USGS ScienceSearch

Geology topics

D.E. McNamara

Publications and source records attributed to D.E. McNamara.

11 recordsLinked to original sources

Quantifying the influence of sea ice on ocean microseism using observations from the Bering Sea, Alaska

Microseism is potentially affected by all processes that alter ocean wave heights. Because strong sea ice prevents large ocean waves from forming, sea ice can therefore significantly affect microseism amplitudes. Here we show that this link between sea ice and microseism is not only a robust one but can be quantified. In particular, we show that 75–90% of the variability in microseism power in the Bering Sea can be predicted using a fairly crude model of microseism damping by sea ice. The success of this simple parameterization suggests that an even stronger link can be established between the mechanical strength of sea ice and microseism power, and that microseism can eventually be used to monitor the strength of sea ice, a quantity that is not as easily observed through other means.

Alaska

Seismically observed seiching in the Panama Canal

A large portion of the seismic noise spectrum is dominated by water wave energy coupled into the solid Earth. Distinct mechanisms of water wave induced ground motions are distinguished by their spectral content. For example, cultural noise is generally <1 s period, microseisms dominate the seismic spectrum from periods of 2 to 20 s, and the Earth's "hum" is in the range of 50 to 600 s. We show that in a large lake in the Panama Canal there is an additional source of long-period noise generated by standing water waves, seiches, induced by disturbances such as passing ships and wind pressure. We compare seismic waveforms to water level records and relate these observations to changes in local tilt and gravity due to an oscillating seiche. The methods and observations discussed in this paper provide a first step toward quantifying the impact of water inundation as recorded by seismometers. This type of quantified understanding of water inundation will help in future estimates of similar phenomena such as the seismic observations of tsunami impact. Copyright 2011 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth

Temporal variations in Global Seismic Stations ambient noise power levels

Recent concerns about time-dependent response changes in broadband seismometers have motivated the need for methods to monitor sensor health at Global Seismographic Network (GSN) stations. We present two new methods for monitoring temporal changes in data quality and instrument response transfer functions that are independent of Earth seismic velocity and attenuation models by comparing power levels against different baseline values. Our methods can resolve changes in both horizontal and vertical components in a broad range of periods (∼0.05 to 1,000 seconds) in near real time. In this report, we compare our methods with existing techniques and demonstrate how to resolve instrument response changes in long-period data (>100 seconds) as well as in the microseism bands (5 to 20 seconds). High quality broadband data recorded by the GSN are fundamental to characterizing a wide range of Earth science issues including: the size and rupture of large earthquakes ( e.g. , Tsai et al. 2005 ); imaging the interior of the Earth ( e.g. , Van der Hilst et al. 1997 ); tracking global climate variation ( Aster et al. 2008 ); and monitoring calving glaciers (Ekström et al. 2003 , 2006a ). Recent studies based on theoretical Earth models ( Ekström et al. 2006b ; Davis and Berger 2007 ) suggest that broadband seismometer gain levels can vary with time. This has also been confirmed, for the STS-1 sensor, experimentally ( Yuki and Ishihara 2002 ). It therefore has become necessary to systematically check for temporal changes in amplitude at GSN stations. Many of these changes are frequency-dependent in nature and not a priori predictable ( Ekström et al. 2006b ). Robust methods that can be applied to a large number of stations in a broad range of frequency bands are necessary.

