USGS2003

Preliminary soil-slip susceptibility maps, southwestern California

This group of maps shows relative susceptibility of hill slopes to the initiation sites of rainfall-triggered soil slip-debris flows in southwestern California. As such, the maps offer a partial answer to one part of the three parts necessary to predict the soil-slip/debris-flow process. A complete prediction of the process would include assessments of “where”, “when”, and “how big”. These maps empirically show part of the “where” of prediction (i.e., relative susceptibility to sites of initiation of the soil slips) but do not attempt to show the extent of run out of the resultant debris flows. Some information pertinent to “when” the process might begin is developed. “When” is determined mostly by dynamic factors such as rainfall rate and duration, for which local variations are not amenable to long-term prediction. “When” information is not provided on the maps but is described later in this narrative. The prediction of “how big” is addressed indirectly by restricting the maps to a single type of landslide process—soil slip-debris flows. The susceptibility maps were created through an iterative process from two kinds of information. First, locations of sites of past soil slips were obtained from inventory maps of past events. Aerial photographs, taken during six rainy seasons that produced abundant soil slips, were used as the basis for soil slip-debris flow inventory. Second, digital elevation models (DEM) of the areas that were inventoried were used to analyze the spatial characteristics of soil slip locations. These data were supplemented by observations made on the ground. Certain physical attributes of the locations of the soil-slip debris flows were found to be important and others were not. The most important attribute was the mapped bedrock formation at the site of initiation of the soil slip. However, because the soil slips occur in surficial materials overlying the bedrocks units, the bedrock formation can only serve as a surrogate for the susceptibility of the overlying surficial materials. The maps of susceptibility were created from those physical attributes learned to be important from the inventories. The multiple inventories allow a model to be created from one set of inventory data and evaluated with others. The resultant maps of relative susceptibility represent the best estimate generated from available inventory and DEM data. Slope and aspect values used in the susceptibility analysis were 10-meter DEM cells at a scale of 1:24,000. For most of the area 10-meter DEMs were available; for those quadrangles that have only 30-meter DEMs, the 30-meter DEMS were resampled to 10-meters to maintain resolution of 10-meter cells. Geologic unit values used in the susceptibility analysis were five-meter cells. For convenience, the soil slip susceptibility values are assembled on 1:100,000-scale bases. Any area of the 1:100,000-scale maps can be transferred to 1:24,000-scale base without any loss of accuracy. Figure 32 is an example of part of a 1:100,000-scale susceptibility map transferred back to a 1:24,000-scale quadrangle.

California↗
USGS2003

Preliminary geologic map of the Winchester 7.5' quadrangle, Riverside County, California

The Winchester quadrangle is located in the northern part of the Peninsular Ranges Province within the central part of the Perris block, a relatively stable, rectangular in plan view, area located between the Elsinore and San Jacinto fault zones (see location map). The quadrangle is underlain by Cretaceous and older basement rocks. Cretaceous plutonic rocks are part of the composite Peninsular Ranges batholith, which indicates wide variety of granitic rocks, ranging from granite to gabbro. Parts of three major plutonic complexes are within the quadrangle, the Lakeview Mountains pluton, the Domenigoni Valley pluton and the Paloma Valley ring complex. In the northern part of the quadrangle is the southern part of the Lakeview Mountains pluton, a large composite body, most of which lies in the quadrangle to the north. In the center part of the quadrangle is the eastern part of the Domenigoni Valley pluton, which consists of massive biotite-hornblende granodiorite and tonalite; some tonalite in the southern part of the pluton has a relatively pronounced foliation produced by oriented biotite and hornblende. Common to abundant equant-shaped, mafic inclusions occur through out the pluton except in the outermost part where inclusions are absent. The pluton was passively emplaced by piecemeal stoping of a variety of older rocks and the eastern contact is well exposed in the quadrangle. Associated with the Domenigoni Valley pluton is a swarm of latite dikes; the majority of these dikes occur in the Winchester quadrangle, but they extend into the Romoland quadrangle to the west. The latite dikes intrude both the pluton and adjacent metamorphic rocks, most are foliated, and most have a well developed lineation defined by oriented biotite and/or hornblende crystals. Dikes intruding the pluton were emplaced in northwest striking joints; and dikes intruding the metamorphic rocks were emplaced along foliation planes. In the eastern part of the quadrangle a Cretaceous age suture juxtaposes low-metamorphic grade Mesozoic rocks against high-metamorphic grade gneissic-textured Mesozoic rocks. Juxtaposition occurred when the high-metamorphic grade rocks were at upper amphibolite grade temperatures, and produced a steep thermal gradient in the low-metamorphic grade Mesozoic rocks. Age of suturing and attendant metamorphism, based on metamorphic mineral ages, is about 100 Ma (L. Snee, personal communication, 2002). The suture zone appears to vary in thickness, and includes within it a number of metadunite bodies and related rocks. Prebatholithic rocks of Mesozoic age include a wide variety of sedimentary rocks of greenschist or lower metamorphic grade, in the western and central part of the quadrangle, and upper amphibolite grade near the eastern edge of the quadrangle. The metamorphic grade increases from greenschist to upper amphibolite grade over a distance of less than two miles; andalusite and sillimanite isograds are closely spaced near the suture. Metamorphism was Buchan type of relatively high temperature and relatively low pressure (Schwarcz, 1969). Common lithologies of the low metamorphic grade suite include phyllite, lithic greywacke, impure quartzite, meta-arkose, and interlayered quartzite and phyllite. Most of the layering and foliation in the metamorphic rocks is the result of intense structural transposition. Relic bedding appears to be restricted to very local occurrences in hinges of slip folds. The upper amphibolite grade, gneissic-textured Mesozoic rocks consist of sillimanite-biotite gneiss, black amphibolite, and impure quartzite. Anatectic gneiss containing igneous textured segregations of quartz and feldspar is commonly inter leaved with biotite gneiss.

