USGS Science⌕ Search

Geology topics

Christopher J. Potter

Publications and source records attributed to Christopher J. Potter.

At least 37 records · Page 2Linked to original sources
USGS2013

U.S. Geological Survey science for the Wyoming Landscape Conservation Initiative: 2011 annual report

This is the fourth report produced by the U.S. Geological Survey (USGS) for the Wyoming Landscape Conservation Initiative (WLCI) to detail annual work activities. In FY2011, there were 37 ongoing, completed, or new projects conducted under the five major multi-disciplinary science and technical-assistance activities: (1) Baseline Synthesis, (2) Targeted Monitoring and Research, (3) Data and Information Management, (4) Integration and Coordination, and (5) Decisionmaking and Evaluation. The four new work activities were (1) development of the Western Energy Citation Clearinghouse, a Web-based energy-resource database of references for literature and on-line resources focused on energy development and its effects on natural resources; (2) a study to support the Sublette County Conservation District in ascertaining potential water-quality impacts to the New Fork River from energy development in the Pinedale Anticline Project Area; (3) a study to test the efficacy of blending high-frequency temporal data provided by Moderate Resolution Imaging Spectroradiometer (MODIS) sensors and high-resolution Landsat data for providing the fine-resolution data required to evaluate habitat responses to management activities at the landscape level; and (4) a study to examine the seasonal water chemistry of Muddy Creek, including documenting salinity patterns and providing a baseline for assessing potential effects of energy and other development on water quality in the Muddy Creek watershed. Two work activities were completed in FY2011: (1) the assessment of rancher perceptions of energy development in Southwest Wyoming and (2) mapping aspen stands and conifer encroachment using classification and regression tree (CART) analysis for effectiveness monitoring. The USGS continued to compile data, develop geospatial products, and upgrade Web-based products in support of both individual and overall WLCI efforts, including (1) ranking and prioritizing proposed conservation projects, (2) developing the WLCI integrated assessment, (3) developing the WLCI 5-year Conservation Action Plan, and (4) continuing to upgrade the content and improve the functionality of the WLCI Web site. For the WLCI FY2012 annual report, a decision was made to greatly reduce the overall length of the annual report, which will be accomplished by simplifying the report format and focusing on the take-home messages of each work activity for WLCI partners.

Wyoming↗
USGS2011

Assessment of undiscovered oil and gas resources of the Cook Inlet region, south-central Alaska, 2011

The U.S. Geological Survey (USGS) recently completed a new assessment of undiscovered, technically recoverable oil and gas resources in the Cook Inlet region of south-central Alaska. Using a geology-based assessment methodology, the USGS estimates that mean undiscovered volumes of nearly 600 million barrels of oil, about 19 trillion cubic feet of natural gas, and 46 million barrels of natural gas liquids remain to be found in this area.

Alaska↗
USGS2011

U.S. Geological Survey Science for the Wyoming Landscape Conservation Initiative-2010 Annual Report

This is the third report produced by the U.S. Geological Survey (USGS) for the Wyoming Landscape Conservation Initiative (WLCI) to detail annual work activities. The first report described activities for 2007 and 2008, and the second report covered work activities for FY09. This third report covers work activities conducted in FY2010, and it continues the 2009 approach of reporting on all the individual activities to help give WLCI partners and other readers the full scope of what has been accomplished. New in this year's report is an additional section for each work activity that outlines the work planned for the following fiscal year. In FY2010, there were 35 ongoing/expanded, completed, or new projects conducted under the five major multi-disciplinary science and technical-assistance activities: (1) Baseline Synthesis; (2) Targeted Monitoring and Research; (3) Data and Information Management; (4) Integration and Coordination; and (5) Decisionmaking and Evaluation. The three new work activities were to (1) compile existing water data for the entire WLCI region and (2) develop regional curves (statistical models) for relating bankfull-channel geometry and discharge to drainages in the WLCI region, both of which will help guide long-term monitoring of water resources; and (3) initiate a groundwater-monitoring network to evaluate potential effects of energy-development activities on groundwater quality where groundwater is an important source of public/private water supplies. Results of the FY2009 work to develop methods for assessing soil organic matter and mercury indicated that selenium and arsenic levels may be elevated in the Muddy Creek Basin; thus, the focus of that activity was shifted in FY2010 to evaluate biogeochemical cycling of elements in the basin. In FY2010, two ongoing activities were expanded with the addition of more sampling plots: (a) the study of how greater sage-grouse (Centrocercus urophasianus) use vegetation-treatment areas (sites added to the Moxa Arch Natural Gas Development area) and (2) the study of cheatgrass (Bromus tectorum) occurrence in burn treatments of the Little Mountain Ecosystem. The activity that entails evaluating relationships between ungulate herbivory and fire on aspen (Populus tremuloides) recruitment also was expanded to include relationships between stand characteristics of and herbivory on aspen in various ecohydrological settings. The USGS continued compiling data and developing geospatial products from all of its WLCI activities to support (1) ranking and prioritizing of proposed conservation projects, (2) developing the WLCI Integrated Assessment, and (3) developing the WLCI 5-year Conservation Action Plan. Two activities were completed in FY2010: (1) the conceptual modeling and indicator selection for monitoring resource conditions across the WLCI region, and (2) the literature review on effects of oil and gas development in western regions of the United States, both of which are in the last stages of publication.

