USGS Science⌕ Search

Geology topics

B. M. Richmond

Publications and source records attributed to B. M. Richmond.

At least 19 recordsLinked to original sources
USGS2011

Recent storm and tsunami coarse-clast deposit characteristics, southeast Hawai'i

Deposits formed by extreme waves can be useful in elucidating the type and characteristics of the depositional event. The study area on the southeast coast of the island of Hawaiʻi is characterized by the presence of geologically young basalts of known age that are mantled by recent wave-derived sedimentary deposits. The area has been impacted by large swells, storms and tsunamis over the last century, and in combination with known substrate ages makes this an ideal location to study recent deposits produced by such events. Three distinct coarse-clast deposit assemblages can be recognized based on clast size, composition, angularity, orientation, packing, elevation and inland distance of the deposit. These deposits are characterized as one of three types. 1) Gravel fields of isolated clasts, primarily boulder-size material, and scattered pockets of concentrated sand and gravel in topographic lows. 2) Shore-parallel and cuspate ridges composed mostly of rounded basalt gravel and sand with small amounts of carbonate detritus. The ridges range in height from about 1 to 3 m and are 10s of m wide. 3) Cliff-top deposits of scattered angular and sub-angular clasts along sea cliffs that are generally greater than 5 m elevation. The gravel fields are primarily of tsunami origin from either the 1975 Kalapana event, or a combination of the 1975 tsunami, and 1868 tsunami or earlier events. The ridge deposits are presently active and sediment continues to be added during high wave events. The cliff-top deposits contain evidence of deposition by both tsunami and storm processes and require further investigation.

Hawai'i↗
USGS2011

Geological effects and implications of the 2010 tsunami along the central coast of Chile

Geological effects of the 2010 Chilean tsunami were quantified at five near-field sites along a 200 km segment of coast located between the two zones of predominant fault slip. Field measurements, including topography, flow depths, flow directions, scour depths, and deposit thicknesses, provide insights into the processes and morphological changes associated with tsunami inundation and return flow. The superposition of downed trees recorded multiple strong onshore and alongshore flows that arrived at different times and from different directions. The most likely explanation for the diverse directions and timing of coastal inundation combines (1) variable fault rupture and asymmetrical slip displacement of the seafloor away from the epicenter with (2) resonant amplification of coastal edge waves. Other possible contributing factors include local interaction of incoming flow and return flow and delayed wave reflection by the southern coast of Peru. Coastal embayments amplified the maximum inundation distances at two sites (2.4 and 2.6 km, respectively). Tsunami vertical erosion included scour and planation of the land surface, inundation scour around the bases of trees, and channel incision from return flow. Sheets and wedges of sand and gravel were deposited at all of the sites. Locally derived boulders up to 1 m in diameter were transported as much as 400 m inland and deposited as fields of dispersed clasts. The presence of lobate bedforms at one site indicates that at least some of the late-stage sediment transport was as bed load and not as suspended load. Most of the tsunami deposits were less than 25 cm thick. Exceptions were thick deposits near open-ocean river mouths where sediment supply was abundant. Human alterations of the land surface at most of the sites provided opportunities to examine some tsunami effects that otherwise would not have been possible, including flow histories, boulder dispersion, and vegetation controls on deposit thickness.

Central Coast↗
USGS2008

Coarse-clast ridge complexes of the Caribbean: A preliminary basis for distinguishing tsunami and storm-wave origins

Coastal gravel-ridge complexes deposited on islands in the Caribbean Sea are recorders of past extreme-wave events that could be associated with either tsunamis or hurricanes. The ridge complexes of Bonaire, Jamaica, Puerto Rico (Isla de Mona), and Guadeloupe consist of polymodal clasts ranging in size from sand to coarse boulders that are derived from the adjacent coral reefs or subjacent rock platforms. Ridge-complex morphologies and crest elevations are largely controlled by availability of sediments, clast sizes, and heights of wave runup. The ridge complexes are internally organized, display textural sorting and a broad range of ages including historical events. Some display seaward-dipping beds and ridge-and-swale topography, and some terminate in fans or steep avalanche slopes. Together, the morphologic, sedimentologic, lithostratigraphic, and chronostratigraphic evidence indicates that shore-parallet ridge complexes composed of gravel and sand that are tens of meters wide and several meters thick are primarily storm-constructed features that have accumulated for a few centuries or millennia as a result of multiple high-frequency intense-wave events. They are not entirely the result of one or a few tsunamis as recently reported. Tsunami deposition may account for some of the lateral ridge-complex accretion or boulder fields and isolated blocks that are associated with the ridge complexes. Copyright ?? 2008, SEPM (Society for Sedimentary Geology).

