USGS Science⌕ Search

Geology topics

Cheryl Cameron

Publications and source records attributed to Cheryl Cameron.

11 recordsLinked to original sources
USGS2024

From field station to forecast: Managing data at the Alaska Volcano Observatory

The Alaska Volcano Observatory (AVO) uses multidisciplinary data to monitor and study dozens of active and potentially active volcanoes. Here, we provide an overview of internally and externally generated data types, tools and resources used in their management, and challenges faced. Data sources include the following: (1) a multiparameter (seismic, infrasound, GNSS, web cameras) ground-based monitoring network that spans 3000 km and transmits data in real time; (2) a variety of satellite-borne sensors that provide information about surface change and volcanic emissions; (3) geologic and gas field campaigns; and (4) other external data products that provide situation awareness. Each data type requires distinct acquisition, processing, storage, visualization, and archiving approaches. AVO uses a variety of externally and internally developed tools to handle individual data types as well as multidisciplinary volcanological data. A primary tool is the Geologic Database of Information on Volcanoes in Alaska (GeoDIVA), which stores detailed, searchable information on more than 140 volcanoes and over 1000 eruptions and unrest events, including images, eruption descriptions, and geologic station and sample data, metadata, and analyses. It interacts with other internal tools that store monitoring reports and other operational records. Additional data management resources used by AVO assist with alarms and alerts, state-of-health monitoring, and multiparameter visualization. Requirements for 24/7 accessibility, the ever-expanding portfolio of data, and transitioning new tools from development to operations are all challenges faced by AVO and other volcano observatories. AVO strives to meet FAIR data practices and ensure that data are available to national and international community efforts using external repositories as well as those hosted by AVO and its parent institutions.

Alaska↗
USGS2024

2020 Volcanic activity in Alaska—Summary of events and response of the Alaska Volcano Observatory

The Alaska Volcano Observatory responded to eruptions, volcanic unrest or suspected unrest, increased seismicity, and other significant activity at nine volcanic centers in Alaska in 2020. The most notable volcanic activity in 2020 was an eruption of Shishaldin Volcano, which produced lava flows, lahars, and ash. Mount Cleveland had one small ash-producing eruption in June but was quiet thereafter. Other activity documented in 2020 consisted of elevated seismicity at the volcanoes Mount Veniaminof, Pavlof Volcano, Makushin Volcano, Atka volcanic complex (Korovin Volcano), Great Sitkin Volcano, and Semisopochnoi Island. Finally, the resuspension of ash deposited during the 1912 Novarupta-Katmai eruption was documented on three occasions.

Alaska↗
USGS2023

Estimates of volcanic mercury emissions from Redoubt Volcano, Augustine Volcano, and Mount Spurr eruption ash

Ash is a potential sink of volcanically sourced atmospheric mercury (Hg), and the concentration of particle-bound Hg may provide constraints on Hg emissions during eruptions. We analyze Hg concentrations in 227 bulk ash samples from the Mount Spurr (1992), Redoubt Volcano (2009), and Augustine Volcano (2006) volcanic eruptions to investigate large-scale spatial, temporal, and volcanic-source trends. We find no significant difference in Hg concentrations in bulk ash by distance or discrete eruptive events at each volcano, suggesting that in-plume reactions converting gaseous Hg 0 to adsorbed Hg 2+ are happening on shorter timescales than considered in this study (minutes) and any additional in-plume controls are not discernable within intra-volcanic sample variability. However, we do find a significant difference in Hg concentration of ash among volcanic sources, which indicates that volcanoes may emit comparatively high or low quantities of Hg. We combine our Hg findings with total mass estimates of ashfall deposits to calculate minimum, first-order Hg emissions of 8.23 t Hg for Mount Spurr (1992), 1.25 t Hg for Redoubt Volcano (2009), and 0.16 t Hg for Augustine Volcano (2006). In particular, we find that Mount Spurr is a high Hg emitting volcano, and that its 1992 particulate Hg emissions likely contributed substantially to the global eruptive volcanic Hg budget for that year. Based on our findings, previous approaches that use long-term Hg/SO 2 mass ratios to estimate eruptive total Hg under-account for Hg emitted in explosive events, and global volcanogenic Total Hg estimates need revisiting.