Open-File Report↗
USGS2003

Preliminary geologic map of the Murrieta 7.5' quadrangle, Riverside County, California

The Murrieta quadrangle is located in the northern part of the Peninsular Ranges Province and includes parts of two structural blocks, or structural subdivisions of the province. The quadrangle is diagonally crossed by the active Elsinore fault zone, a major fault zone of the San Andreas fault system, and separates the Santa Ana Mountains block to the west from the Perris block to the east. Both blocks are relatively stable internally and within the quadrangle are characterized by the presence of widespread erosional surfaces of low relief. The Santa Ana Mountains block, in the Murrieta quadrangle, is underlain by undifferentiated, thick-layered, granular, impure quartzite and well-layered, fissile, phyllitic metamorphic rock of low metamorphic grade. Both quartzite and phyllitic rocks are Mesozoic. Unconformably overlying the metamorphic rocks are remnants of basalt flows having relatively unmodified flow surfaces. The age of the basalt is about 7-8Ma. Large shallow depressions on the surface of the larger basalt remnants form vernal ponds that contain an endemic flora. Beneath the basalt the upper part of the metamorphic rocks is deeply weathered. The weathering appears to be the same as the regional Paleocene saprolitic weathering in southern California. West of the quadrangle a variable thickness sedimentary rock, physically resembling Paleogene rocks, occurs between the basalt and metamorphic rock. Where not protected by the basalt, the weathered rock has been removed by erosion. The dominant feature on the Perris block in the Murrieta quadrangle is the south half of the Paloma Valley ring complex, part of the composite Peninsular Ranges batholith. The complex is elliptical in plan view and consists of an older ring-dike with two subsidiary short-arced dikes that were emplaced into gabbro by magmatic stoping. Small to large stoped blocks of gabbro are common within the ring-dikes. A younger ring-set of hundreds of thin pegmatite dikes occur largely within the central part of the complex. These pegmatite dikes were emplaced into a domal fracture system, apparently produced by cauldron subsidence, and include in the center of the complex, a number of flat-floored granophyre bodies. The granophyre is interpreted to be the result of pressure quenching of pegmatite magma. Along the eastern edge of the quadrangle is the western part of a large septum of medium metamorphic grade Mesozoic schist. A dissected basalt flow caps the Hogbacks northeast of Temecula, and represents remnants of a channel filling flow. Beneath the basalt is a thin deposit of stream gravel. Having an age of about 10Ma, this basalt is about 2-3Ma older than the basalt flows in the Santa Ana Mountains. The Elsinore fault zone forms a complex of pull-apart basins. The west edge of the fault zone, the Willard Fault, is marked by the high, steep eastern face of the Santa Ana Mountains. The east side of the zone, the Wildomar Fault, forms a less pronounced physiographic step. In the center of the quadrangle a major splay of the fault zone, the Murrieta Hot Springs Fault, strikes east. Branching of the fault zone causes the development of a broad alluvial valley between the Willard Fault and the Murrieta Hot Springs Fault. All but the axial part of the zone between the Willard and Wildomar Faults consist of dissected Pleistocene sedimentary units. The axial part of the zone is underlain by Holocene and latest Pleistocene sedimentary units.