Open-File Report↗
USGS2010

U.S. Geological Survey Science for the Wyoming Landscape Conservation Initiative-2009 Annual Report

This is the second report produced by the U.S. Geological Survey (USGS) for the Wyoming Landscape Conservation Initiative (WLCI) to detail annual work activities. The first report described work activities for 2007 and 2008; this report covers work activities conducted in 2009. Important differences between the two reports are that (1) this report does not lump all the Effectiveness Monitoring activities together as last year's report did, which will allow WLCI partners and other readers to fully appreciate the scope and accomplishments of those activities, and (2) this report does not include a comprehensive appendix of the background details for each work activity. In 2009, there were 29 ongoing or completed activities, and there were 5 new work activities conducted under the 5 original major multi-disciplinary science and technical assistance activities: (1) Baseline Synthesis; (2) Targeted Monitoring and Research; (3) Data and Information Management; (4) Integration and Coordination; and (5) Decisionmaking and Evaluation. New work included (1) developing a soil-quality index, (2) developing methods for assessing levels of and relationships between mercury and soil organic matter, and (3) ascertaining element source, mobility, and fate. Additionally, (4) remotely sensed imagery was used to assess vegetation as an indicator of soil condition and geology, and (5) an Integrated Assessment (IA) was initiated to synthesize what has been learned about WLCI systems to date, and to develop associated decision tools, maps, and a comprehensive report.

Open-File Report↗
USGS2010

Death Valley regional groundwater flow system, Nevada and California: Hydrogeologic framework and transient groundwater flow model

