C. B. Dawson | USGS Science

USGS2005

Use of discrete-zone monitoring systems for hydraulic characterization of a fractured-rock aquifer at the University of Connecticut Landfill, Storrs, Connecticut, 1999 to 2002

The U.S. Geological Survey, in cooperation with the University of Connecticut, used a suite of hydraulic methods to characterize the hydrogeology of a fractured-rock aquifer near the former landfill and chemical-waste disposal pits at the University of Connecticut, Storrs, Connecticut. Multiple methods were used to determine head, driving potential, and transmissivity, including manual open-hole water-level and discretezone water-level measurements from 11 boreholes; continuous discrete-zone water-level measurements from 6 of the boreholes; estimated head and transmissivity for 11 boreholes using heat-pulse flowmeter profiles and pumping records; and differential head testing using a straddle-packer apparatus from 4 boreholes. These data were analyzed to identify and characterize relations between long-term water-level patterns and precipitation, topographic setting, contaminant distribution at the site, and a conceptual ground-water flow model. Data collected using the heat-pulse flowmeter, the straddle-packer apparatus, and discrete-zone monitoring (DZM) systems helped to establish, refine, and verify a conceptual model of ground-water flow in the study area. Monitoring of DZM systems installed in 11 boreholes provided a method for longterm monitoring of hydraulic head and water quality of the aquifer at fracture zones of different depths. These data were used to help define the conceptual site model for ground-water flow and to determine and explain the distribution of contamination. Hydrographs constructed for discretely isolated zones in the boreholes showed the magnitude of seasonal changes of water levels and driving potential in response to precipitation and drought. Heads in discrete zones and in different boreholes varied both in magnitude of response and in timing of response to precipitation. Water levels in open boreholes and in DZM systems showed a semi-diurnal pattern that coincides with gravimetric tidal plots generated for this area. No fluctuations that might indicate pumping were identified in the continuous water-level records. Lack of hydraulic response between boreholes during cross-hole testing in the area of the former chemical-waste disposal pits indicates poor hydraulic connection between the boreholes that were tested. In general, data indicated the presence of downward driving potentials in the recharge areas and in the area of the ground-water divide, and upward driving potentials in discharge areas north and south of the landfill. The results of this study illustrate the importance of discrete-zone isolation and monitoring in fractured-rock aquifers to prevent cross contamination while permitting head measurements and water-quality sampling that can be used to identify and characterize contamination or pathways for contaminant migration in a fractured-rock aquifer. Without DZM systems installed in the boreholes, only open-hole heads can be measured. The open-hole heads may be misleading when determining potential flow directions at contamination sites, because they are a composite of the heads associated with each of the fractures intersecting the borehole. The flowmeter tool and straddle-packer apparatus are effective screening tools for generating a snapshot of the hydraulic conditions, including vertical flow, transmissivity, and heads; however, they cannot prevent flow and potential cross-contamination and cannot easily be used to monitor long-term conditions. This work was conducted as part of a larger multidisciplinary investigation to characterize the nature and extent of contamination in the soil, surface water, and ground water in the overburden and fractured bedrock in the area of the landfill and former chemical-waste disposal pits near the University of Connecticut. The methods and hydraulic data presented in this report were used along with surface- and borehole-geophysical data and geochemical data to understand and characterize the ground-water flow in overburden and fractured bedrock; to assess possible chemical migration; to develop a site conceptual ground-water flow model; and to assess remediation alternatives.

Connecticut↗

USGS2002

An integrated surface-geophysical investigation of the University of Connecticut landfill, Storrs, Connecticut: 2000

A surface-geophysical investigation to characterize the hydrogeology and contaminant distribution of the former landfill area at the University of Connecticut in Storrs, Connecticut, was conducted in 2000 to supplement the preliminary hydrogeologic assessment of the contamination of soil, surface water, and ground water at the site. A geophysical-toolbox approach was used to characterize the hydrogeology and contaminant distribution of the former landfill. Two-dimensional direct-current resistivity, inductive terrain-conductivity, and seismic-refraction surface-geophysical data were collected and interpreted in an iterative manner with exploratory drilling, borehole geophysics, and hydraulic testing. In this investigation, a geophysical-toolbox approach was used to 1) further define previously identified conductive anomalies and leachate plumes; 2) identify additional leachate plumes, possible fracture zones, and (or) conductive lithologic layers in the bedrock; and 3) delineate bedrock-surface topography in the drainage valleys north and south of the landfill. Resistivity and terrain-conductivity surveys were used to further delineate previously identified geophysical anomalies to the north and southwest of the landfill. A conductive anomaly identified in the terrain-conductivity survey to the north of the landfill in 2000 had a similar location and magnitude as an anomaly identified in terrain-conductivity surveys conducted in 1998 and 1999. Collectively, these surveys indicated that the magnitude of the conductive anomaly decreased with depth and with distance from the landfill. These anomalies indicated landfill leachate in the overburden and shallow bedrock. Results of previous surface-geophysical investigations southwest of the landfill indicated a shallow conductive anomaly in the overburden that extended into the fractured-bedrock aquifer. This conductive anomaly had a sheet-like geometry that had a north-south strike, dipped to the west, and terminated abruptly about 450 feet southwest of the landfill. The sheet-like conductive anomaly was interpreted as a fractured, conductive lithologic feature filled with conductive fluids. To further delineate this anomaly, two two-dimensional resistivity profiles were collected west of the sheet-like conductive anomaly to assess the possibility that the sheet-like conductive anomaly continued to the west in its down-dip direction. Each of the north-south oriented resistivity profiles showed bullet-shaped rather than linear-shaped anomalies, with a relatively smaller magnitude of conductivity than the sheet-like conductive anomaly to the east. If these bullet-like features are spatially connected, they may represent a linear, or pipe-like, conductive anomaly in the bedrock with a trend of N290°E and a plunge of 12°. Additional surveys were conducted to assess the apparent southern termination of the sheet-like conductive feature. Terrain-conductivity surveys indicated the sheet-like feature was not continuous to the south. A two-dimensional resistivity line and a coincident terrain-conductivity profile indicated the presence of a steep, eastward dipping, low magnitude, electrically conductive anomaly on the eastern end of the profile. Although the sheet-like conductive anomaly apparently did not continue to the south, the survey conducted in 2000 identified an isolated, weak conductive anomaly south of the previously identified anomaly. Inductive terrain-conductivity surveys performed north of the sheet-like conductive anomaly and west of the landfill indicated the anomaly did not extend to the north into the area of the former chemical-waste disposal pits. No conductive plumes or conductive features were observed in the subsurface bedrock west of the landfill. A conductive anomaly was identified in the southern section of the new terrain-conductivity grid. The magnitude and distribution of the apparent conductivity of this anomaly was identified as a nearly vertical sheet-like conductive feature. The anomaly extended north-south for 150 feet, and the depth and (or) magnitude of the conductive anomaly decreased towards the south. Based on the location, orientation, and dip, this feature was interpreted as a separate anomaly rather than as a continuation of the sheet-like, conductive bedrock feature that was previously identified southwest of the landfill. No other new conductive anomalies were identified south or west of the landfill. Seismic-refraction surveys were used to delineate the depth to the water table and the depth and topography of the bedrock surface. The seismic-refraction surveys at the northern and southern ends of the landfill confirm the presence of shallow bedrock at 25 feet below land surface. Seismic-refraction surveys conducted southwest of the landfill in a minor topographic valley indicate the bedrock is about 10 feet below land surface.

Connecticut↗