Seismological Research Letters

Multidecadal climate-induced variability in microseisms

Microseisms are the most ubiquitous continuous seismic signals on Earth at periods between approximately 5 and 25 s (Peterson 1993; Kedar and Webb 2005). They arise from atmospheric energy converted to (primarily) Rayleigh waves via the intermediary of wind-driven oceanic swell and occupy a period band that is uninfluenced by common anthropogenic and wind-coupled noise processes on land (Wilson et al. 2002; de la Torre et al. 2005). "Primary" microseisms (near 8-s period) are generated in shallow water by breaking waves near the shore and/or the nonlinear interaction of the ocean wave pressure signal with the sloping sea floor (Hasselmann 1963). Secondary microseisms occur at half of the primary period and are especially strongly radiated in source regions where opposing wave components interfere (Longuett-Higgins 1950; Tanimoto 2007), which principally occurs due to the interaction of incident swell and reflected/scattered wave energy from coasts (Bromirski and Duennebier 2002; Bromirski, Duennebier, and Stephen 2005). Coastal regions having a narrow shelf with irregular and rocky coastlines are known to be especially efficient at radiating secondary microseisms (Bromirski, Duennebier, and Stephen 2005; Shulte-Pelkum et al. 2004). The secondary microseism is globally dominant, and its amplitudes proportional to the square of the standing wave height (Longuett-Higgins 1950), which amplifies its sensitivity to large swell events (Astiz and Creager 1994; Webb 2006).

Seismological Research Letters

Frequency-dependent Lg Q within the continental United States

Frequency-dependent crustal attenuation (1/ Q ) is determined for seven distinct physiographic/tectonic regions of the continental United States using high-quality Lg waveforms recorded on broadband stations in the frequency band 0.5 to 16 Hz. Lg attenuation is determined from time-domain amplitude measurements in one-octave frequency bands centered on the frequencies 0.75, 1.0, 3.0, 6.0, and 12.0 Hz. Modeling errors are determined using a delete-j jackknife resampling technique. The frequency-dependent quality factor is modeled in the form of Q = Q 0 f η. Regions were initially selected based on tectonic provinces but were eventually limited and adjusted to maximize ray path coverage in each area. Earthquake data was recorded on several different networks and constrained to events occurring within the crust (<40 km depth) and at least m b 3.5 in size. A singular value decomposition inversion technique was applied to the data to simultaneously solve for source and receiver terms along with Q for each region at specific frequencies. The lowest crustal Q was observed in northern and southern California where Q is described by the functions Q = 152(±37) f 0.72(±0.16) and Q = 105(±26) f 0.67(±0.16) , respectively. The Basin and Range Province, Pacific Northwest, and Rocky Mountain states also display lower Q and a strong frequency dependence characterized by the functions Q = 200(±40) f 0.68(±0.12) , Q = 152(±49) f 0.76(±0.18) , and Q = 166(±37) f 0.61(±0.14) , respectively. In contrast, in the central and northeast United States Q functions are Q = 640(±225) f 0.344(±0.22) and Q = 650(±143) f 0.36(±0.14) , respectively, show a high crustal Q and a weaker frequency dependence. These results improve upon previous Lg modeling by subdividing the United States into smaller, distinct tectonic regions and using significantly more data that provide improved constraints on frequency-dependent attenuation and errors. A detailed attenuation map of the continental United States can provide significant input into hazard map mitigation. Both scattering and intrinsic attenuation mechanisms are likely to play a comparable role in the frequency range considered in the study.

Bulletin of the Seismological Society of America

Seismological evidence for a sub-volcanic arc mantle wedge beneath the Denali volcanic gap, Alaska

Arc volcanism in Alaska is strongly correlated with the 100 km depth contour of the western Aluetian Wadati-Benioff zone. Above the eastern portion of the Wadati-Benioff zone however, there is a distinct lack of volcanism (the Denali volcanic gap). We observe high Poisson's ratio values (0.29-0.33) over the entire length of the Alaskan subduction zone mantle wedge based on regional variations of Pn and Sn velocities. High Poisson's ratios at this depth (40-70 km), adjacent to the subducting slab, are attributed to melting of mantle-wedge peridotites, caused by fluids liberated from the subducting oceanic crust and sediments. Observations of high values of Poisson's ratio, beneath the Denali volcanic gap suggest that the mantle wedge contains melted material that is unable to reach the surface. We suggest that its inability to migrate through the overlying crust is due to increased compression in the crust at the northern apex of the curved Denali fault.