Journal of Sedimentary Research↗
USGS2006

Dolomitization of Quaternary reef limestones, Aitutaki, Cook Islands

Six holes were drilled to depths of 30–69 m in the shallow lagoon of Aitutaki in the southern Cook Islands. One hole encountered pervasively dolomitized reef limestones at 36 m subbottom depth, which extended to the base of the drilled section at 69·3 m. This hole was drilled near the inner edge of the present barrier reef flat on the flank of a seismically defined subsurface ridge. Both the morphology and biofacies indicate that this ridge may represent an outer reef crest. Mineralogy, porosity and cementation change in concert downhole through three zones. Zone 1, 0–9 m, is composed of primary skeletal aragonite and calcite with minor void-filling aragonite and magnesian calcite cement of marine phreatic origin. Zone 2, 9–36 m, is composed of replacement calcite and calcite cement infilling intergranular, intragranular, mouldic and vuggy porosity. Stable isotopes (mean δ 18 O=—5·4‰ PDB for carbonate; δD =—50‰ SMOW for fluid inclusions) support the petrographic evidence indicating that sparry calcite cements formed in predominantly freshwater. Carbon isotope values of —4·0 to —11·0‰ for calcite indicate that organic matter and seawater were the sources of carbon. Zone 3, 36–69·3 m, is composed of replacement dolostone, consisting of protodolomite with, on average, 7 mol% excess CaCO 3 and broad and weak ordering X-ray reflections at 2·41 and 2·54 A. The fine-scale replacement of skeletal grains and freshwater void-filling cements by dolomite did not significantly reduce porosity. Stable isotopes (mean δ 18 O=+2·6‰ 0 PDB for dolomite; maximum δD =—27‰ SMOW for fluid inclusions) and chemical composition indicate that the dolomite probably formed from seawater, although formation in the lower part of a mixed freshwater-seawater zone, with up to 40% freshwater contribution, cannot be completely ruled out. The carbon (δ 13 C=2·7‰) and magnesium were derived from seawater. Low-temperature hydrothermal iron hydroxides and associated transition metals occur in void space in several narrow stratigraphic intervals in the limestone section that was replaced by dolomite. The entire section of dolomite is also enriched in these transition metals. The metals dispersed throughout the dolostone section were introduced at the time of dolomitization by a different and later episode of hydrothermal circulation than the one(s) that produced the localized deposits near the base of the section. The primary reef framework is considered to have been deposited during several highstands of sea level. Following partial to local recrystallization of the limestone, a single episode of dolomitization occurred. Both tidal and thermal pumping drove large quantities of seawater through the porous rocks and perhaps maintained a wide mixing zone. However, the isotopic, geochemical and petrographic data do not clearly indicate the extent of seawater mixing.

Sedimentology↗
USGS2006

Shelf stratigraphy and the influence of antecedent substrate on Holocene reef development, south Oahu, Hawaii

Paired analyses of drill cores and high-resolution seismic reflection data show that development of Holocene framework reefs on the Oahu (Hawaii) shelf is limited to settings of low wave energy and to the period 8000 to 3000 yr BP. A prominent bounding surface that is mapped across much of the Oahu shelf is an erosion surface cut into Marine Isotope Stages 5 and 7 limestones that show extensive loss of primary porosity, aragonite, and MgCO3 owing to meteoric and vadose-zone diagenesis. This acoustic reflector is found exposed at the surface where wave energy is high or in the shallow subsurface below Holocene reef and sand sheet deposits where energy is low. Ship-towed video along 30 km of the shelf reveals a steady decrease in limestone accumulation from offshore of Honolulu southeast to Koko Head where the seafloor is characterized by volcanic pavement and/or thin sand deposits. This may reflect the build-up of late Pleistocene volcanics associated with the Hanauma Bay eruption (30,000-7000 yr BP) that now comprise the substrate in depths shallow enough to limit reef accretion. The absence of significant Holocene reef build-up on the south Oahu shelf is consistent with observations from north-facing coasts that lack Holocene reefs, indicating that Holocene reef formation in Hawaii is complex and patchy.

