USGS Science⌕ Search

Geology topics

C.S. Weaver

Publications and source records attributed to C.S. Weaver.

31 records · Page 2Linked to original sources
USGS1996

Tectonics and seismicity of the southern Washington Cascade range

Geophysical, geological, and seismicity data are combined to develop a transpressional strain model for the southern Washington Cascades region. We use this model to explain oblique fold and fault systems, transverse faults, and a linear seismic zone just west of Mt. Rainier known as the western Rainier zone. We also attempt to explain a concentration of earthquakes that connects the northwest-trending Mount St. Helens seismic zone to the north-trending western Rainier zone. Our tectonic model illustrates the pervasive effects of accretionary processes, combined with subsequent transpressive forces generated by oblique subduction, on Eocene to present crustal processes, such as seismicity and volcanism.

Washington↗
USGS1996

The southern Whidbey Island fault: An active structure in the Puget Lowland, Washington

Information from seismic-reflection profiles, outcrops, boreholes, and potential field surveys is used to interpret the structure and history of the southern Whidbey Island fault in the Puget Lowland of western Washington. This northwest-trending fault comprises a broad (as wide as 6–11 km), steep, northeast-dipping zone that includes several splays with inferred strike-slip, reverse, and thrust displacement. Transpressional deformation along the southern Whidbey Island fault is indicated by along-strike variations in structural style and geometry, positive flower structure, local unconformities, out-of-plane displacements, and juxtaposition of correlative sedimentary units with different histories. The southern Whidbey Island fault represents a segment of a boundary between two major crustal blocks. The Cascade block to the northeast is floored by diverse assemblages of pre-Tertiary rocks; the Coast Range block to the southwest is floored by lower Eocene marine basaltic rocks of the Crescent Formation. The fault probably originated during the early Eocene as a dextral strike-slip fault along the eastern side of a continental-margin rift. Bending of the fault and transpressional deformation began during the late middle Eocene and continues to the present. Oblique convergence and clockwise rotation along the continental margin are the inferred driving forces for ongoing deformation. Evidence for Quaternary movement on the southern Whidbey Island fault includes (1) offset and disrupted upper Quaternary strata imaged on seismic-reflection profiles; (2) borehole data that suggests as much as 420 m of structural relief on the Tertiary-Quaternary boundary in the fault zone; (3) several meters of displacement along exposed faults in upper Quaternary sediments; (4) late Quaternary folds with limb dips of as much as ≈9°; (5) large-scale liquefaction features in upper Quaternary sediments within the fault zone; and (6) minor historical seismicity. The southern Whidbey Island fault should be considered capable of generating large earthquakes (M s ≥7) and represents a potential seismic hazard to residents of the Puget Lowland.

Washington↗
USGS1990

Geothermal segmentation of the Cascade Range in the USA

Characteristics of the crustal thermal regime of the Quaternary Cascades vary systematically along the range. Spatially congruent changes in volcanic vent distribution, volcanic extrusion rate, hydrothermal discharge rate, and regional conductive heat flow define 5 geothermal segments. These segments are, from north to south: (1) the Washington Cascades north of Mount Rainier, (2) the Cascades from Mount Rainier to Mount Hood, (3) the Oregon Cascades from south of Mount Hood to the California border, (4) northernmost California, including Mount Shasta and Medicine Lake volcano, and (5) the Lassen region of northern California. This segmentation indicates that geothermal resource potential is not uniform in the Cascade Range. Potential varies from high in parts of Oregon to low in Washington north of Mount Rainier.

Conference Paper↗
USGS1990

Results of seismological monitoring in the Cascade Range 1962-1989: earthquakes, eruptions, avalanches and other curiosities

Modern monitoring of seismic activity at Cascade Range volcanoes began at Longmire on Mount Rainier in 1958. Since then, there has been an expansion of the regional seismic networks in Washington, northern Oregon and northern California. Now, the Cascade Range from Lassen Peak to Mount Shasta in the south and Newberry Volcano to Mount Baker in the north is being monitored for earthquakes as small as magnitude 2.0, and many of the stratovolcanoes are monitored for non-earthquake seismic activity. This monitoring has yielded three major observations. First, tectonic earthquakes are concentrated in two segments of the Cascade Range between Mount Rainier and Mount Hood and between Mount Shasta and Lassen Peak, whereas little seismicity occurs between Mount Hood and Mount Shasta. Second, the volcanic activity and associated phenomena at Mount St. Helens have produced intense and widely varied seismicity. And third, at the northern stratovolcanoes, signals generated by surficial events such as debris flows, icequakes, steam emissions, rockfalls and icefalls are seismically recorded. Such records have been used to alert authorities of dangerous events in progress. -Authors

Geoscience Canada↗
USGS1988

Geometry of the Juan de Fuca plate beneath Washington and northern Oregon from seismicity