Alaska

Mapping crustal heterogeneity using Lg propagation efficiency throughout the Middle East, Mediterranean, Southern Europe and Northern Africa

In this paper we describe a technique for mapping the lateral variation of Lg characteristics such as Lg blockage, efficient Lg propagation, and regions of very high attenuation in the Middle East, North Africa, Europe and the Mediterranean regions. Lg is used in a variety of seismological applications from magnitude estimation to identification of nuclear explosions for monitoring compliance with the Comprehensive Nuclear-Test-Ban Treaty (CTBT). These applications can give significantly biased results if the Lg phase is reduced or blocked by discontinuous structure or thin crust. Mapping these structures using quantitative techniques for determining Lg amplitude attenuation can break down when the phase is below background noise. In such cases Lg blockage and inefficient propagation zones are often mapped out by hand. With our approach, we attempt to visually simplify this information by imaging crustal structure anomalies that significantly diminish the amplitude of Lg. The visualization of such anomalies is achieved by defining a grid of cells that covers the entire region of interest. We trace Lg rays for each event/ station pair, which is simply the great circle path, and attribute to each cell a value equal to the maximum value of the Lg/P-coda amplitude ratio for all paths traversing that particular cell. The resulting map, from this empirical approach, is easily interpreted in terms of crustal structure and can successfully image small blockage features often missed by analysis of raypaths alone. This map can then be used to screen out events with blocked Lg prior to performing Q tomography, and to avoid using Lg-based methods of event identification for the CTBT in regions where they cannot work. For this study we applied our technique to one of the most tectonically complex regions on the earth. Nearly 9000 earthquake/station raypaths, traversing the vast region comprised of the Middle East, Mediterranean, Southern Europe and Northern Africa, have been analyzed. We measured the amplitude of Lg relative to the P-coda and mapped the lateral variation of Lg propagation efficiency. With the relatively dense coverage provided by the numerous crossing paths we are able to map out the pattern of crustal heterogeneity that gives rise to the observed character of Lg propagation. We observe that the propagation characteristics of Lg within the region of interest are very complicated but are readily correlated with the different tectonic environments within the region. For example, clear strong Lg arrivals are observed for paths crossing the stable continental interiors of Northern Africa and the Arabian Shield. In contrast, weakened to absent Lg is observed for paths crossing much of the Middle East, and Lg is absent for paths traversing the Mediterranean. Regions that block Lg transmission within the Middle East are very localized and include the Caspian Sea, the Iranian Plateau and the Red Sea. Resolution is variable throughout the region and strongly depends on the distribution of seismicity and recording stations. Lg propagation is best resolved within the Middle East where regions of crustal heterogeneity on the order of 100 km are imaged (e.g., South Caspian Sea and Red Sea). Crustal heterogeneity is resolvable but is poorest in seismically quiescent Northern Africa.

Pure and Applied Geophysics

Frequency dependent Lg attenuation in south-central Alaska

The characteristics of seismic energy attenuation are determined using high frequency Lg waves from 27 crustal earthquakes, in south-central Alaska. Lg time-domain amplitudes are measured in five pass-bands and inverted to determine a frequency-dependent quality factor, Q( f ), model for south-central Alaska. The inversion in this study yields the frequency-dependent quality factor, in the form of a power law: Q( f ) = Q 0 f &eta; = 220(&plusmn;30) f 0.66(&plusmn;0.09) (0.75&le; f &le;12Hz). The results from this study are remarkably consistent with frequency dependent quality factor estimates, using local S-wave coda, in south-central Alaska. The consistency between S -coda Q( f ) and Lg Q( f ) enables constraints to be placed on the mechanism of crustal attenuation in south-central Alaska. For the range of frequencies considered in this study both scattering and intrinsic attenuation mechanisms likely play an equal role.

Geophysical Research Letters