USGS Science⌕ Search

Geology topics

D. R. Hutchinson

Publications and source records attributed to D. R. Hutchinson.

At least 19 recordsLinked to original sources
USGS2017

The origin and distribution of subbottom sediments in southern Lake Champlain

Three units, correlatable with recent Lake Champlain, late-glacial marine Champlain Sea, and proglacial Lake Vermont sediments, have been identified from about 200 km of high-resolution seismic reflection profiles and eight piston cores collected in southern Lake Champlain. Lake Vermont deposits are nonfossiliferous and range from thin to absent nearshore and on bedrock highs to more than 126 m thick near Split Rock Point. Champlain Sea sediments contain marine foraminifers and ostracodes and are fairly uniform in thickness (20–30 m). Recent Lake Champlain sediments range in thickness from 0 to 25 m. Average sedimentation rates for Lake Vermont are considerably higher (4–8 cm/yr) than those for the Champlain Sea (0.8–1.2 cm/yr) and Lake Champlain (0.14–0.15 cm/yr). Bedrock, till, and deltaic and alluvial deposits were also identified on the acoustic records but were not sampled. An unconformity separating Champlain Sea deposits from Lake Champlain deposits is associated with numerous benches at water depths of 20–30 m. These benches, the alluvial deposits, and the onset of deltaic deposition are probably associated with a low water level stillstand at the close of the Champlain Sea episode.

New York, Vermont↗
USGS2017

The sedimentary framework of the southern basin of Lake George, New York

Information from 240 km of high-resolution seismic reflection profiles has been analyzed to show the bathymetric and subsurface configuration of southern Lake George in the southeastern corner of the Adirondack Mountains, New York. Three units have been identified and sampled in 13 piston cores as long as 7 m and 4 grab samples; they are glacial drift, glaciolacustrine nonorganic clay, and Holocene lake mud rich in organic material. Three deep bedrock basins controlled glacial, glaciolacustrine, and postglacial deposition within the lake. Glaciolacustrine clay is more than 30 m thick in these basins but is generally absent in water depths less than 20 m. An unconformity separates glaciolacustrine clay from overlying Holocene mud in water depths less than 30 m, but the contact is conformable and transitional in deeper water. The unconformity may have originated from subaqueous or subaerial erosion during a low stage of lake level which probably occurred between 10,000 and 700 yr B.P. Holocene lake mud is thin to absent in the shallower waters separating the three basins, but reaches 15-m thickness near the entrance to The Narrows. A new radiocarbon date of 6950 ?? 60 yr B.P. was obtained from a wood fragment which was found in the Holocene lake mud. We found no clear evidence of postglacial tectonic disturbances of the lake sediments although recent releveling profiles suggest that the Adirondack Mountains are undergoing contemporary uplift.

New York↗
USGS2012

Keweenaw hot spot: Geophysical evidence for a 1.1 Ga mantle plume beneath the Midcontinent Rift System

The Proterozoic Midcontinent Rift System of North America is remarkably similar to Phanerozoic rifted continental margins and flood basalt provinces. Like the younger analogues, the volcanism within this older rift can be explained by decompression melting and rapid extrusion of igneous material during lithospheric extension above a broad, asthenospheric, thermal anomaly which we call the Keweenaw hot spot. Great Lakes International Multidisciplinary Program on Crustal Evolution seismic reflection profiles constrain end-member models of melt thickness and stretching factors, which yield an inferred mantle potential temperature of 1500°–1570°C during rifting. Combined gravity modeling and subsidence calculations are consistent with stretching factors that reached 3 or 4 before rifting ceased, and much of the lower crust beneath the rift consists of relatively high density intruded or underplated synrift igneous material. The isotopic signature of Keweenawan volcanic rocks, presented in a companion paper by Nicholson and Shirey (this issue), is consistent with our model of passive rifting above an asthenospheric mantle plume.

Midcontinent Rift System↗
USGS2010

The North American Midcontinent rift beneath Lake Superior from GLIMPCE seismic reflection profiling