Alaska↗
USGS2019

Overview, chronology, and impacts of the 2016–2017 eruption of Bogoslof volcano, Alaska

The 2016–2017 eruption of Bogoslof volcano, a back-arc shallow submarine volcano in Alaska’s Aleutian arc, began in December 2016 and included 70 explosive events and at least two episodes of subaerial dome building. Because the volcano had no local monitoring stations during the eruption, a combination of distant seismic stations, regional infrasound sensors, lightning detection, a variety of satellite data and observer reports, and a field visit in 2018, were used to recreate the events that occurred during the nine-month eruption. Following precursory seismicity that started in September 2016, the eruption began in December 2016 with a series of explosive events that persisted through mid-March 2017. After a 6-week hiatus, activity resumed on May 17 and lasted through the end of August 2017 and consisted of additional explosions and two short-lived subaerial lava domes that formed in June and August. For most of the eruption, Bogoslof’s vent was submerged in shallow seawater, though during several of the longer events a subaerial edifice grew, and the vent migrated above sea level resulting in more ash-rich volcanic clouds. Eruptive products, geophysical signals, and eruptive style are all broadly consistent with vulcanian activity where slow magma ascent led to repetitive dome or plug formation, overpressurization in the upper conduit, and sudden release during short-lived explosions. Infiltration of seawater may have prohibited large domes from forming especially in the first half of the eruption when explosions were closely spaced in time. The largest four explosions in the sequence occurred after inter-event times of 10 days or more. Three events produced ashfall on nearby communities and mariners east and south of Bogoslof and the eruption resulted in dozens of flight cancelations and flight diversions around the volcano and its ash clouds.

Alaska↗
USGS2019

Volcanic hazards in Alaska’s National Parks

There are over 100 volcanoes in Alaska, 54 of which are considered historically active. A historically active volcano is one that fits one of the following criteria: a documented or strongly suspected eruption since the year 1700, persistent fumaroles near boiling point, significant deformation with a volcanic cause, or an earthquake swarm with a volcanic cause (Cameron and Schaefer, 2016). Alaska’s National Parks, Preserves, and Monuments contain a total of 14 historically active volcanoes (Fig. 1). There are numerous other volcanoes within Alaska’s National Parks, Preserves, and Monuments that are not considered historically active but which could erupt at some point in the future. In the past 100 years, there have been seven confirmed eruptions from historically active volcanoes within Alaska’s National Parks, Preserves, and Monuments. The Alaska Volcano Observatory (AVO) monitors and conducts research on volcanoes in Alaska in order to better understand volcanic processes and determine the likelihood of future volcanic hazards, with a primary goal of informing the public and local, state, and federal entities about volcanic hazards and impending volcanic activity. Volcanic hazards in Alaska’s National Parks, Preserves, and Monuments include both proximal hazards (within 30 km or 19 mi of the vent) and distal hazards that are capable of impacting areas at the regional, national, or international scale.

