Geology topics

Christopher S. Hitchcock

Publications and source records attributed to Christopher S. Hitchcock.

5 recordsLinked to original sources

USGS2020

Documentation of Surface Fault Rupture and Ground‐Deformation Features Produced by the 4 and 5 July 2019 Mw 6.4 and Mw 7.1 Ridgecrest Earthquake Sequence

The M w "> M w Mw 6.4 and M w "> M w Mw 7.1 Ridgecrest earthquake sequence occurred on 4 and 5 July 2019 within the eastern California shear zone of southern California. Both events produced extensive surface faulting and ground deformation within Indian Wells Valley and Searles Valley. In the weeks following the earthquakes, more than six dozen scientists from government, academia, and the private sector carefully documented the surface faulting and ground‐deformation features. As of December 2019, we have compiled a total of more than 6000 ground observations; approximately 1500 of these simply note the presence or absence of fault rupture or ground failure, but the remainder include detailed descriptions and other documentation, including tens of thousands of photographs. More than 1100 of these observations also include quantitative field measurements of displacement sense and magnitude. These field observations were supplemented by mapping of fault rupture and ground‐deformation features directly in the field as well as by interpreting the location and extent of surface faulting and ground deformation from optical imagery and geodetic image products. We identified greater than 68 km of fault rupture produced by both earthquakes as well as numerous sites of ground deformation resulting from liquefaction or slope failure. These observations comprise a dataset that is fundamental to understanding the processes that controlled this earthquake sequence and for improving earthquake hazard estimates in the region. This article documents the types of data collected during postearthquake field investigations, the compilation effort, and the digital data products resulting from these efforts.

California↗

USGS2020

Surface displacement distributions for the July 2019 Ridgecrest, California earthquake ruptures

Surface rupture in the 2019 Ridgecrest, California, earthquake sequence occurred along two orthogonal cross faults and includes dominantly left‐lateral and northeast‐striking rupture in the M w "> M w 6.4 foreshock and dominantly right‐lateral and northwest‐striking rupture in the M w "> M w 7.1 mainshock. We present > 650 "> > 650 field‐based, surface‐displacement observations for these ruptures and synthesize our results into cumulative along‐strike displacement distributions. Using these data, we calculate displacement gradients and compare our results with historical strike‐slip ruptures in the eastern California shear zone. For the M w "> M w 6.4 rupture, we report 96 displacements measured along 18 km of northeast‐striking rupture. Cumulative displacement curves for the rupture yield a mean left‐lateral displacement of 0.3–0.5 m and maximum of 0.7–1.6 m. Net mean vertical displacement based on the difference of down‐to‐the‐west (DTW) and down‐to‐the‐east (DTE) displacement curves is close to zero (0.02 m DTW). The M w "> M w 6.4 displacement distribution shows that the majority of displacement occurred southwest of the intersection with the M w "> M w 7.1 rupture. The M w "> M w 7.1 rupture is northwest‐striking and 50 km long based on 576 field measurements. Displacement curves indicate a mean right‐lateral displacement of 1.2–1.7 m and a maximum of 4.3–7.0 m. Net vertical displacement in the rupture averages 0.3 m DTW. The M w "> M w 7.1 displacement distributions demonstrate that maximum displacement occurred along a 12‐km‐long portion of the fault near the M w "> M w 7.1 epicenter, releasing 66% of the geologically based seismic moment along 24% of the total rupture length. Using our displacement distributions, we calculate kilometer‐scale displacement gradients for the M w "> M w 7.1 rupture. The steepest gradients ( ⁠ ∼ 1 – 3    m / km "> ∼ 1 – 3 m / km ⁠ ) flank the 12‐km‐long region of maximum displacement. In contrast, gradients for the 1992 M w "> M w 7.3 Landers and 1999 M w "> M w 7.1 Hector Mine earthquakes are < 0.6    m / km "> < 0.6 m / km . Our displacement distributions are important for understanding the influence of cross‐fault rupture on M w "> M w 6.4 and 7.1 rupture length and displacement and will facilitate comparisons with distributions generated remotely and at broader scales.