The Midcontinent rift system is a 1.1-b.y.-old structure extending from Kansas, through the Lake Superior region, and into southern Michigan. The rift is filled with thick sequences of basaltic volcanic rocks and clastic sediments. For most of its extent it is buried beneath Paleozoic rocks but can be traced by its strong gravity and magnetic anomalies. The rocks of the rift system are exposed only in the Lake Superior region and comprise the Keweenawan Supergroup. Much of the geology of the Keweenawan is beneath Lake Superior and has only been inferred from potential field studies and seismic refraction studies and extrapolation from on-shore geology. Seismic reflection surveys by the Great Lakes International Multidisciplinary Program on Crustal Evolution in 1986 imaged much of the deep structure of the rift beneath the lake in detail. The reflection profiles across the rift reveal a deep, asymmetrical central graben whose existence and magnitude was not previously documented. They show that, in addition to crustal sagging documented by previous investigations, normal faulting played a major role in subsidence of the axial region of the rift. A sequence of volcanic and sedimentary rocks, in places greater than 30 km thick, fills the graben. Thinner volcanic and sedimentary units lie on broad flanks of the rift outside of the graben. Near the axis, the prerift crust is thinned to about one fourth of its original thickness, apparently by a combination of low-angle extensional faulting and ductile stretching or distributed shear. The sense of asymmetry of the central graben changes along the trend of the rift, documenting the segmented nature of the structure and suggesting the existence of accommodation zones between the segments. The location of the accommodation zones is inferred from abrupt disruptions in the Bouguer gravity signature of the rift. Uplift of the central graben occurred when the original graben-bounding normal faults were reactivated as high-angle reverse faults with throws of 5 km or more in places. The Midcontinent rift has some striking similarities to some younger passive continental margins. We propose that it preserves a record of nearly complete continental separation which, had it not been arrested, would have created a Middle Proterozoic ocean basin.

Lake Superior↗
USGS2008

Geologic framework of the 2005 Keathley Canyon gas hydrate research well, northern Gulf of Mexico

The Keathley Canyon sites drilled in 2005 by the Chevron Joint Industry Project are located along the southeastern edge of an intraslope minibasin (Casey basin) in the northern Gulf of Mexico at 1335 m water depth. Around the drill sites, a grid of 2D high-resolution multichannel seismic data designed to image depths down to at least 1000 m sub-bottom reveals 7 unconformities and disconformities that, with the seafloor, bound 7 identifiable seismic stratigraphic units. A major disconformity in the middle of the units stands out for its angular baselapping geometry. From these data, three episodes of sedimentary deposition and deformation are inferred. The oldest episode consists of fine-grained muds deposited during a period of relative stability in the basin (units e, f, and g). Both the BSR and inferred gas hydrate occur within these older units. The gas hydrate occurs in near-vertical fractures. A second episode (units c and d) involved large vertical displacements associated with infilling and ponding of sediment. This second interval corresponds to deposition of intercalated fine and coarse-grained material that was recovered in the drill hole that penetrated the thin edges of the regionally much thicker units. The final episode of deposition (units a and b) occurred during more subdued vertical motions. Hemipelagic drape (unit a) characterizes the modern seafloor. The present-day Casey basin is mostly filled. Its sill is part of a subsiding graben structure that is only 10-20 m shallower than the deepest point in the basin, indicating that gravity-driven transport would mostly bypass the basin. Contemporary faulting along the basin margins has selectively reactivated an older group of faults. The intercalated sand and mud deposits of units c and d are tentatively correlated with Late Pleistocene deposition derived from the western shelf-edge delta/depocenter of the Mississippi River, which was probably most active from 320 ka to 70 ka [Winker, C.D., Booth, J., 2000. Sedimentary dynamics of the salt-dominated continental slope, Gulf of Mexico: integration of observations from the seafloor, near-surface, and deep subsurface. In: Proceedings of the GCSSEPM Foundation 20th Annual Research Conference, Deep-water Reservoirs of the World, pp. 1059-1086]. The presence of sand within the gas hydrate stability zone (in units c and d) is not sufficient to concentrate gas hydrate even though dispersed gas hydrate occurs deeper in the fractured mud/clay-rich sections of units e and f.

Gulf of Mexico↗
USGS2008

Gas and gas hydrate distribution around seafloor seeps in Mississippi Canyon, Northern Gulf of Mexico, using multi-resolution seismic imagery

To determine the impact of seeps and focused flow on the occurrence of shallow gas hydrates, several seafloor mounds in the Atwater Valley lease area of the Gulf of Mexico were surveyed with a wide range of seismic frequencies. Seismic data were acquired with a deep-towed, Helmholz resonator source (220-820 Hz); a high-resolution, Generator-Injector air-gun (30-300 Hz); and an industrial air-gun array (10-130 Hz). Each showed a significantly different response in this weakly reflective, highly faulted area. Seismic modeling and observations of reversed-polarity reflections and small scale diffractions are consistent with a model of methane transport dominated regionally by diffusion but punctuated by intense upward advection responsible for the bathymetric mounds, as well as likely advection along pervasive filamentous fractures away from the mounds.