Earthquake hypocenters within the subducting Juan de Fuca plate beneath Washington and northern Oregon are interpreted as showing that the direction of plate dip changes from northeast beneath the Puget Sound region to east-southeast beneath southwestern Washington. The shallowest hypocenters within the Juan de Fuca plate are between 30- to 40-km depth, and the distribution of these events strikes north-northeast from near the mouth of the Columbia River to the northern Olympic Mountains. The distribution of hypocenters between 40 to 50 km generally strikes parallel with the shallowest events, but shows a significant broadening beneath the eastern Olympic Mountains and Puget Sound. Events with depths greater than 50 km south of the 1965 Seattle earthquake (mb = 6.5) strike north-northeast, approximately parallel with the shallower distributions; however, north of this event, the distribution of these deeper hypocenters strikes northwest. This change in the distribution of earthquake hypocenters reflects an upward arching of the Juan de Fuca plate plate beneath Puget Sound compared with the depth of the plate beneath southwestern Washington. The T axis calculated for the 1949 South Puget Sound earthquake (MS = 7.1) is oriented to the southeast, and the 20° plunge of the T axis is in good agreement with the plate dip angle determined from the earthquake hypocenters. We conclude that the 1949 earthquake resulted at least in part from down-dip tensional forces within the subducting Juan de Fuca plate. One consequence of the change in the direction of plate dip is that volcanic front in Washington is everywhere perpendicular to the dip of the Juan de Fuca plate.

Oregon, Washington↗
USGS1985

Forecasts and predictions of eruptive activity at Mount St. Helens, USA: 1975-1984

Public statements about volcanic activity at Mount St. Helens include factual statements, forecasts, and predictions. A factual statement describes current conditions but does not anticipate future events. A forecast is a comparatively imprecise statement of the time, place, and nature of expected activity. A prediction is a comparatively precise statement of the time, place, and ideally, the nature and size of impending activity. A prediction usually covers a shorter time period than a forecast and is generally based dominantly on interpretations and measurements of ongoing processes and secondarily on a projection of past history. The three types of statements grade from one to another, and distinctions are sometimes arbitrary. Forecasts and predictions at Mount St. Helens became increasingly precise from 1975 to 1982. Stratigraphic studies led to a long-range forecast in 1975 of renewed eruptive activity at Mount St. Helens, possibly before the end of the century. On the basis of seismic, geodetic and geologic data, general forecasts for a landslide and eruption were issued in April 1980, before the catastrophic blast and landslide on 18 May 1980. All extrusions except two from June 1980 to the end of 1984 were predicted on the basis of integrated geophysical, geochemical, and geologic monitoring. The two extrusions that were not predicted were preceded by explosions that removed a substantial part of the dome, reducing confining pressure and essentially short-circuiting the normal precursors.

Journal of Geodynamics↗
USGS1983

Predicting eruptions at Mount St. Helens, June 1980 through December 1982

Thirteen eruptions of Mount St. Helens between June 1980 and December 1982 were predicted tens of minutes to, more generally, a few hours in advance. The last seven of these eruptions, starting with that of mid-April 1981, were predicted between 3 days and 3 weeks in advance. Precursory seismicity, deformation of the crater floor and the lava dome, and, to a lesser extent, gas emissions provided telltale evidence of forthcoming eruptions. The newly developed capability for prediction reduced risk to life and property and influenced land-use decisions.

Washington↗
USGS1983

Seismic precursors to the Mount St. Helens eruptions in 1981 and 1982

Six categories of seismic events are recognized on the seismograms from stations in the vicinity of Mount St. Helens. Two types of high-frequency earthquakes occur near the volcano and under the volcano at depths of more than 4 kilometers. Medium- and low-frequency earthquakes occur at shallow depths (less than 3 kilometers) within the volcano and increase in number and size before eruptions. Temporal changes in the energy release of the low-frequency earthquakes have been used in predicting all the eruptions since October 1980. During and after eruptions, two types of low-frequency emergent surface events occur, including rockfalls and steam or gas bursts from the lava dome.

Washington↗
USGS1983

Deep earthquakes beneath Mount St. Helens: Evidence for magmatic gas transport?

Small-magnitude earthquakes began beneath Mount St. Helens 40 days before the eruption of 20 March 1982. Unlike earlier preeruption seismicity for this volcano, which had been limited to shallow events (less than 3 kilometers), many of these earthquakes were deep (between 5 and 11 kilometers). The location of these preeruptive events at such depth indicates that a larger volume of the volcanic system was affected prior to the 20 March eruption than prior to any of the earlier dome-building eruptions. The depth-time relation between the deep earthquakes and the explosive onset of the eruption is compatible with the upward migration of magmatic gas released from a separate deep reservoir.

Washington↗
USGS1978

Earthquake swarms and local crustal spreading along major strike-slip faults in California

Earthquake swarms in California are often localized to areas within dextral offsets in the linear trend in active fault strands, suggesting a relation between earthquake swarms and local crustal spreading. Local crustal spereading is required by the geometry of dextral offsets when, as in the San Andreas system, faults have dominantly strike-slip motion with right-lateral displacement. Three clear examples of this relation occur in the Imperial Valley, Coso Hot Springs, and the Danville region, all in California. The first two of these areas are known for their Holocene volcanism and geothermal potential, which is consistent with crustal spreading and magmatic intrusion. The third example, however, shows no evidence for volcanism or geothermal activity at the surface. ?? 1978 Birkha??user Verlag.

Pure and Applied Geophysics PAGEOPH↗