Alaska↗
USGS2018

Alaska Volcano Observatory alert and forecasting timeliness: 1989–2017

The Alaska Volcano Observatory (AVO) monitors volcanoes in Alaska and issues notifications and warnings of volcanic unrest and eruption. We evaluate the timeliness and accuracy of eruption forecasts for 53 eruptions at 20 volcanoes, beginning with Mount Redoubt's 1989–1990 eruption. Successful forecasts are defined as those where AVO issued a formal warning before eruption onset. These warning notifications are now part of AVO's Aviation Color Code and Volcanic Alert Level. This analysis considers only the start of an eruption, although many eruptions have multiple phases of activity. For the 21 eruptions at volcanoes with functioning local seismic networks, AVO has high forecasting success at volcanoes with: >15 years repose intervals and magmatic eruptions (4 out of 4, 100%); or larger eruptions (Volcanic Explosivity Index (VEI) 3 or greater; 6 out of 10, 60%). Therefore, AVO successfully forecast all four monitored, longer-repose period, VEI 3+ eruptions: Redoubt 1989–1990 and 2009, Spurr 1992, and Augustine 2005–2006. For volcanoes with functioning seismic monitoring networks, success rates are lower for: volcanoes with shorter repose periods (3 out of 16, 19%); more mafic compositions (3 out of 18, 17%); or smaller eruption size (VEI 2 or less, 1 out of 11, 9%). These eruptions (Okmok, Pavlof, Veniaminof, and Shishaldin) often lack detectable precursory signals. For 32 eruptions at volcanoes without functioning local seismic networks, the forecasting success rate is much lower (2, 6%; Kasatochi 2008 and Shishaldin 2014). For remote volcanoes where the main hazard is to aviation, rapid detection is a goal in the absence of in situ monitoring. Eruption detection has improved in recent years, shown by a decrease in the time between eruption onset and notification. Even limited seismic monitoring can detect precursory activity at volcanoes with certain characteristics (intermediate composition, longer repose times, larger eruptions), but difficulty persists in detecting subtle precursory activity at frequently active volcanoes with more mafic compositions. This suggests that volcano-specific characteristics should be considered when designing monitoring programs and evaluating forecasting success. More proximally-located sensors and data types are likely needed to forecast eruptive activity at frequently-active, more mafic volcanoes that generally produce smaller eruptions.

Alaska↗
USGS2015

2013 volcanic activity in Alaska: summary of events and response of the Alaska Volcano Observatory

The Alaska Volcano Observatory (AVO) responded to eruptions, volcanic unrest or suspected unrest, and seismic events at 18 volcanic centers in Alaska during 2013. Beginning with the 2013 AVO Summary of Events, the annual description of the AVO seismograph network and activity, once a stand-alone publication, is now part of this report. Because of this change, the annual summary now contains an expanded description of seismic activity at Alaskan volcanoes. Eruptions occurred at three volcanic centers in 2013: Pavlof Volcano in May and June, Mount Veniaminof Volcano in June through December, and Cleveland Volcano throughout the year. None of these three eruptive events resulted in 24-hour staffing at AVO facilities in Anchorage or Fairbanks.

Alaska↗
USGS2015

'Is Ash Falling?', an online ashfall reporting tool in support of improved ashfall warnings and investigations of ashfall processes

The primary volcano hazard in Alaska is airborne ash, which endangers aircraft flying the busy North Pacific air routes and consequently affects global commerce. Downwind ashfall is also a significant threat to commerce, transportation and day-to-day activities in nearby Alaska communities. A web-enabled database, "Is Ash Falling?" has been developed to collect ashfall observations and encourage sample collections from the public during eruptions, enabling volcano observatory staff to concentrate on eruption response. Knowing the locations of filed ashfall reports improves public ashfall warnings and forecasts by providing on-the-ground checks for ash dispersion and fallout computer models and satellite imagery interpretation. Reports of ashfall are shared with emergency management agencies and the wider public. These reports also give scientists a more complete record of the amount, duration and other conditions of ashfall.