California↗
USGS2003

Preliminary geologic map of the Perris 7.5' quadrangle, Riverside County, California

Open-File Report 03-270 contains a digital geologic map database of the Perris 7.5’ quadrangle, Riverside County, California that includes: 1. ARC/INFO (Environmental Systems Research Institute, http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. 2. A Postscript file to plot the geologic map on a topographic base, and containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. 3. Portable Document Format (.pdf) files of: a. A Readme file b. The same graphic as described in 2 above. Test plots have not produced precise 1:24,000- scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formationname, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous. Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand. In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc.

California↗
USGS2003

Preliminary geologic map of the Elsinore 7.5' quadrangle, Riverside County, California

Open-File Report 03-281 contains a digital geologic map database of the Elsinore 7.5’ quadrangle, Riverside County, California that includes: 1. ARC/INFO (Environmental Systems Research Institute, http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. 2. A Postscript file to plot the geologic map on a topographic base, and containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. 3. Portable Document Format (.pdf) files of: a. This Readme; includes in Appendix I, data contained in els_met.txt b. The same graphic as plotted in 2 above. Test plots have not produced precise 1:24,000-scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation-name, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous. Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand. In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc. Even though this is an Open-File Report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above).

California↗
USGS2003

Preliminary geologic map of the San Bernardino 30' x 60' quadrangle, California (includes preliminary GIS database)

The San Bernardino 30'x60' quadrangle, southern California, is diagonally bisected by the San Andreas Fault Zone, separating the San Gabriel and San Bernardino Mountains, major elements of California's east-oriented Transverse Ranges Province. Included in the southern part of the quadrangle is the northern part of the Peninsular Ranges Province and the northeastern part of the oil-producing Los Angeles basin. The northern part of the quadrangle includes the southern part of the Mojave Desert Province. Pre-Quaternary rocks within the San Bernardino quadrangle consist of three extensive, well-defined basement rock assemblages, the San Gabriel Mountains, San Bernardino Mountains, and the Peninsular Ranges assemblages, and a fourth assemblage restricted to a narrow block bounded by the active San Andreas Fault and the Mill Creek Fault. Each of these basement rock assemblages is characterized by a relatively unique suite of rocks that was amalgamated by the end of the Cretaceous and (or) early Cenozoic. Some Tertiary sedimentary and volcanic rocks are unique to specific assemblages, and some overlap adjacent assemblages. A few Miocene and Pliocene units cross the boundaries of adjacent assemblages, but are dominant in only one. Tectonic events directly and indirectly related to the San Andreas Fault system have partly dismembered the basement rocks during the Neogene, forming the modern-day physiographic provinces. Rocks of the four basement rock assemblages are divisible into an older suite of Late Cretaceous and older rocks and a younger suite of post-Late Cretaceous rocks. The age span of the older suite varies considerably from assemblage to assemblage, and the point in time that separates the two suites varies slightly. In the Peninsular Ranges, the older rocks were formed from the Paleozoic to the end of Late Cretaceous plutonism, and in the Transverse Ranges over a longer period of time extending from the Proterozoic to metamorphism at the end of the Cretaceous. Within the Peninsular Ranges a profound diachronous unconformity marks the pre-Late Cretaceous-post-Late Cretaceous subdivision, but within the Transverse Ranges the division appears to be slightly younger, perhaps coinciding with the end of the Cretaceous or extending into the early Cenozoic. Initial docking of Peninsular Ranges rocks with Transverse Ranges rocks appears to have occurred at the terminus of plutonism within the Peninsular Ranges. During the Paleogene there was apparently discontinuous but widespread deposition on the basement rocks and little tectonic disruption of the amalgamated older rocks. Dismemberment of these Paleogene and older rocks by strike-slip, thrust, and reverse faulting began in the Neogene and is ongoing. The Peninsular Ranges basement rock assemblage is made up of the Peninsular Ranges batholith and a variety of metasedimentary rocks. Most of the plutonic rocks of the batholith are granodiorite and tonalite in composition; primary foliation is common, mainly in the eastern part. Tertiary sedimentary rocks of the Los Angeles Basin crop out in the Puente and San Jose Hills along with the spatially associated Glendora Volcanics; both units span the boundary between the Peninsular Ranges and San Gabriel Mountains basement rock assemblages. The San Gabriel Mountains basement rock assemblage includes two discrete areas, the high standing San Gabriel Mountains and the relatively low San Bernardino basin east of the San Jacinto Fault. The basement rock assemblage is characterized by a unique suite of rocks that include anorthosite, Proterozoic and Paleozoic gneiss and schist, the Triassic

California↗
USGS2003

Geologic map and digital database of the Redlands 7.5' quadrangle, San Bernardino and Riverside Counties, California