A numerical three-dimensional (3D) transient groundwater flow model of the Death Valley region was developed by the U.S. Geological Survey for the U.S. Department of Energy programs at the Nevada Test Site and at Yucca Mountain, Nevada. Decades of study of aspects of the groundwater flow system and previous less extensive groundwater flow models were incorporated and reevaluated together with new data to provide greater detail for the complex, digital model. A 3D digital hydrogeologic framework model (HFM) was developed from digital elevation models, geologic maps, borehole information, geologic and hydrogeologic cross sections, and other 3D models to represent the geometry of the hydrogeologic units (HGUs). Structural features, such as faults and fractures, that affect groundwater flow also were added. The HFM represents Precambrian and Paleozoic crystalline and sedimentary rocks, Mesozoic sedimentary rocks, Mesozoic to Cenozoic intrusive rocks, Cenozoic volcanic tuffs and lavas, and late Cenozoic sedimentary deposits of the Death Valley regional groundwater flow system (DVRFS) region in 27 HGUs. Information from a series of investigations was compiled to conceptualize and quantify hydrologic components of the groundwater flow system within the DVRFS model domain and to provide hydraulic-property and head-observation data used in the calibration of the transient-flow model. These studies reevaluated natural groundwater discharge occurring through evapotranspiration (ET) and spring flow; the history of groundwater pumping from 1913 through 1998; groundwater recharge simulated as net infiltration; model boundary inflows and outflows based on regional hydraulic gradients and water budgets of surrounding areas; hydraulic conductivity and its relation to depth; and water levels appropriate for regional simulation of prepumped and pumped conditions within the DVRFS model domain. Simulation results appropriate for the regional extent and scale of the model were provided by acquiring additional data, by reevaluating existing data using current technology and concepts, and by refining earlier interpretations to reflect the current understanding of the regional groundwater flow system. Groundwater flow in the Death Valley region is composed of several interconnected, complex groundwater flow systems. Groundwater flow occurs in three subregions in relatively shallow and localized flow paths that are superimposed on deeper, regional flow paths. Regional groundwater flow is predominantly through a thick Paleozoic carbonate rock sequence affected by complex geologic structures from regional faulting and fracturing that can enhance or impede flow. Spring flow and ET are the dominant natural groundwater discharge processes. Groundwater also is withdrawn for agricultural, commercial, and domestic uses. Groundwater flow in the DVRFS was simulated using MODFLOW-2000, the U.S. Geological Survey 3D finitedifference modular groundwater flow modeling code that incorporates a nonlinear least-squares regression technique to estimate aquifer parameters. The DVRFS model has 16 layers of defined thickness, a finite-difference grid consisting of 194 rows and 160 columns, and uniform cells 1,500 meters (m) on each side. Prepumping conditions (before 1913) were used as the initial conditions for the transient-state calibration. The model uses annual stress periods with discrete recharge and discharge components. Recharge occurs mostly from infiltration of precipitation and runoff on high mountain ranges and from a small amount of underflow from adjacent basins. Discharge occurs primarily through ET and spring discharge (both simulated as drains) and water withdrawal by pumping and, to a lesser amount, by underflow to adjacent basins simulated by constant-head boundaries. All parameter values estimated by the regression are reasonable and within the range of expected values. The simulated hydraulic heads of the final calibrated transient model generally fit observed heads reasonably well (residuals with absolute values less than 10 meters) with two exceptions: in most areas of nearly flat hydraulic gradient the fit is considered moderate (residuals with absolute values of 10 to 20 meters), and in areas of steep hydraulic gradient along the Eleana Range and western part of Yucca Flat, southern part of the Owlshead Mountains, southern part of the Bullfrog Hills, and the north-northwestern part of the model domain (residuals with absolute values greater than 20 meters). Groundwater discharge residuals are fairly random, with as many areas where simulated flows are less than observed flows as areas where simulated flows are greater. The highest unweighted groundwater discharge residuals occur at Death Valley, Sarcobatus Flat (northeastern area), Tecopa, and early observations at Manse Spring in Pahrump Valley. High weighted-discharge residuals were computed in Indian Springs Valley and parts of Death Valley. Most of these inaccuracies in head and discharge can be attributed to insufficient representation of the hydrogeology in the HFM and(or) discharge estimates, misrepresentation of water levels, and(or) model error associated with grid-cell size. The model represents the large and complex groundwater flow system of the Death Valley region at a greater degree of refinement and accuracy than has been possible previously. The representation of detail provided by the 3D digital hydrogeologic framework model and the numerical groundwater flow model enabled greater spatial accuracy in every model parameter. The lithostratigraphy and structural effects of the hydrogeologic framework; recharge estimates from simulated net infiltration; discharge estimates from ET, spring flow, and pumping; and boundary inflow and outflow estimates all were reevaluated, some additional data were collected, and accuracy was improved. Uncertainty in the results of the flow model simulations can be reduced by improving on the quality, interpretation, and representation of the water-level and discharge observations used to calibrate the model and improving on the representation of the HGU geometries, the spatial variability of HGU material properties, the flow model physical framework, and the hydrologic conditions.

California, Nevada↗
USGS2007

Regional Fluid Flow and Basin Modeling in Northern Alaska

The foothills of the Brooks Range contain an enormous accumulation of zinc (Zn) in the form of zinc sulfide and barium (Ba) in the form of barite in Carboniferous shale, chert, and mudstone. Most of the resources and reserves of Zn occur in the Red Dog deposit and others in the Red Dog district; these resources and reserves surpass those of most deposits worldwide in terms of size and grade. In addition to zinc and lead sulfides (which contain silver, Ag) and barite, correlative strata host phosphate deposits. Furthermore, prolific hydrocarbon source rocks of Carboniferous and Triassic to Early Jurassic age generated considerable amounts of petroleum that may have contributed to the world-class petroleum resources of the North Slope. Deposits of Zn-Pb-Ag or barite as large as those in the Brooks Range are very rare on a global basis and, accordingly, multiple coincident favorable factors must be invoked to explain their origins. To improve our understanding of these factors and to contribute to more effective assessments of resources in sedimentary basins of northern Alaska and throughout the world, the Mineral Resources Program and the Energy Resources Program of the U.S. Geological Survey (USGS) initiated a project that was aimed at understanding the petroleum maturation and mineralization history of parts of the Brooks Range that were previously poorly characterized. The project, titled “Regional Fluid Flow and Basin Modeling in Northern Alaska,” was undertaken in collaboration with industry, academia, and other government agencies. This Circular contains papers that describe the results of the recently completed project. The studies that are highlighted in these papers have led to a better understanding of the following: The complex sedimentary facies relationships and depositional settings and the geochemistry of the sedimentary rocks that host the deposits (sections 2 and 3). The factors responsible for formation of the barite and zinc deposits (sections 4 and 5). The geochemical indicators or exploration tools that might be used to locate other large deposits of similar character in the Red Dog district and elsewhere (section 6). The isotopic compositions of barite and sulfide deposits (sections 7 and 8) The distribution and nature of phosphate and metalliferous oil shale localities (sections 9 and 10). The architecture, kinematics, and timing of the complex thrust systems that disrupted and redistributed the Carboniferous and younger rocks; these studies are necessary in order to make a realistic palinspastic reconstruction of the basin (sections 11 and 12). The nature and extent of the petroleum system sourced from Mississippian rocks (section 13).