Journal of Applied Volcanology↗
USGS2012

The 2009 eruption of Redoubt Volcano, Alaska

Redoubt Volcano, an ice-covered stratovolcano on the west side of Cook Inlet, erupted in March 2009 after several months of escalating unrest. The 2009 eruption of Redoubt Volcano shares many similarities with eruptions documented most recently at Redoubt in 1966–68 and 1989–90. In each case, the eruptive phase lasted several months, consisted of multiple ashproducing explosions, produced andesitic lava and tephra, removed significant amounts of ice from the summit crater and Drift glacier, generated lahars that inundated the Drift River valley, and culminated with the extrusion of a lava dome in the summit crater. Prior to the 2009 explosive phase of the eruption, precursory seismicity lasted approximately six months with the fi rst weak tremor recorded on September 23, 2008. The first phreatic explosion was recorded on March 15, and the first magmatic explosion occurred seven days later, at 22:34 on March 22. The onset of magmatic explosions was preceded by a strong, shallow swarm of repetitive earthquakes that began about 04:00 on March 20, 2009, less than three days before an explosion. Nineteen major ash-producing explosions generated ash clouds that reached heights between 17,000 ft and 62,000 ft (5.2 and 18.9 km) ASL. During ash fall in Anchorage, the Ted Stevens International Airport was shut down for 20 hours, from ~17:00 on March 28 until 13:00 on March 29. On March 23 and April 4, lahars with fl ow depths to 10 m in the upper Drift River valley inundated parts of the Drift River Terminal (DRT). The explosive phase ended on April 4 with a dome collapse at 05:58. The April 4 ash cloud reached 50,000 ft (15.2 km) and moved swiftly to the southeast, depositing up to 2 mm of ash fall in Homer, Anchor Point, and Seldovia. At least two and possibly three lava domes grew and were destroyed by explosions prior to the final lava dome extrusion that began after the April 4 event. The fi nal lava dome ceased growth by July 1, 2009, with an estimated volume of 72 Mm 3

Alaska↗
USGS2010

Petrology and geochemistry of the 2006 eruption of Augustine Volcano

Deposits from the 2006 eruption of Augustine Volcano, Alaska, record a complex history of magma mixing before and during the eruption. The eruption produced five major lithologies: low-silica andesite scoria (LSAS; 56.5 to 58.7 weight percent SiO 2 ), mostly during the initial explosive phase; high-silica andesite pumice (HSA; 62.2 to 63.3 weight percent SiO 2 ), prevalent during the continuous phase; dense low-silica andesite (DLSA; 56.4 to 59.3 weight percent SiO 2 ), predominantly during the late effusive phase; and dense intermediate andesite (DIA) and banded clasts, present throughout the eruption but most abundant in the continuous phase. The DIA and banded clasts have compositions that fall between and partially overlap the ranges noted above. All rock types are phenocryst-rich (36 to 44 volume percent), containing plagioclase, orthopyroxene, augite, Fe-Ti oxides, olivine, and rare amphibole, apatite, and anhydrite. Glasses from tephra and flow-deposit clasts range from 66 to nearly 80 weight percent SiO 2 and represent highly evolved melt relative to the bulk rock compositions. Fe-Ti oxides recorded f O2 ~2 log units above the Ni-NiO buffer and temperatures of 904±47°C and 838±14°C from LSAS and HSA samples, respectively, with the intermediate lithologies falling in the middle of these ranges. The dense low-silica andesite and scoria (collectively LSA) are compositionally nearly identical, and trace-element patterns show that the HSA is not the result of shallow crustal fractionation of the LSA. The petrological and geochemical data indicate that two-component magma mixing between the LSA and HSA caused the compositional spread in eruptive products. The phenocryst population in the LSA suggests that it represents a hybrid formed from the HSA and an unerupted, basaltic “replenishing” magma. On the basis of petrological and geophysical observations reported here and elsewhere in this volume, the HSA was stored as a crystal-rich mush with its top at ~5-km depth. An influx of basalt remobilized and partially mixed with a portion of the mush, forming the hybrid LSA. The lower viscosity LSA ascended towards the surface as a dike, erupting during the explosive phase in mid-January 2006. In late January, a large explosion produced the first significant volumes of HSA, followed by several days of rapid HSA effusion during the eruption’s continuous phase. After a three-week hiatus marked by elevated gas output, signifying an open system, degassed LSA erupted during the final, effusive phase. Consistency in eruptive styles and compositions suggests that the HSA magma body may have been similarly rejuvenated during the past several eruptions.

Alaska↗