USGS Science⌕ Search

Geology topics

A. W. Ward

Publications and source records attributed to A. W. Ward.

At least 19 recordsLinked to original sources
USGS2012

Global map of eolian features on Mars

Ten basic categories of eolian features on Mars were identified from a survey of Mariner 9 and Viking orbiter images. The ten features mapped are (1) light streaks (including frost streaks), (2) dark streaks, (3) sand sheets or splotches, (4) barchari dunes, (5) transverse dunes, (6) crescentic dunes, (7) anomalous dunes, (8) yardangs, (9) wind grooves, and (10) deflation pits. The features were mapped in groups, not as individual landforms, and recorded according to their geographic positions and orientations on maps of 1:12.5 million or 1:25 million scale. In the north polar region, light and dark streaks indicate winds from the west and northwest. Frost streaks show northeast and northwest winds. Barchan dunes show southwest and west winds. Transverse dunes show east and west winds. Local erosional features show winds from the northwest or southeast and northeast or southwest. In the middle and low northern latitudes, streaks show northeast winds; yardangs and deflation pits show mostly easterly and northeasterly winds. In the low southern latitudes, light streaks and dunes record northwest and northeast winds; dark streaks record southeast winds. In high southern latitudes, most streaks and dunes record southeast and east winds. In the south polar region, light and frost streaks record southwest and northwest winds, whereas dark streaks and transverse dunes show southeast winds. The patterns recorded for ephemeral features conform to global conditions of strong southern spring and summer (northern fall and winter) wind circulation. Erosional features in bedrock indicate long-term and perhaps ancient wind trends, whereas depositional features may record relatively more recent winds. Wind directions indicated by yardangs, pits, and other erosional features seldom correspond to those shown by streaks. These erosional features indicating winds of different directions than those that formed the streaks may have been carved when the effective regional winds on Mars were different due to relative hemisphere insolation differences, which are related to obliquity variations. Alternatively, many yardangs and pits may be largely controlled by structure and carved along surface structural patterns or features that channeled both ancient and present-day winds. Deflation pits in the mantled terrain may contain the best record of ancient wind trends. These pits seem to have stratigraphically related orientations. Different stratigraphic units composing the mantle contain wind erosion pits that possibly record large-scale wind direction changes because of long-term changes in the obliquity of the Mars.

Journal of Geophysical Research Solid Earth↗
USGS2003

Aeolian processes in Proctor Crater on Mars: Sedimentary history as analyzed from multiple data sets

Proctor Crater is a 150 km diameter crater in Noachis Terra, within the southern highlands of Mars. The analysis leading to the sedimentary history incorporates several data sets including imagery, elevation, composition, and thermal inertia, mostly from the Mars Global Surveyor mission. The resulting stratigraphy reveals that the sedimentary history of Proctor Crater has involved a complex interaction of accumulating and eroding sedimentation. Aeolian features spanning much of the history of the crater interior dominate its surface, including large erosional pits, stratified beds of aeolian sediment, sand dunes, erosional and depositional streaks, dust devil tracks, and small bright bed forms that are probably granule ripples. Long ago, up to 450 m of layered sediment filled the crater basin, now exposed in eroded pits on the crater floor. These sediments are probably part of an ancient deposit of aeolian volcaniclastic material. Since then, some quantity of this material has been eroded from the top layers of the strata. Small, bright dune forms lie stratigraphically beneath the large dark dune field. Relative to the large dark dunes, the bright bed forms are immobile, although in places, their orientations are clearly influenced by the presence of the larger dunes. Their prevalence in the crater and their lack of compositional and thermal distinctiveness relative to the crater floor suggests that these features were produced locally from the eroding basin fill. Dust devil tracks form during the spring and summer, following a west-southwesterly wind. Early in the spring the dust devils are largely restricted to dark patches of sand. As the summer approaches, dust devil tracks become more plentiful and spread to the rest of the crater floor, indicating that the entire region acquires an annual deposit of dust that is revealed by seasonal dust devils. The dark dunes contain few dust devil tracks, suggesting that accumulated dust is swept away directly by saltation, rather than by the passage of dust devils. Spectral deconvolution indicates that the dark dunes have infrared spectra consistent with basalt-like materials. The average thermal inertia calculated from Thermal Emission Spectrometer bolometric temperatures is 277 ?? 17 J m-2 s-0.5 K-1, leading to an effective grain size of 740 ?? 170 ??m, which is consistent with coarse sand and within the range expected for Martian sand. The coarse sand that composes the large dune field may have originated from outside the crater, saltating in from the southwest. Most of the transport pathway that delivered this sand to the dune field has since been eroded away or buried. The sand was transported to the east center of the crater floor, where beneath the present-day dunes a 50 m high mound of sand has accumulated. Dune slip faces indicate a wind regime consisting of three opposing winds. Some of these wind directions are correlated with the orientations of dust devil tracks and bright bed forms. The combination of a tall mound of sand and three opposing winds is consistent with a convergent wind regime, which produces the large reversing transverse and star dunes that dominate the dune field. The dark dunes have both active slip faces and seemingly inactive slip faces, suggesting that the dunes vary spatially in their relative activity. Nevertheless, the aeolian activity that has dominated the history of Proctor Crater still continues today. Copyright 2003 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗
USGS1999