Circular↗
USGS2006

Potential tight gas resources in a frontier province - Jurassic through Tertiary strata beneath the Brooks Range foothills, Arctic Alaska

Beneath the foothills of the Brooks Range, rocks of the Lower Cretaceous-Tertiary Brookian and Jurassic-Lower Cretaceous Beaufortian megasequences have been deeply buried and exhumed, and now exhibit characteristics of 'tight gas sandstones'. The data recovered from drilling, well tests, and cores exhibit the potential for substantial gas reserves over a large area. These data include recovery of gas from drillstem tests, indications of overpressure from well tests and mud weights, low porosity and permeability in sandstones, and vitrinite reflectance values ranging from 1.0 to 2.0 percent throughout substantial depth intervals.

Open-File Report↗
USGS2004

Two stages of deformation and fluid migration in the west-central Brooks Range fold and thrust belt, Northern Alaska

The Brooks Range is a north-directed fold and thrust belt that forms the southern boundary of the North Slope petroleum province in northern Alaska. Field-based studies have long recognized that large-magnitude, thin-skinned folding and thrusting in the Brooks Range occurred during arc-continent collision in the Middle Jurassic to Early Cretaceous (Neocomian). Folds and thrusts, however, also deform middle and Upper Cretaceous strata of the Colville foreland basin and thus record a younger phase of deformation that apatite fission-track data have shown to occur primarily during the early Tertiary (~60 and ~45 Ma). A structural and kinematic model that reconciles these observations is critical to understanding the petroleum system of the Brooks Range fold and thrust belt. New interpretations of outcrop and regional seismic reflection data indicate that from the modern mountain front northward to near the deformation front under the coastal plain, the basal thrust detachment for the orogen is located in the Jurassic and Lower Cretaceous Kingak Shale in the upper part of the regionally extensive, gently south-dipping, north-derived Mississippian to Early Cretaceous Ellesmerian sequence. The frontal part of the orogen lies in middle Cretaceous foreland basin strata and consists of a thin-skinned fold belt at the deformation front and a fully developed passive-roof duplex to the south. Near the mountain front, the orogen is composed of a stacked series of allochthons and thrust duplexes and associated Neocomian syntectonic deposits that are unconformably overlain by proximal foreland basin strata. The foreland basin strata and underlying deformed rocks are truncated by a younger generation of folds and thrusts. Vitrinite reflectance and stable isotope compositions of veins provide evidence of two fluid events in these rocks, including an earlier higher temperature (~250-300°C) event that was buffered by limestone and a younger, lower temperature (~150°C) event that had distinctly lower δ 13 C values as a result of oxidation of organic matter and/or methane. Zircon fission-track data from the host rocks of the veins show that the higher temperature fluid event occurred at 160-120 Ma, whereas the lower temperature event probably occurred at about 60-45 Ma. It is proposed that the Brooks Range consists of two superposed contractional orogens that used many of the same mechanically incompetent stratigraphic units (e.g., Kayak Shale, Kingak Shale) as sites of thrust detachment. The older orogen formed in a north-directed arc-continent collisional zone that was active from 160 to 120 Ma. This deformation produced a thin-skinned deformational wedge that is characterized by far-traveled allochthons with relatively low structural relief, because it involved a thin (1-4-km [0.6-2.5-mi]-thick) stratigraphic section. Deeper parts of the deformational wedge are envisioned to have contained relatively high-temperature fluids that presumably migrated from or through limestone-rich source areas in the underlying autochthon or from deeper parts of the orogen. The younger orogen, which formed initially at about 60 Ma and reactivated at 45 Ma, produced a thrust belt and frontal triangle zone with low amounts of shortening and relatively high structural relief, because it involved a structural section 5-10 km (3-6 mi) thick. Fluids associated with this deformation were relatively of lower temperature and suggest that hydrocarbon migration occurred at this time. We conclude that hydrocarbon generation from Triassic and Jurassic source strata and migration into stratigraphic traps occurred primarily by sedimentary burial principally at 100-90 Ma, between the times of the two major episodes of deformation. Subsequent sedimentary burial caused deep stratigraphic traps to become overmature, cracking oil to gas, and initiated some new hydrocarbon generation progressively higher in the section. Structural disruption of the traps in the early Tertiary released sequestered hydrocarbons. The hydrocarbons remigrated into newly formed structural traps, which formed at higher structural levels or were lost to the surface. Because of the generally high maturation of the Colville basin at the time of the deformation and remigration, most of the hydrocarbons available to fill traps were gas.