Marine and Petroleum Geology↗
USGS2008

Assessing sulfate reduction and methane cycling in a high salinity pore water system in the northern Gulf of Mexico

Pore waters extracted from 18 piston cores obtained on and near a salt-cored bathymetric high in Keathley Canyon lease block 151 in the northern Gulf of Mexico contain elevated concentrations of chloride (up to 838 mM) and have pore water chemical concentration profiles that exhibit extensive departures (concavity) from steady-state (linear) diffusive equilibrium with depth. Minimum ??13C dissolved inorganic carbon (DIC) values of -55.9??? to -64.8??? at the sulfate-methane transition (SMT) strongly suggest active anaerobic oxidation of methane (AOM) throughout the study region. However, the nonlinear pore water chemistry-depth profiles make it impossible to determine the vertical extent of active AOM or the potential role of alternate sulfate reduction pathways. Here we utilize the conservative (non-reactive) nature of dissolved chloride to differentiate the effects of biogeochemical activity (e.g., AOM and/or organoclastic sulfate reduction) relative to physical mixing in high salinity Keathley Canyon sediments. In most cases, the DIC and sulfate concentrations in pore waters are consistent with a conservative mixing model that uses chloride concentrations at the seafloor and the SMT as endmembers. Conservative mixing of pore water constituents implies that an undetermined physical process is primarily responsible for the nonlinearity of the pore water-depth profiles. In limited cases where the sulfate and DIC concentrations deviated from conservative mixing between the seafloor and SMT, the ??13C-DIC mixing diagrams suggest that the excess DIC is produced from a 13C-depleted source that could only be accounted for by microbial methane, the dominant form of methane identified during this study. We conclude that AOM is the most prevalent sink for sulfate and that it occurs primarily at the SMT at this Keathley Canyon site.

Marine and Petroleum Geology↗
USGS2007

Regional stratigraphic framework of surficial sediments and bedrock beneath Lake Ontario

Approximately 2550 km of single-channel high-resolution seismic reflection profiles have been interpreted and calibrated with lithological and geochronological information from four representative piston cores and one grab sample to provide a regional stratigraphie framework for the subbottom deposits of Lake Ontario. Five units overlying Paleozoic bedrock were identified and mapped. These are classified as informal units and represent, from oldest to youngest: (A) subglacial till (?) deposited by the Port Huron ice at the end of the Wisconsin glaciation; (B) an ice-marginal (?) unit confined to the western part of the lake that was probably deposited during retreat of the Port Huron ice shortly after 13 ka; (C) a regionally extensive unit of laminated glacio-lacustrine clay that accumulated until about 11 ka; (D) a weakly laminated to more massive lake clay deposited during a period of reduced water supply and rising water levels after the drawdown of the high-level glacial lakes (Iroquois and successors); and (E) modern lake clay less than 10 m thick that began accumulating around 6-8 ka with the subsequent return of upper Great Lakes drainage through the Ontario basin. Seismic reflections also define the configuration of the bedrock surface and pre-glacial stream valleys incised in the bedrock surface. Several anomalous bottom and subbottom features in the surficial sediments are mapped, such as discontinuous and offset reflections, furrows, gas pockets, and areas of large subbottom relief. None of these features appear to be spatially correlative with the diffuse seismicity that characterizes the lake area or with deeper structures such as Paleozoic bedrock faults or crustal-penetrating faults in the Precambrian basement.

Lake Ontario↗
USGS2003

Seismic anisotropy in gas-hydrate- and gas-bearing sediments on the Blake Ridge, from a walkaway vertical seismic profile

We present results from an analysis of anisotropy in marine sediments using walkaway vertical seismic profiles from the Blake Ridge, offshore South Carolina. We encountered transverse isotropy (TI) with a vertical symmetry axis in a gas-hydrate-bearing unit of clay and claystone with Thomsen parameters ?? = 0.05 ?? 0.02 and ?? = 0.04 ?? 0.06. TI increased to ?? = 0.16 ?? 0.04 and ?? = 0.19 ?? 0.12 in the underlying gas zone. Rock physics modeling suggests that the observed TI is caused by a partial alignment of clay particles rather than high-velocity gas-hydrate veins. Similarly, the increase of TI in the gas zone is not caused by thin low-velocity gas layers but rather, we speculate, by the sharp contrast between seismic properties of an anisotropic sediment frame and elongated gas-bearing pore voids. Our results underscore the significance of anisotropy for integrating near-vertical and wide-angle seismic data.