Digital photogrammetric analysis of the IMP camera images: Mapping the Mars Pathfinder landing site in three dimensions

This paper describes our photogrammetric analysis of the Imager for Mars Pathfinder data, part of a broader program of mapping the Mars Pathfinder landing site in support of geoscience investigations. This analysis, carried out primarily with a commercial digital photogrammetric system, supported by our in‐house Integrated Software for Imagers and Spectrometers (ISIS), consists of three steps: (1) geometric control: simultaneous solution for refined estimates of camera positions and pointing plus three‐dimensional (3‐D) coordinates of ∼10 3 features sitewide, based on the measured image coordinates of those features; (2) topographic modeling: identification of ∼3×10 5 closely spaced points in the images and calculation (based on camera parameters from step 1) of their 3‐D coordinates, yielding digital terrain models (DTMs); and (3) geometric manipulation of the data: combination of the DTMs from different stereo pairs into a sitewide model, and reprojection of image data to remove parallax between the different spectral filters in the two cameras and to provide an undistorted planimetric view of the site. These processes are described in detail and example products are shown. Plans for combining the photogrammetrically derived topographic data with spectrophotometry are also described. These include photometric modeling using surface orientations from the DTM to study surface microtextures and improve the accuracy of spectral measurements, and photoclinometry to refine the DTM to single‐pixel resolution where photometric properties are sufficiently uniform. Finally, the inclusion of rover images in a joint photogrammetric analysis with IMP images is described. This challenging task will provide coverage of areas hidden to the IMP, but accurate ranging of distant features can be achieved only if the lander is also visible in the rover image used.

Journal of Geophysical Research E: Planets↗
USGS1999

Digital mapping of the Mars Pathfinder landing site: Design, acquisition, and derivation of cartographic products for science applications

The Imager for Mars Pathfinder (IMP) acquired more than 16,000 images and provided panoramic views of the surface of Mars at the Mars Pathfinder landing site in Ares Vallis. This paper describes the stereoscopic, multispectral IMP imaging sequences and focuses on their use for digital mapping of the landing site and for deriving cartographic products to support science applications of these data. Two‐dimensional cartographic processing of IMP data, as performed via techniques and specialized software developed for ISIS (the U.S. Geological Survey image processing software package), is emphasized. Cartographic processing of IMP data includes ingestion, radiometric correction, establishment of geometric control, coregistration of multiple bands, reprojection, and mosaicking. Photogrammetric processing, an integral part of this cartographic work which utilizes the three‐dimensional character of the IMP data, supplements standard processing with geometric control and topographic information [ Kirk et al. , this issue]. Both cartographic and photogrammetric processing are required for producing seamless image mosaics and for coregistering the multispectral IMP data. Final, controlled IMP cartographic products include spectral cubes, panoramic (360° azimuthal coverage) and planimetric (top view) maps, and topographic data, to be archived on four CD‐ROM volumes. Uncontrolled and semicontrolled versions of these products were used to support geologic characterization of the landing site during the nominal and extended missions. Controlled products have allowed determination of the topography of the landing site and environs out to ∼60 m, and these data have been used to unravel the history of large‐ and small‐scale geologic processes which shaped the observed landing site. We conclude by summarizing several lessons learned from cartographic processing of IMP data.