Alaska↗
USGS2004

Tertiary thrust systems and fluid flow beneath the Beaufort coastal plain (1002 area), Arctic National Wildlife Refuge, Alaska, U.S.A.

Beneath the Arctic coastal plain (commonly referred to as "the 1002 area") in the Arctic National Wildlife Refuge, northeastern Alaska, United States, seismic reflection data show that the northernmost and youngest part of the Brookian orogen is preserved as a Paleogene to Neogene system of blind and buried thrust-related structures. These structures involve Proterozoic to Miocene (and younger?) rocks that contain several potential petroleum reservoir facies. Thermal maturity data indicate that the deformed rocks are mature to overmature with respect to hydrocarbon generation. Oil seeps and stains in outcrops and shows in nearby wells indicate that oil has migrated through the region; geochemical studies have identified three potential petroleum systems. Hydrocarbons that were generated from Mesozoic source rocks in the deformed belt were apparently expelled and migrated northward in the Paleogene, before much of the deformation in this part of the orogen. It is also possible that Neogene petroleum, which was generated in Tertiary rocks offshore in the Arctic Ocean, migrated southward into Neogene structural traps at the thrust front. However, the hydrocarbon resource potential of this largely unexplored region of Alaska's North Slope remains poorly known. In the western part of the 1002 area, the dominant style of thin-skinned thrusting is that of a passive-roof duplex, bounded below by a detachment (floor thrust) near the base of Lower Cretaceous and younger foreland basin deposits and bounded above by a north-dipping roof thrust near the base of the Eocene. East-west-trending, basement-involved thrusts produced the Sadlerochit Mountains to the south, and buried, basement-involved thrusts are also present north of the Sadlerochit Mountains, where they appear to feed displacement into the thin-skinned system. Locally, late basement-involved thrusts postdate the thin-skinned thrusting. Both the basement-involved thrusts and the thin-skinned passive-roof duplex were principally active in the Miocene. In the eastern part of the 1002 area, a northward-younging pattern of thin-skinned deformation is apparent. Converging patterns of Paleocene reflectors on the north flank of the Sabbath syncline indicate that the Aichilik high and the Sabbath syncline formed as a passive-roof duplex and piggyback basin, respectively, just behind the Paleocene deformation front. During the Eocene and possibly the Oligocene, thin-skinned thrusting advanced northward over the present location of the Niguanak high. A passive-roof duplex occupied the frontal part of this system. The Kingak and Hue shales exposed above the Niguanak high were transported into their present structural position during the Eocene to Oligocene motion on the long thrust ramps above the present south flank of the Niguanak high. Broad, basement-cored subsurface domes (Niguanak high and Aurora dome) formed near the deformation front in the Oligocene, deforming the overlying thin-skinned structures and feeding a new increment of displacement into thin-skinned structures directly to the north. Deformation continued through the Miocene above a detachment in the basement. Offshore seismicity and Holocene shortening documented by previous workers may indicate that contractional deformation continues to the present day.

Alaska↗
USGS2003

Structural plays in Ellesmerian sequence and correlative strata of the National Petroleum Reserve, Alaska