California↗

USGS2019

Seismological, geological, and geotechnical engineering aspects of the 2018 MW 6.6 Hokkaido Eastern Iburi earthquake

The 2018 Hokkaido Eastern Iburi MW6.6 earthquake struck the southern coast of the north island of Japan in the early morning (3:08 AM JST) on September 6, 2018. The event had a hypocentral depth of 35 km, centered beneath the port city of Tomakomai. Extremely strong shaking with peak ground acceleration in excess of 0.5 g was felt in the communities directly north of Tomakomai, in the districts of Abira and Atsuma. There, a very high density of landslides occurred in pumices soil that affected the majority of slopes in the region above the floodplain. These landslides were typically a thin veneer of 1 to 3 m of recent (<9000 ybp) volcanic pumice mantling older Kawabata marine sedimentary rocks. The source of the pumice layers are recent eruptions from Mt. Tarumae, south of Shikotsu-ko Caldera lake. Several block megaslides were observed in the Kawabata marine unit. A flow failure resulting from soil collapse or liquefaction was observed in fill deposits placed in a residential community district of Kiyota ward in Sapporo. The community, Satozuka-1 is situated on a natural steep ravine that was filled with pumice soil to level construction area to a gently sloping landscape for housing construction. The flow failure consisted of lateral migration of soil from the upper slope regions of the community onto the surface of the lower community. The upper community topographically deflated as large quantities of fluidized soil flooded the lower streets.

Hokkaido↗

USGS2018

Framework geologic map and structure sections along the Bartlett Springs fault zone and adjacent area from Round Valley to Wilbur Springs, northern Coast Ranges, California

The geologic map and accompanying report describes the extent, complexity, architecture, and evolution of the Bartlett Springs Fault Zone between Clear Lake and Round Valley, California. This fault zone is the eastern-most known active member of the San Andreas transform margin in northern California. It is of particular interest for its apparent long-lived history as a Miocene and older subduction-margin fault that, more recently, was reactivated as an active, creeping member of the San Andreas Fault system. The northern part of the Bartlett Springs Fault Zone is apparently still influenced by subduction of the Gorda Plate beneath North America, but it also accommodates strike-slip displacement associated with interaction of the Pacific Plate with North America. South of the map area, the Bartlett Springs Fault Zone steps into and merges with active faults of the eastern San Francisco Bay region; to the north of the map area and Round Valley, the fault zone steps into several other fault zones that connect with offshore thrust faults of the Cascadia subduction margin. Adequate understanding of the geologic framework of this fault zone and its relation to crustal structure of the adjacent region is important for purposes of planning and upgrading hydro-electric and other infrastructure in northern California that is directly or indirectly impacted by active faulting.

California↗

USGS2016

Detailed mapping and rupture implications of the 1 km releasing bend in the Rodgers Creek Fault at Santa Rosa, northern California

Airborne light detection and ranging (lidar) topography reveals for the first time the trace of the Rodgers Creek fault (RCF) through the center of Santa Rosa, the largest city in the northern San Francisco Bay area. Vertical deformation of the Santa Rosa Creek floodplain expresses a composite pull‐apart basin beneath the urban cover that is part of a broader 1‐km‐wide right‐releasing bend in the fault. High‐resolution geophysical data illuminate subsurface conditions that may be responsible for the complex pattern of surface faulting, as well as for the distribution of seismicity and possibly for creep behavior. We identify a dense, magnetic basement body bounded by the RCF beneath Santa Rosa that we interpret as a strong asperity, likely part of a larger locked patch of the fault to the south. A local increase in frictional resistance associated with the basement body appears to explain (1) distributed fault‐normal extension above where the RCF intersects the body; (2) earthquake activity around the northern end of the body, notably the 1969 M L 5.6 and 5.7 events and aftershocks; and (3) creep rates on the RCF that are higher to the north of Santa Rosa than to the south. There is a significant probability of a major earthquake on the RCF in the coming decades, and earthquakes associated with the proposed asperity have the potential to release seismic energy into the Cotati basin beneath Santa Rosa, already known from damaging historical earthquakes to produce amplified ground shaking.

California↗