Hawaii↗
USGS2006

Geologic impacts of the 2004 Indian ocean tsunami on Indonesia, Sri Lanka, and the Maldives

The December 26, 2004 Indian Ocean tsunami was generated by a large submarine earthquake (magnitude ???9.1) with an epicenter located under the seafloor in the eastern Indian Ocean near northern Sumatra, Indonesia. The resulting tsunami was measured globally and had significant geologic impacts throughout the Indian Ocean basin. Observations of tsunami impacts, such as morphologic change, sedimentary deposits, and water-level measurements, are used to reconstruct tsunamogenic processes. Data from Sumatra, Sri Lanka, and the Maldives provide a synoptic view of tsunami characteristics from a wide range of coastal environments both near- and far-field from the tsunami origin. Impacts to the coast as a result of the tsunami varied depending upon the height of the wave at impact, orientation of the coast with regard to direction of wave approach, and local topography, bathymetry, geology, and vegetation cover. Tsunami deposits were observed in all the countries visited and can be generally characterized as relatively thin sheets (<80 cm), mostly of sand. ?? 2006 Gebru??der Borntraeger.

Conference Paper↗
USGS2005

Possible modes of coral-reef development at Molokai, Hawaii, inferred from seismic-reflection profiling

High-resolution, seismic-reflection data elucidate the late Quaternary development of the largest coral-reef complex in the main Hawaiian Islands. Six acoustic facies were identified from reflection characteristics and lithosome geometry. An extensive, buried platform with uniformly low relief was traced beneath fore-reef and marginal shelf environments. This highly reflective surface dips gently seaward to ???130 m depth and locally crops out on the seafloor. It probably represents a wave-cut platform or ancient reef flat. We propose alternative evolutionary models, in which sea-level changes have modulated the development of reef systems, to explain the observed stratigraphic relationships. The primary difference between the models is the origin of the underlying antecedent surface, which arguably could have formed during either regression/lowstand or subsequent transgression.

Hawai'i↗
USGS2000

Beach profile variation on Hawaiian carbonate beaches

Beach profiles from selected Oahu and Maui beaches quantitatively document beach volume variation and change between 1994 and 1999. Along exposed, high-energy beaches, large fluctuations in beach volume, characterized primarily by the formation and erosion of extensive berms, dominate the seasonal changes. Beaches along more protected stretches of coastline show much less variation in profile morphology. Beaches on the west (leeward) coast of Oahu experienced the most seasonal variation in profile volume, followed by the north shore, east (windward) shore, and south shore. Similar to Oahu, beaches along the west coast of Maui showed the greatest overall profile variation. However, the mean variation for profiles along a single coastal reach showed little difference compared to other coastal segments. Although some beaches showed net gain or loss during the study period, most beaches remained relatively stable with change limited to a finite envelope. No island-wide trends in beach erosion or accretion were observed during the study period. However, no extreme events, such as tropical storms or hurricanes, directly influenced the Hawaiian Islands during the study period. This data set should therefore be considered as representative of typical annual beach activity. Greater variation and possible long-term change would be expected during extreme events.

Conference Paper↗
USGS2000

Overview of Pacific Island carbonate beach systems

Beach systems in Pacific Islands are Holocene deposits of reef-dervied and terrigenous sediment. Thus, geologic setting is important in determining the success at which beach systems are established. Generally, older islands exhibit better beach system development. Although modern beach systems are composed of Holocene sediment, development of suitable accommodation space requires more geologic time.

Conference Paper↗
USGS1999

Standing crop and sediment production of reef-dwelling foraminifera on O'ahu, Hawai'i

Most of O'ahu's nearshore and beach sands are highly calcareous and of biogenic origin. The pale-colored constituent grains are the eroded remains of carbonate shells and skeletons produced by marine organisms living atop the island's fringing reefs and in the shallow waters near shore. Previous studies have shown that the tests of symbiont-bearing benthic foraminifera compose a substantial portion (up to one-fourth) of these organically produced sands. We sampled a variety of reef flat and slope habitats to obtain standing-crop data and production estimates for several sand-producing genera of reef-dwelling foraminifera. We found that modern communities of these shelled protists occur in dense numbers islandwide, reaching densities up to 105 individuals per square meter of suitable substrate in the more productive habitats. Further research on the contribution of foraminifera to beach, nearshore, and offshore sands is planned for O'ahu and neighboring islands to describe their roles in the sediment budget more completely.