Reservoirs in deformed rocks of the Ellesmerian sequence in southern NPRA are assigned to two hydrocarbon plays, the Thrust-Belt play and the Ellesmerian Structural play. The two plays differ in that the Thrust-Belt play consists of reservoirs located in allochthonous strata in the frontal part of the Brooks Range fold-and-thrust belt, whereas those of the Ellesmerian Structural play are located in autochthonous or parautochthonous strata at deeper structural levels north of the Thrust-Belt play. Together, these structural plays are expected to contain about 3.5 TCF of gas but less than 6 million barrels of oil. These two plays are analyzed using a two-stage deformational model. The first stage of deformation occurred during the Neocomian, when distal strata of the Ellesmerian sequence were imbricated and assembled into deformational wedges emplaced northward onto regionally south-dipping authochon at 140-120 Ma. In the mid-Cretaceous following cessation of the deformation, the Colville basin, the foreland basin to the orogen, was filled with a thick clastic succession. During the second stage of deformation at about 60 Ma (early Tertiary), the combined older orogenic belt-foreland basin system was involved in another episode of north-vergent contractional deformation that deformed pre-existing stratigraphic and structurally trapped reservoir units, formed new structural traps, and caused significant amounts of uplift, although the amount of shortening was relatively small in comparison to the first episode of deformation. Hydrocarbon generation from source strata (Shublik Formation, Kingak Shale, and Otuk Formation) and migration into stratigraphic traps occurred primarily by sedimentary burial principally between 100-90 Ma, between the times of the two episodes of deformation. Subsequent burial caused deep stratigraphic traps to become overmature, cracking oil to gas, and some new generation to begin progressively higher in the section. Structural disruption of the traps in the Early Tertiary is hypothesized to have released sequestered hydrocarbons and caused remigration into newly formed structural traps formed at higher structural levels. Because of the generally high maturation of the Colville basin at the time of the deformation and remigration, most of the hydrocarbons available to fill traps were gas. In the the Thrust-Belt play, the primary reservoir lithology is expected to be dolomitic carbonate rocks of the Lisburne Group, which contain up to 15% porosity. Antiformal stacks of imbricated Lisburne Group strata form the primary trapping configuration, with chert and shale of the overlying Etivluk Group forming seals on closures. Traps are expected to have been charged primarily with remigrated gas, but oil generated from local sources in the Otuk Formation may have filled some traps at high structural levels. The timing for migration of gas into traps is excellent, but only moderate for oil because peak oil generation for the play as a whole occurred 30 to 40 m.y. before trap formation. Reservoir and seal quality in the play are questionable, reducing the likelyhood of hydrocarbon accumulations being present in the play. Our analysis suggests that the play will hold 5.7 million barrels of technically recoverable oil and 1.5 TCF gas (mean values). In the Ellesmerian Stuctural play, the primary reservoir lithologies will be dolomitic carbonate rocks of the Lisburne Group and, less likely, clastic units in the Ellesmerian sequence. Traps in the play are anticlinal closures caused by small amounts of strain in the footwall below the basal detachment for most early Tertiary thrusting. Because these traps lie beneath the main source rock units (Shublik, Kingak, lower Brookian sequence), reservoirs that are juxtaposed by faulting against source-rock units are expected to have the most favorable migration pathways. The charge will be primarily remigrated gas; no oil is expected because of the great depths (15,000 to 26,000 ft) and consequent high thermal maturity of this play. Although the the probability of charge and timeliness of trap formation and gas remigration are excellent, seal and reservoir qualities are anticipated to be poor. Our analysis suggests that about 2.0 TCF of techncially recoverable gas can be expected in the play.

Alaska↗
USGS2003

Brookian structural plays in the National Petroleum Reserve, Alaska

As part of the U.S. Geological Survey assessment of undiscovered oil and gas resources in the National Petroleum Reserve-Alaska (NPRA), two structural plays were assessed in thrust-faulted and folded Upper Cretaceous rocks of the Brookian megasequence. These are the Brookian Topset Structural Play and the Torok Structural Play, located in the Brooks Range foothills and the southern part of the coastal plain, within the Tertiary-age frontal part of the Jurassic to Tertiary Brooks Range orogenic belt. A new regional structural interpretation, developed through regional seismic analyses, reconnaissance field investigations, and new thermal constraints, guided the geologic evaluation and risking of these plays. Volumetric parameters were derived from seismic reflection data, well data and oil and gas field analogs. The fundamental elements of the Brookian Topset Structural Play, exemplified by the undeveloped Umiat oil field, include: (1) reservoirs in Nanushuk Group and uppermost Torok Formation shallow-marine to nonmarine sandstones draped over anticlines caused by structural thickening in underlying Torok mudstones; (2) seals provided by overlying shale drapes in the Nanushuk, and locally by thrust faults; (3) Torok, gamma-ray-zone (GRZ) or pebble shale source rocks; (4) remigration of hydrocarbons from early formed (Late Cretaceous) stratigraphic traps disrupted by 60 Ma thrusting, into newly formed structural traps. The 60 Ma thrusting was probably accompanied by new generation and migration of natural gas resulting from late structural thickening and tectonic loading. Subsurface data from the Umiat field and other seismic reflection data within the play area indicate that the structural traps are commonly compartmentalized by thrust faults. The fundamental elements of the Torok Structural Play, exemplified by the undeveloped East Kurupa gas accumulation just south of NPRA, include: (1) reservoirs in lower Torok Formation basin-floor sandstones, and perhaps in small sandstone bodies intercalated with middle to upper Torok mudstones; (2) structural traps provided by folded sandstone bodies above thrust faults within a pervasively deformed passive-roof duplex beneath the foothills and a less-strongly deformed domain to the north; (3) seals provided by Torok mudstone, both stratigraphically above the sandstone bodies and smeared along bounding thrust faults; (4) Torok, GRZ, pebble shale, or Kingak Shale source rocks; (5) a migration and charging scenario similar to that of the Brookian Topset Structural Play. According to our estimates, the Brookian Topset Structural Play contains 137 million barrels of technically recoverable oil and 10.6 trillion cubic feet (TCF) of technically recoverable, non-associated natural gas, with both values representing the mean estimate (expected value). The Torok Structural Play contains about 35 million barrels of technically recoverable oil and 17.9 TCF of technically recoverable, nonassociated natural gas.

