Geology topics
Charles Sherwood Robinson
Publications and source records attributed to Charles Sherwood Robinson.
General geology of the Harold D. Roberts Tunnel, Colorado
Explore the source record for details and available documents.
Geological, geophysical, and engineering investigations of the Loveland Basin landslide, Clear Creek County, Colorado, 1963-65
Explore the source record for details and available documents.
The validity of geologic projection, a successful example: the Straight Creek Tunnel pilot bore, Colorado
Projection of details of surface geology to depth prior to construction has met with only limited success in many tunneling operations. in the Straight Creek Tunnel pilot bore good results were obtained by making predictions of the extent and kinds but not the exact locations of conditions that could be expected at tunnel level based on a statistical study of surface features. Successful predictions were made regarding percentages of rock types, linear feet of faulted and sheared rocks, and attitudes of foliation and fractures, including faults and joints. Predicted rock loads and final swell pressures in gouge and altered rocks agreed well with actual measurements. Ground water flows were encountered in expected amounts, but criteria for estimations proved to be unsound. Estimates were made of the amount of temporary support, footage of exploratory feeler holes, and amounts of grouting and provided a sound basis for estimating total tunneling coats.
Surficial Geology of the North Scituate quadrangle, Rhode Island
Explore the source record for details and available documents.
Geology of Devils Tower National Monument, Wyoming
Devils Tower is a steep-sided mass of igneous rock that rises above the surrounding hills and the valley of the Belle Fourche River in Crook County, Wyo. It is composed of a crystalline rock, classified as phonolite porphyry, that when fresh is gray but which weathers to green or brown. Vertical joints divide the rock mass into polygonal columns that extend from just above the base to the top of the Tower. The hills in the vicinity and at the base of the Tower are composed of red, yellow, green, or gray sedimentary rocks that consist of sandstone, shale, or gypsum. These rocks, in aggregate about 400 feet thick, include, from oldest to youngest, the upper part of the Spearfish formation, of Triassic age, the Gypsum Spring formation, of Middle Jurassic age, and the Sundance formation, of Late Jurassic age. The Sundance formation consists of the Stockade Beaver shale member, the Hulett sandstone member, the Lak member, and the Redwater shale member. The formations have been only slightly deformed by faulting and folding. Within 2,000 to 3.000 feet of the Tower, the strata for the most part dip at 3 deg - 5 deg towards the Tower. Beyond this distance, they dip at 2 deg - 5 deg from the Tower. The Tower is believed to have been formed by the intrusion of magma into the sedimentary rocks, and the shape of the igneous mass formed by the cooled magma is believed to have been essentially the same as the Tower today. Devils Tower owes its impressiveness to its resistance to erosion as compared with the surrounding sedimentary rocks, and to the contrast of the somber color of the igneous column to the brightly colored bands of sedimentary rocks.
Geology and ore deposits of the Whitepine area, Tomichi mining district, Gunnison County, Colorado
The Tomichi mining district is on the western slope of the Continental Divide near the southern end of the Sawatch Range in southeastern Gunnison County, Colorado. The most productive part of the Tomichi district was the Whitepine area. It is estimated that since the discovery of ore in 1879 the area has produced approximately $7,000,000, principally in lead and zinc, with lesser amounts of silver, copper, and gold. Geologically, the Whitepine area is a faulted syncline of Paleozoic rocks that was intruded by Tertiary igneous rocks. The oldest rock of the area is the Silver Plume granite of pre-Cambrian age. Deposited upon this successively were the Sawatch quartzite (Late Cambrian), Manitou dolomite (Early Ordovician), Harding quartzite (Middle Ordovician), Fremont dolomite (Lade Ordovician), Chaffee formation (Late Devonian), Leadville limestone (Late Mississippian), and Beldon shale (Late Pennsylvanian); a total thickness of about 1,450 feet. During the Laramide Revolution, the sedimentary rocks were folded into a broad northward-plunging syncline, faulted, and intruded by a series of igneous rocks. The igneous rocks, in order of relative age from oldest to youngest, are: a rhyolite stock, the Princeton quartz monzonite batholith, quartz monzonite or quartz latite porphyry dikes, and rhyolite or pitchstone porphyry dikes. The ore deposits of the Whitepine area may be classified into replacement deposits, vein deposits, and contact metamorphic deposits. The replacement deposits may be further subdivided into deposits along faults and bedded deposits. Of the types of deposits, the most productive have been the replacement deposits along faults. The major replacement deposits along faults are those of the Akron, Morning Star, and Victor mines. The ore deposits of these mines are in the foot wall of the Star faults in the Akron mine in the Manitou dolomite and in the Morning Star and Victor mines in the Leadville limestone. The chief bedded replacement deposits are those of the Erie, North Star, and Tenderfoot mines. In the Erie mine the ore deposits are in the Leadville limestone at, or just below, its contact with the Belden shale. In the North Star and Tenderfoot mines the ore bodies are in the Manitou dolomite along the crest of an anticline and the trough of a syncline, respectively. The vein deposits occur in the Silver Plume granite, Princeton quartz monzonite, and Paleozoic sedimentary rocks. The only vein of commercial importance was that of the Spar Copper mine, which is in the Silver Plume granite. Contact metamorphic minerals are found chiefly in the top of the Leadville limestone in the vicinity of the Erie mine, and in the limestone of the Belden shale. Magnetite is the only ore mineral and it was produced only from the Iron King mine. The replacement deposits consist, in general, of sphalerite, galena, pyrite, and chalcopyrite in a gangue of siliclfied limestone or dolomite, quartz, and calcite. The veins, for the most part, consist of pyrite and quartz with only minor amounts of galena, sphalerite, and chalcopyrite. In both types of deposits gold is believed to be associated with the pyrite and sphalerite and silver with the galena. Oxidized ore was the chief product of the early mining. This ore consists of calamine, cerussite, smithsonite, or anglesite, or a combination of these minerals, in a gangue of siliceous limestone or silicified limestone or dolomite. Oxidation did not extend, in most cases, for more than 150 feetbelow the surface. The ore deposits are believed to be genetically related to the Princeton quartz monzonite batholith. Ore-bearing solutions derived from the cooling of magma are believed to have migrated upwards along the pre-existing faults replacing favorable zones in the sedimentary rocks, or depositing quartz and ore minerals in open fissures in the igneous rocks.
Summary report on the stratigraphy and structure of the northern and western flanks of the Black Hills uplift: September, 1956
No abstract available.
Geologic map of the northern and western flanks of the Black Hills, Wyoming and Montana
No abstract available.