Geophysical Research Letters↗
USGS2001

Geology of the Woods Hole area, Massachusetts; the story behind the landscape

The geologic story of the Woods Hole area, Cape Cod, Mass., was written by glacial ice during the last ice age and edited by the ocean waves. If you learn to read today's landscape, you can see the fascinating history it records. The features of Cape Cod, from the ponds and cranberry bogs to the gently sloping sandy uplands and rocky, irregular hills to the beaches, result from the glacial processes that built the cape and the marine processes that still shape it. Many geologists since the late 19th century have contributed to telling this story. The U.S. Geological Survey has studied the geology of Cape Cod in order to provide people with objective scientific data that can be applied to wise stewardship of the land and coasts.

Fact Sheet↗
USGS2000

Stratigraphic and structural evolution of the Selenga Delta Accommodation Zone, Lake Baikal Rift, Siberia

Seismic reflection profiles from the Lake Baikal Rift reveal extensive details about the sediment thickness, structural geometry and history of extensional deformation and syn-rift sedimentation in this classic continental rift. The Selenga River is the largest single source of terrigenous input into Lake Baikal, and its large delta sits astride the major accommodation zone between the Central and South basins of the lake. Incorporating one of the world's largest lacustrine deltas, this depositional system is a classic example of the influence of rift basin structural segmentation on a major continental drainage. More than 3700 km of deep basin-scale multi-channel seismic reflection (MCS) data were acquired during the 1989 Russian and the 1992 Russian–American field programs. The seismic data image most of the sedimentary section, including pre-rift basement in several localities. The MCS data reveal that the broad bathymetric saddle between these two major half-graben basins is underlain by a complex of severely deformed basement blocks, and is not simply a consequence of long-term deltaic deposition. Maximum sediment thickness is estimated to be more than 9 km in some areas around the Selenga Delta. Detailed stratigraphic analyses of the Selenga area MCS data suggest that modes of deposition have shifted markedly during the history of the delta. The present mode of gravity- and mass-flow sedimentation that dominates the northern and southern parts of the modern delta, as well as the pronounced bathymetric relief in the area, are relatively recent developments in the history of the Lake Baikal Rift. Several episodes of major delta progradation, each extending far across the modern rift, can be documented in the MCS data. The stratigraphic framework defined by these prograding deltaic sequences can be used to constrain the structural as well as depositional evolution of this part of the Baikal Rift. An age model has been established for this stratigraphy, by tying the delta sequences to the site of the Baikal Drilling Project 1993 Drill Hole. Although the drill hole is only 100 m deep, and the base of the cores is only ∼670 ka in age, ages were extrapolated to deeper stratigraphic intervals using the Reflection-Seismic-Radiocarbon method of Cohen et al. (1993). The deep prograding delta sequences now observed in the MCS data probably formed in response to major fluctuations in sediment supply, rather than in response to shifts in lake level. This stratigraphic framework and age model suggest that the deep delta packages developed at intervals of approximately 400 ka and may have formed as a consequence of climate changes affiliated with the northern hemisphere glaciations. The stratigraphic analysis also suggests that the Selenga Basin and Syncline developed as a distinct depocentre only during the past ∼2–3 Ma.

Lake Baikal Rift↗
USGS1998

Comparative sequence stratigraphy of low-latitude versus high-latitude lacustrine rift basins: Seismic data examples from the East African and Baikal rifts

Lakes Baikal, Malawi and Tanganyika are the world's three largest rift valley lakes and are the classic modem examples of lacustrine rift basins. All the rift lakes are segmented into half-graben basins, and seismic reflection datasets reveal how this segmentation controls the filling of the rift basins through time. In the early stages of rifting, basins are fed primarily by flexural margin and axial margin drainage systems. At the climax of syn-rift sedimentation, however, when the basins are deeply subsided, almost all the margins are walled off by rift shoulder uplifts, and sediment flux into the basins is concentrated at accommodation zone and axial margin river deltas. Flexural margin unconformities are commonplace in the tropical lakes but less so in high-latitude Lake Baikal. Lake levels are extremely dynamic in the tropical lakes and in low-latitude systems in general because of the predominance of evaporation in the hydrologic cycle in those systems. Evaporation is minimized in relation to inflow in the high-latitude Lake Baikal and in most high-latitude systems, and consequently, major sequence boundaries tend to be tectonically controlled in that type of system. The acoustic stratigraphies of the tropical lakes are dominated by high-frequency and high-amplitude lake level shifts, whereas in high-latitude Lake Baikal, stratigraphic cycles are dominated by tectonism and sediment-supply variations.