Pacific Science↗
USGS1998

The Holocene sea-level highstand in the equatorial Pacific: Analysis of the insular paleosea-level database

A review of the literature provides 92 estimates of the middle to late Holocene sea-level highstand on Pacific Islands. These data generally support geophysical model calculations that predict a +1 to 3 m relative sea-level highstand on oceanic islands due to the Earth’s rheological response to the melting of the last continental ice sheets and subsequent redistribution of meltwater. Both predictions and observations indicate sea level was higher than present in the equatorial Pacific between 5000 and 1500 y B.P. A non-linear relationship exists between the age and elevation of the highstand peak, suggesting that different rates of isostatic adjustment may occur in the Pacific, with the highest rates of sea-level fall following the highstand near the equator. It is important to resolve detailed sea-level histories from insular sites to test and refine models of climatic, oceanographic, and geophysical processes including hydroisostasy, equatorial ocean siphoning, and lithospheric flexure that are invoked as mechanisms affecting relative sea-level position. We use a select subset of the available database meeting specific criteria to examine model relationships of paleosea-surface topography. This new evaluated database of paleosea-level positions is also validated for testing and constraining geophysical model predictions of past and present sea-level variations.

Coral Reefs↗
USGS1998

Slope failure and shoreline retreat during northern California's latest El Nino

Surface processes accelerated by severe storms during the 1997–1998 El Niño event scoured hillsides and damaged property across coastal California. Technological advances such as digital mapping, exemplified here for the San Francisco Bay area but applicable elsewhere, have enabled government agencies to better describe, monitor, and predict the effects of shoreline erosion and slope failure.

California↗
USGS1988

Coarse-sediment bands on the inner shelf of southern Monterey Bay, California

Bands of coarse sand that trend parallel to the shore, unlike the approximately shore-normal bands found in many inner shelf areas, occur in southern Monterey Bay at water depths of 10–20 m, less than 1 km from the shore. The bands are 20–100 m wide and alternate with bands of fine sand that are of similar width. The coarse-sand bands are as much as 1 m lower than the adjacent fine-sand bands, which have margins inclined at angles of about 20°. The mean grain sizes of the coarse and fine sand are in the range of 0.354–1.0 mm and 0.125–0.354 mm, respectively. Wave ripples that average about 1 m in spacing always occur in the coarse-sand bands.

Marine Geology↗
USGS1983

Storm-controlled oblique dunes of the Oregon coast

The large (mean height 25 m, spacing 300 m), relatively straight-crested dunes of the central Oregon coast migrate an average of 3.8 m/yr toward an azimuth of 26°. The dunes are transverse to the strong, south-southwesterly winter storm winds that are responsible for their basic form, orientation, and migration. The dry, moderate, north-northwesterly summer winds modify the dune form but not the dune trend. Comparison of the sand transport calculated from wind data and the transport measured from dune migration indicates that the actual transport by the wet southerly winds is only one-third of the amount calculated assuming dry conditions. The resultant (vector-mean) transport rate, as recalculated by comparison of the measured and initially calculated rates, is 34 m 3 /m·yr toward an azimuth of 45°. The dunes are thus oblique by our definition of an oblique dune (angle between dune trend and resultant transport direction between 15° and 75°). The internal structures of the dunes confirm northward migration during wet conditions. Evidence for deposition during wet conditions includes slipface deposits deformed mostly by sliding and various structures formed by the adhesion of sand grains to wet surfaces. Most summer deposits are not preserved, but those on the basal apron (the gentle north slope at the base of the winter slipface) have a high preservation potential. A depositional model based on dune climbing predicts that the preserved record of oblique dunes formed by an obtuse-bimodal wind regime would consist of tabular sets of crossbeds in which the dip angles increase upward from the base of each set.

Oregon↗