Open-File Report↗
USGS2003

Association of deformation and fluid events in the central Brooks Range fold-and-thrust belt, Northern Alaska

Ocentral Brooks Range consists of two superposed north-directed contractional orogens, one formed between 140-120 Ma and the other at ~60-45 Ma. The older orogen was an arc-continent collisional zone characterized by far-traveled allochthons and relatively low structural relief. The younger orogen is a retroarc thrust belt with relatively low amounts of shortening and high structural relief. Folding and thrusting of the younger episode is superimposed on the thin-skinned deformational wedge of the earlier orogen and also produced a frontal triangle zone in a thick sequence of mid-Cretaceous foreland basin sediments to the north. Stable isotope compositions of calcite and quartz veins indicate two fluid events including: (1) an earlier, higher-temperature (~250-300° C) event that produced veins in deformed Devonian clastic rocks, and (2) a younger, lower-temperature (~150° C) event that deposited veins in deformed Mississippian through Albian strata. The fluids in the first event had variable d18O values, but nearly constant d13C values buffered by limestone lithologies. The vein-forming fluids in the second event had similarly variable d18O values, but with distinctly lower d13C values as a result of oxidation of organic matter and/or methane. Zircon fission track ages demonstrate cooling to temperatures below 200° C between 140-120 Ma for the Devonian rocks, whereas zircon and apatite fission track ages show that Mississippian to Albian rocks were never heated above 200° C and cooled below 110-90° C at ~60-45 Ma. These data are interpreted as indicating that the older, high-temperature fluid event was active during thrusting at 120-140 Ma, and the younger fluid event during deformation at ~60-45 Ma. The data and results presented in this poster will be published in early 2004 in Moore and others (in press).

Alaska↗
USGS2002

Interpreting the earthquake source of the Wabash Valley seismic zone (Illinois, Indiana, and Kentucky) from seismic-reflection, gravity, and magnetic-intensity data

Reprocessing of seismic-reflection data reveals new images of upper- to middle-crustal structures beneath the Wabash Valley seismic zone, located north of the New Madrid seismic zone within the seismically active southern Illinois basin. Four intersecting deep seismic profiles (243 km total) indicate an anomalous, 5–10-km-wide zone of dipping reflections and diffractions below the western flank of the Wabash Valley fault system (WVFS). The zone corresponds in places to gently arched regions of Paleozoic strata. The reflector zone can be interpreted as a result of either (or a combination of) magmatic intrusion or structural deformation. The area encompassing the reflection profiles has experienced several moderate magnitude (3.0 ≤ m bLg ≤ 5.5) earthquakes during the past 50 years, defining the central part of the Wabash Valley seismic zone. The hypocenter of the largest 20th-century earthquake in the central USA midcontinent (9 November 1968, m bLg 5.5) corresponds to the most prominent zone of dipping middle-crustal reflections, just west of the WVFS. Both the focal mechanism (moderately dipping reverse fault) and the expected rupture zone size (∼2.9 km fault length) of this earthquake are consistent with the orientation and size of observed reflectors. Dipping reflector patterns in the Precambrian crust are not collinear with fault surfaces updip in the Paleozoic sedimentary section. This indicates that shallow Paleozoic structures are effectively “decoupled” from deeper, possibly seismogenic structure, which suggests that understanding Paleozoic structure is not the key to understanding the earthquake source. The complex dipping crustal reflectivity beneath the WVFS is typical of Paleozoic continental convergent zones observed elsewhere ( e.g. , Appalachian orogen) and thus may suggest a preserved Proterozoic suture, possibly associated with the distal Grenville orogeny or an older event. Although magnetic intensity, Bouguer gravity, and seismic-reflection data present different means of understanding the deep geology of the area, their integration aids in limiting the number of admissible interpretations. The reflection profiles indicate a variable zone of anomalous crustal structure, including the dipping reflector zone, along a trend of northeast-trending gravity and magnetic highs locally defining the Commerce geophysical lineament (CGL), which is a suspected source of seismic hazard in the central USA midcontinent. Three-dimensional inverse modeling of the residual isostatic gravity anomaly values indicates that the upper part of the dipping reflector zone beneath the CGL lies near an important density boundary in the upper Precambrian crust. The results of our study suggest that the seismogenic source just north of the New Madrid seismic zone consists, in part, of a pre-existing fabric of blind thrusts localized along pre-existing igneous intrusions, locally coincident with the CGL. This suggests that the CGL may be seismogenic in places and thus a potential seismic hazard. The variation in the expression of the CGL using reflection and potential-field data sets is probably partly related to the differing geologic features by which it is expressed, but would be also consistent with its reactivation numerous times under varying stress regimes.