Conference Paper↗
USGS1998

Evidence for faulting related to dissociation of gas hydrate and release of methane off the southeastern United States

This paper is part of the special publication Gas hydrates: relevance to world margin stability and climatic change (eds J.P. Henriet and J. Mienert). An irregular, faulted, collapse depression about 38 x 18 km in extent is located on the crest of the Blake Ridge offshore from the south- eastern United States. Faults disrupt the sea floor and terminate or sole out about 40-500 m below the sea floor at the base of the gas hydrate stable zone, which is identified from the location of the bottom simulating reflection (BSR). Normal faults are common but reverse faults and folds also are widespread. Folds commonly convert upward into faults. Sediment diapirs and deposits of sediments that were erupted onto the sea floor are also present. Sea-floor depressions at faults may represent locations of liquid/gas vents. The collapse was probably caused by overpressures and by the decoupling of the overlying sediments by gassy muds that existed just beneath the zone of gas hydrate stability.

Blake Ridge↗
USGS1997

Geophysical database of the east coast of the United States; southern Atlantic margin, stratigraphy and velocity in map grids

In 1990, the Naval Oceanographic Office and the U.S. Geological Survey agreed to develop a digital data base of stratigraphy and acoustic properties of sediments along the U.S. East Coast of the United States. The objective of this work was to utilize more than 25,000 km of publicly available multichannel seismic-reflection profiles (Sheridan et al., 1988) in order to assign acoustic properties to the continental margin postrift sediments in an internally consistent, geologically meaningful, regionally extensive, digital form. The acoustic properties of interest include thickness, depth, compressional- and shear-wave velocity, compressional- and shear-wave attenuation, density, and lithology. This data base subdivides the 0- to 14-km thick Jurassic and younger postrift deposits into 18 mappable horizons. The spatial scale of gridding is 5' latitude by 5 ' longitude, or about 9x8 km. This report describes the second part of developing the data base for the continental margin between Florida and Cape Hatteras: spatial gridding of the digital stratigraphic and velocity data, derivative calculations of density, shear-wave velocity, and attenuation, and construction of the final data base. The first report (Hutchinson et al., 1995) describes how the stratigraphy and velocity were digitized from the original profiles. Complementary reports that describe the data base for the area between Cape Hatteras and Georges Bank are given in Klitgord and Schneider (1994) and Klitgord et al. (1994).

Open-File Report↗
USGS1997

Offset-vertical seismic profiling for marine gas hydrate exploration: Is it a suitable technique? First results from ODP Leg 164

Walkaway vertical seismic profiles were acquired during Ocean Drilling Project (ODP) Leg 164 at the Blake Ridge to investigate seismic properties of hydrate-bearing sediments and the zone of free gas beneath them. An evaluation of compressional (P-) wave arrivals Site 994 indicates P-wave anisotrophy in the sediment column. We identified several shear (S-) wave arrivals in the horizontal components of the geophone array in the borehole and in data recorded with an ocean bottom seismometer deployed at the seafloor. S-waves were converted from P-waves at several depth levels in the sediment column. One of the most prominent conversion points appears to be the bottom simulating reflector (BSR). It is likely that other conversion points are located in the zone of low P-wave reflectivity above the BSR. Modeling suggests that a change of the shear modulus is sufficient to cause significant shear conversion without a significant normal-incidence P-wave reflection.

North Carolina, South Carolina↗
USGS1996

Seismic velocities for hydrate-bearing sediments using weighted equation

A weighted equation based on the three-phase time-average and Wood equations is applied to derive a relationship between the compressional wave (P wave) velocity and the amount of hydrates filling the pore space. The proposed theory predicts accurate P wave velocities of marine sediments in the porosity range of 40-80% and provides a practical means of estimating the amount of in situ hydrate using seismic velocity. The shear (S) wave velocity is derived under the assumption that the P to S wave velocity ratio of the hydrated sediments is proportional to the weighted average of the P to S wave velocity ratios of the constituent components of the sediment. In the case that all constituent components are known, a weighted equation using multiphase time-average and Wood equations is possible. However, this study showed that a three-phase equation with modified matrix velocity, compensated for the clay content, is sufficient to accurately predict the compressional wave velocities for the marine sediments. This theory was applied to the laboratory measurements of the P and S wave velocities in permafrost samples to infer the amount of ice in the unconsolidated sediment. The results are comparable to the results obtained by repeatedly applying the two-phase wave scattering theory. The theory predicts that the Poisson's ratio of the hydrated sediments decreases as the hydrate concentration increases and the porosity decreases. In consequence, the amplitude versus offset (AVO) data for the bottom-simulating reflections may reveal positive, negative, or no AVO anomalies depending on the concentration of hydrates in the sediments.

Journal of Geophysical Research B: Solid Earth↗