USGS Science⌕ Search

Geology topics

Daniel Larsen

Publications and source records attributed to Daniel Larsen.

5 recordsLinked to original sources
USGS2019

Quaternary displacement on the Joiner Ridge Fault, eastern Arkansas

The New Madrid seismic zone of the central United States is an intraplate seismic zone with blind structures that are not seismically active but may pose seismic hazards. The Joiner Ridge fault is the 35 km long east-bounding fault of the Joiner Ridge blind horst located in eastern Arkansas approximately 50 km northwest of Memphis, Tennessee. Shallow S-wave (SH-mode) seismic reflection profiles, continuous cores, and radiometric dating of Quaternary alluvium across the Joiner Ridge fault reveal down-to-the-east reverse faulting and folding within of the top of the Eocene strata and overlying Quaternary Mississippi River alluvium. The base of the Quaternary alluvium has an age of 20.3 ka and is vertically displaced 12 m, resulting in an average slip rate of 0.6 + 0.1 mm/yr over the past 20.3 ka. The overlying late Wisconsinan and Holocene alluvial facies are also displaced by the Joiner Ridge fault. These facies increase in thickness across the Joiner Ridge fault and were used to calculate late Wisconsinan and Holocene slip rates. The JRF slipped 7 m between 20.3 ka and 17.5 ka (2.8 ka), reflecting a slip rate of 2.5 + 0.3 mm/yr. From 12.3 ka to 11.5 ka (0.8 ka) the JRF slipped 3 m at an average slip rate of 3.8 + 0.9 mm/yr. There were 2 m of slip on the JRF between 11.5 ka and 8.9 ka (2.6 ka), reflecting a slip rate of 0.8 + 0.3 mm/yr. No apparent slip has occurred on the JRF within the last 8.90 ka. This research illustrates that slip rates on the JRF have varied through the late Wisconsinan and early Holocene, but the Joiner Ridge fault has been inactive since the middle Holocene.

Arkansas↗
USGS2018

Preliminary evaluation of the hydrogeology and groundwater quality of the Mississippi River Valley alluvial aquifer and Memphis aquifer at the Tennessee Valley Authority Allen Power Plants, Memphis, Shelby County, Tennessee

The hydrogeology, groundwater quality, and potential for hydraulic connection between the Mississippi River Valley alluvial aquifer and the Memphis aquifer in the area of the Tennessee Valley Authority (TVA) Allen Combined Cycle and Allen Fossil Plants in southwestern Memphis, Tennessee, were evaluated from September through December 2017. The study was designed as a preliminary assessment of the potential for leakage of groundwater from the Mississippi River Valley alluvial aquifer through the underlying upper Claiborne confining unit into the underlying Memphis aquifer at the plants. A short-term aquifer test of four of the five Memphis aquifer production wells installed at the Allen Combined Cycle Plant induced drawdown in water levels in the Mississippi River Valley alluvial aquifer, locally. The largest drawdown occurred in the eastern and southeastern parts of the TVA plants area, and generally was coincident with locations where stratigraphic data show increased thickness of and depth to the base of the alluvium and decreased thickness and inferred offset in the base of the confining unit relative to nearby locations. In contrast, stratigraphic data for most other locations at the site indicate shallower depths to the base of the alluvium and more consistent thickness of and depth to the base of the confining unit, which corresponds with areas where less drawdown was observed during the test. Water-quality results for samples from the production wells and from monitoring wells screened in the Mississippi River Valley alluvial aquifer indicate that groundwater with higher dissolved-solids concentrations and tritium from this shallow aquifer has mixed with water in the upper part of the Memphis aquifer at one of the production wells. Results of the study collectively confirm that the Mississippi River Valley alluvial and Memphis aquifers are hydraulically connected near the TVA plants area.

Tennessee↗
USGS2017

Quaternary displacement rates on the Meeman‐Shelby fault and Joiner ridge horst, eastern Arkansas: Results from coring Mississippi River alluvium

This research used coring and optically stimulated luminescence (OSL) dating of displaced, deeply buried Quaternary alluvium to determine vertical displacement rates for the Meeman‐Shelby fault and the Joiner ridge horst, two structures in northeastern Arkansas that have no modern seismicity associated with them. We drilled continuous cores of the entire alluvial section in the hanging wall of each structure, performed detailed core descriptions and analyses, and obtained three OSL ages from each core. The Meeman‐Shelby fault core consists of 36 m of 4.3–5.2‐ka Holocene alluvium overlying 4 m of 14.3‐ka Kennett alluvium that in turn overlies the upper part of Eocene Claiborne Group sediments at a depth of 41 m. Seismic reflection indicates that the basal (Kennett) alluvium at the Meeman‐Shelby fault is displaced ∼28 m across the Meeman‐Shelby fault, which equates to a time‐averaged vertical displacement rate of 2 mm/yr within the last 14.3 ka. The Joiner ridge horst core consists, in descending order, of 11 m of 6.3‐ka Holocene alluvium, 14 m of 11.5‐ka Morehouse alluvium, a paleosol, 6 m of Kennett alluvium, and 4 m of 20.3‐ka Sikeston alluvium that in turn overlies the upper part of Eocene Claiborne Group sediments at a depth of 36 m. Lignite exploration drilling conducted in the 1970s indicates that basal (Sikeston) alluvium is displaced ∼20 m across the eastern bounding fault of the Joiner ridge horst, resulting in a time‐averaged vertical displacement rate of ∼1 mm/yr within the last 20.3 ka. These late Quaternary displacement rates are comparable to time‐averaged displacement rates of faults within the active New Madrid seismic zone.

Arkansas↗
USGS2000

Stratigraphy, correlation, depositional setting, and geophysical characteristics of the Oligocene Snowshoe Mountain Tuff and Creede Formation in two cored boreholes

Core descriptions and geophysical logs from two boreholes (CCM-1 and CCM-2) in the Oligocene Snowshoe Mountain Tuff and Creede Formation, south-central Colorado, are used to interpret sedimentary and volcanic facies associations and their physical properties. The seven facies association include a mixed sequence of intracaldera ash-flow tuffs and breccias, alluvial and lake margin deposits, and tuffaceous lake beds. These deposits represent volcanic units related to caldera collapse and emplacement of the Snowshoe Mountain Tuff, and sediments and pyroclastic material deposited in the newly formed caldera basin, Early sedimentation is interpreted to have been rapid, and to have occurred in volcaniclastic fan environments at CCM-1 and in a variery of volcaniclastic fan, braided stream shallow lacustrine, and mudflat environments at CCM-2. After an initial period of lake-level rise, suspension settling, turbidite, and debris-flow sedimentation occurred in lacustrine slope and basin environments below wave base. Carbonate sedimentation was initially sporadic, but more continuous in the latter part of the recorded lake history (after the H fallout tuff). Sublacustrine-fan deposition occurred at CCM-1 after a pronounced lake-level fall and subsequent rise that preceded the H tuff. Variations in density, neutron, gamma-ray, sonic, and electrical properties of deposits penetrated oin the two holes reflect variations in lithology, porosity, and alteration. Trends in the geophysical properties of the lacustrine strata are linked to downhole changes in authigenic mineralology and a decrease in porosity interpreted to have resulted primarily from diagenesis. Lithological and geophysical characteristics provide a basis for correlation of the cores; however, mineralogical methods of correlation are hampered by the degree of diagenesis and alteration.

Colorado↗