Illinois, Indiana, Kentucky↗
USGS2002

Geologic map of the Yucca Mountain region, Nye County, Nevada

Yucca Mountain, Nye County, Nev., has been identified as a potential site for underground storage of high-level radioactive waste. This geologic map compilation, including all of Yucca Mountain and Crater Flat, most of the Calico Hills, western Jackass Flats, Little Skull Mountain, the Striped Hills, the Skeleton Hills, and the northeastern Amargosa Desert, portrays the geologic framework for a saturated-zone hydrologic flow model of the Yucca Mountain site. Key geologic features shown on the geologic map and accompanying cross sections include: (1) exposures of Proterozoic through Devonian strata inferred to have been deformed by regional thrust faulting and folding, in the Skeleton Hills, Striped Hills, and Amargosa Desert near Big Dune; (2) folded and thrust-faulted Devonian and Mississippian strata, unconformably overlain by Miocene tuffs and lavas and cut by complex Neogene fault patterns, in the Calico Hills; (3) the Claim Canyon caldera, a segment of which is exposed north of Yucca Mountain and Crater Flat; (4) thick densely welded to nonwelded ash-flow sheets of the Miocene southwest Nevada volcanic field exposed in normal-fault-bounded blocks at Yucca Mountain; (5) upper Tertiary and Quaternary basaltic cinder cones and lava flows in Crater Flat and at southernmost Yucca Mountain; and (6) broad basins covered by Quaternary and upper Tertiary surficial deposits in Jackass Flats, Crater Flat, and the northeastern Amargosa Desert, beneath which Neogene normal and strike-slip faults are inferred to be present on the basis of geophysical data and geologic map patterns. A regional thrust belt of late Paleozoic or Mesozoic age affected all pre-Tertiary rocks in the region; main thrust faults, not exposed in the map area, are interpreted to underlie the map area in an arcuate pattern, striking north, northeast, and east. The predominant vergence of thrust faults exposed elsewhere in the region, including the Belted Range and Specter Range thrusts, was to the east, southeast, and south. The vertical to overturned strata of the Striped Hills are hypothesized to result from successive stacking of three south-vergent thrust ramps, the lowest of which is the Specter Range thrust. The CP thrust is interpreted as a north-vergent backthrust that may have been roughly contemporaneous with the Belted Range and Specter Range thrusts. The southwest Nevada volcanic field consists predominantly of a series of silicic tuffs and lava flows ranging in age from 15 to 8 Ma. The map area is in the southwestern quadrant of the southwest Nevada volcanic field, just south of the Timber Mountain caldera complex. The Claim Canyon caldera, exposed in the northern part of the map area, contains thick deposits of the 12.7-Ma Tiva Canyon Tuff, along with widespread megabreccia deposits of similar age, and subordinate thick exposures of other 12.8- to 12.7-Ma Paintbrush Group rocks. An irregular, blocky fault array, which affects parts of the caldera and much of the nearby area, includes several large-displacement, steeply dipping faults that strike radially to the caldera and bound south-dipping blocks of volcanic rock. South and southeast of the Claim Canyon caldera, in the area that includes Yucca Mountain, the Neogene fault pattern is dominated by closely spaced, north-northwest- to north-northeast-striking normal faults that lie within a north-trending graben. This 20- to 25-km-wide graben includes Crater Flat, Yucca Mountain, and Fortymile Wash, and is bounded on the east by the 'gravity fault' and on the west by the Bare Mountain fault. Both of these faults separate Proterozoic and Paleozoic sedimentary rocks in their footwalls from Miocene volcanic rocks in their hanging walls. Stratigraphic and structural relations at Yucca Mountain demonstrate that block-bounding faults were active before and during eruption of the 12.8- to 12.7-Ma Paintbrush Group, and significant motion on these faults continued unt

IMAP↗