Geology topics

D.C. Noe

Publications and source records attributed to D.C. Noe.

4 recordsLinked to original sources

USGS2024

Geologic control of severe expansive clay damage to a subdivision in the Pierre Shale, southwest Denver metropolitan area, Colorado

Shortly after construction of a subdivision in the southwest Denver metropolitan area in 1986, a portion of the subdivision built directly on steeply-dipping strata of the Pierre Shale began experiencing damaging differential movements, causing house foundations to fail and pavements to warp and crack. This formation is a Late Cretaceous marine clay-shale composed predominantly of fluvial mixed-layer illite/smectite and quartz. During deposition of the shale, periodic and explosive volcanism generated thin beds of bentonite, consisting initially of volcanic ash and subsequently altered to nearly pure smectite. Some of these bentonite beds were exposed in a trench adjacent to the subdivision and perpendicular to the strike of the steeply-dipping strata. The thickest bentonite beds correlated well with linear heave features that these beds parallel the bedrock strike throughout the subdivision were mapped via severely deformed pavements. Mineralogical data show the bentonite bed that correlates with the worst damage within the subdivision consists of about 62% smectite by weight with mixed-layer illite/smectite expandability of 92%. By comparison, a sample of the typical silty claystone, which is fluvial mixed-layer illite/smectite mixed with detrital quartz from the adjacent strata, had about 23% smectite by weight with 70% to 90% illite/smectite expandability. Geotechnical tests for swell potential show that samples of 2 bentonite beds swelled 39% to 43% compared to 2% to 8% for samples of the typical silty claystone. It is proposed that differential swell resulting from stratigraphically-controlled differences in clay mineralogy and grain-size is the primary factor controlling extreme damage for this geologic setting.

Clays and Clay Minerals↗

USGS2009

Use of OSL dating to establish the stratigraphic framework of Quaternary eolian sediments, Anton scarp upper trench, Northeastern Colorado High Plains, USA

This paper contains the results of the optically stimulated luminescence (OSL) dating used to establish stratigraphic ages and relationships of eolian sediments in a trench in northeastern Colorado, USA. This trench was located in the upper face of the Anton scarp, a major topographic lineament trending NW-SE for a distance of 135 km, in anticipation of intersecting near-surface faulting. The trench was 180 m long, 4.5-6.0 m deep, and exposed 22 m of stratigraphic section, most of which dipped gently west and was truncated by gulley channeling at the face of the scarp. No direct evidence of faulting was found in the upper trench. The stratigraphy from the trench was described, mapped and dated using OSL on quartz and potassium feldspar, and 14 C obtained from woody material. OSL dating identified two upper loess units as Peoria Loess and Gilman Canyon Loess, deposited between 16 and 30 ka ago. The bottom layers of the trench were substantially older, giving OSL ages in excess of 100 ka. These older ages are interpreted as underestimates, owing to saturation of the fast component of OSL. Using OSL and 14 C dating, we can constrain the erosion and down cutting of the scarp face as occurring between 16 and 5.7 ka. As the trenching investigation continues in other parts of the scarp face, the results of this preliminary study will be of importance in relating the ages of the strata that underlie different parts of the scarp, and in determining whether Quaternary faulting was a mechanism that contributed to the formation of this regional geomorphic feature.

Quaternary International↗

USGS2007

Steeply dipping heaving bedrock, Colorado: Part 1 - Heave features and physical geological framework

Differentially heaving bedrock has caused severe damage near the Denver metropolitan area. This paper describes heave-feature morphologies, the underlying bedrock framework, and their inter-relationship. The heave features are linear to curvilinear and may attain heights of 0.7 m (2.4 ft), widths of 58 m (190 ft), and lengths of 1,067 m (3,500 ft). They are nearly symmetrical to highly asymmetrical in cross section, with width-to-height ratios of 45:1 to 400:1, and most are oriented parallel with the mountain front. The bedrock consists of Mesozoic sedimentary formations having dip angles of 30 degrees to vertical to overturned. Mixed claystone-siltstone bedding sequences up to 36-m (118-ft) thick are common in the heave-prone areas, and interbeds of bentonite, limestone, or sandstone may be present. Highly fractured zones of weathered to variably weathered claystone extend to depths of 19.5 to 22.3 m (64 to 73 ft). Fracture spacings are 0.1 to 0.2 m (0.3 to 0.7 ft) in the weathered and variably weathered bedrock and up to 0.75 m (2.5 ft) in the underlying, unweathered bedrock. Curvilinear shear planes in the weathered claystone show thrust or reverse offsets up to 1.2 m (3.9 ft). Three associations between heave-feature morphologies and the geological framework are recognized: (1) Linear, symmetrical to asymmetrical heaves are associated with primary bedding composition changes. (2) Linear, highly asymmetrical heaves are associated with shear planes along bedding. (3) Curvi-linear, highly asymmetrical heaves are associated with bedding-oblique shear planes.

Environmental & Engineering Geoscience↗

USGS2000

Mineralogy-swelling potential relationships for expansive shales

The extent to which mineralogy and swelling potential is correlated in the expansive clays and shales is studied. Sites are selected in Cretaceous shales, including Pierre Shale, that are uplifted into steeply dipping strata near the foothills of the Rocky Mountains. Swelling potentials are obtained on limited suites of samples with conventional and labor-intensive schemes including Seed and Chen's schemes, and with swell-consolidation measurements in response to saturation, consolidation, and rebound in an oedometer. The results showing the percent total smectite provide a useful index of swelling potential concept defined by Seed and correlates well with the swelling potential indices developed by Seed, Chen, and McKeen.

Conference Paper↗