This geologic database of the Redlands 7.5' quadrangle was prepared by the Southern California Areal Mapping Project (SCAMP), a regional geologic-mapping project sponsored jointly by the U.S. Geological Survey and the California Geological Survey. The database was developed as a contribution to the National Cooperative Geologic Mapping Program's National Geologic Map Database, and is intended to provide a general geologic setting of the Redlands quadrangle. The database and map provide information about earth materials and geologic structures, including faults and folds that have developed in the quadrangle due to complexities in the San Andreas Fault system. The Redlands 7.5' quadrangle contains earth materials and structures that provide insight into the late Cenozoic geologic evolution of the southern California Inland Empire region. Important stratigraphic and structural elements include (1) the modern trace of the San Andreas and San Jacinto faults and (2) late Tertiary and Quaternary sedimentary materials and geologic structures that formed during the last million years or so and that record complex geologic interactions within the San Andreas Fault system. These materials and the structures that deform them provide the geologic framework for investigations of earthquake hazards and ground-water recharge and subsurface flow. Geologic information contained in the Redlands database is general-purpose data that is applicable to land-related investigations in the earth and biological sciences. The term "general-purpose" means that all geologic-feature classes have minimal information content adequate to characterize their general geologic characteristics and to interpret their general geologic history. However, no single feature class has enough information to definitively characterize its properties and origin. For this reason the database cannot be used for site-specific geologic evaluations, although it can be used to plan and guide investigations at the site-specific level. This summary pamphlet discusses major categories of surficial materials in the Redlands quadrangle, and provides a conceptual framework and basis for how geologicmap units containing such materials are recognized and correlated.

California↗
USGS2003

Preliminary geologic map of the Fontana 7.5' quadrangle, Riverside and San Bernardino Counties, California

Open-File Report 03-418 is a digital geologic data set that maps and describes the geology of the Fontana 7.5’ quadrangle, Riverside and San Bernardino Counties, California. The Fontana quadrangle database is one of several 7.5’ quadrangle databases that are being produced by the Southern California Areal Mapping Project (SCAMP). These maps and databases are, in turn, part of the nation-wide digital geologic map coverage being developed by the National Cooperative Geologic Map Program of the U.S. Geological Survey (USGS). General Open-File Report 03-418 contains a digital geologic map database of the Fontana 7.5’ quadrangle, Riverside and San Bernardino Counties, California that includes: 1. ARC/INFO (Environmental Systems Research Institute, http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. 2. A Postscript file (fon_map.ps) to plot the geologic map on a topographic base, and containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. 3. An Encapsulated PostScript (EPS) file (fon_grey.eps) created in Adobe Illustrator 10.0 to plot the geologic map on a grey topographic base, and containing a Correlation of Map Units (CMU), a Description of Map Units (DMU), and an index map. 4. Portable Document Format (.pdf) files of: a. the Readme file; includes in Appendix I, data contained in fon_met.txt b. The same graphics as plotted in 2 and 3 above.Test plots have not produced precise 1:24,000-scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation-name, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous. Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand. In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc. Even though this is an Open-File Report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (4b above) or plotting the postscript files (2 or 3 above).

California↗
USGS2002

Geologic map of the Corona South 7.5' quadrangle, Riverside and Orange counties, California

Open-File Report 01-021 contains a digital geologic map database of the Corona South 7.5’ quadrangle, Riverside County, California that includes: 1. ARC/INFO (Environmental Systems Research Institute, http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. 2. A Postscript file to plot the geologic map on a topographic base, and containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. 3. Portable Document Format (.pdf) files of: a. A Readme file; includes in Appendix I, data contained in crs_met.txt b. The same graphic as plotted in 2 above. Test plots have not produced 1:24,000-scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation-name, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous. Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand. In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc. Marine deposits are in part overlain by local, mostly alluvial fan, deposits and are labeled Qomf. Grain size follows f. Even though this is an Open-File Report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above).

California↗
USGS2002

Geologic map of the Corona North 7.5' quadrangle, Riverside and San Bernardino Counties, California

Open-File Report 02-22 contains a digital geologic map database of the Corona North 7.5’ quadrangle, Riverside and San Bernardino Counties, California that includes: ARC/INFO (Environmental Systems Research Institute, http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. A Postscript file to plot the geologic map on a topographic base, and containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. Portable Document Format (.pdf) files of: a. This Readme; includes in Appendix I, data contained in crn_met.txt b. The same graphic as plotted in 2 above. Test plots have not produced precise 1:24,000- scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation name, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous. Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand. In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc. Marine deposits are in part overlain by local, mostly alluvial fan, deposits and are labeled Qomf. Grain size follows f. Even though this is an Open-File Report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above).

California↗