Journal of Geophysical Research E: Planets↗
USGS1999

General geology and geomorphology of the Mars Pathfinder landing site

The Mars Pathfinder (MPF) spacecraft landed on relatively young (late Hesperian-early Amazonian; 3.1-0.7 Ga) plains in Chryse Planitia near the mouth of Ares Vallis. Images returned from the spacecraft reveal a complex landscape of ridges and troughs, large hills and crater rims, rocks and boulders of various sizes and shapes, and surficial deposits, indicating a complex, multistage geologic history of the landing site. After the deposition of one or more bedrock units, depositional and erosional fluvial processes shaped much of the present landscape. Multiple erosional events are inferred on the basis of observations of numerous channels, different orientations of many streamlined tails from their associated knobs and hills, and superposition of lineations and streamlines. Medium- and small-scale features, interpreted to be related to late-stage drainage of floodwaters, are recognized in several areas at the landing site. Streamlined knobs and hills seen in Viking orbiter images support this inference, as they seem to be complex forms, partly erosional and partly depositional, and may also indicate a series of scouring and depositional events that, in some cases, further eroded or partially buried these landforms. Although features such as these are cited as evidence for catastrophic flooding at Ares Vallis, some of these features may also be ascribed to alternative primary or secondary depositional processes, such as glacial or mass-wasting processes. Close inspection of the landing site reveals rocks that are interpreted to be volcanic in origin and others that may be conglomeratic. If such sedimentary rocks are confirmed, fluvial processes have had a greater significance on Mars than previously thought. For the last several hundred million to few billion years, eolian processes have been dominant. Dunes and dune-like features, ventifacts, and deflation and exhumation features around several rocks probably are the most recent landforms. The relatively pristine nature of the overall landscape at the MPF site suggests weathering and erosion processes on Mars are exceptionally slow.

Journal of Geophysical Research E: Planets↗
USGS1999

Ventifacts at the Pathfinder landing site

About half of the rocks at the Mars Pathfinder Ares Vallis landing site appear to be ventifacts, rocks abraded by windborne particles. Comparable resolution images taken by the Imager for Mars Pathfinder (IMP) camera and the Viking landers show that ventifacts are more abundant at the Pathfinder site. The ventifacts occur in several forms, including rocks with faceted edges, finger‐like projections, elongated pits, flutes, grooves, and possible rills. The trends of elongated pits, flutes, grooves, and rills cluster at ∼280–330° clockwise from north and generally dip 10–30° away from their trend direction. These orientations are indicative of southeast to northwest winds and differ from the trend of wind tails at the landing site, the direction of local wind streaks, and predictions of the Global Circulation Model, all of which indicate northeast to southwest winds. The disparity between these data sets strongly suggests that local circulation patterns have changed since the abrasion of the ventifacted rocks. The greater number of ventifacts at the Pathfinder site compared to either of the Viking sites is most easily explained as being due to a larger supply of abrading particles, composed of either sand‐sized grains or indurated dust aggregates, and higher surface roughness, which should increase the momentum of saltating grains. The Pathfinder ventifacts may have formed shortly after the deposition of outflow channel sediments nearly 2 Gry ago, when a large local supply of abrading particles should have been abundant and atmospheric conditions may have been more conducive to rock abrasion from saltating grains. Based on how ventifacts form on Earth, the several ventifact forms seen at the Pathfinder site and their presence on some rocks but not on others are probably due to local airflow conditions, original rock shape, exposure duration, rock movement, and to a lesser extent, rock lithology. The abundance of ventifacts at the Pathfinder site, together with other evidence of weathering, indicates that unaltered rock surfaces are rare on Mars.

Journal of Geophysical Research E: Planets↗
USGS1999

Overview of the Mars Pathfinder Mission: Launch through landing, surface operations, data sets, and science results

Mars Pathfinder successfully landed at Ares Vallis on July 4, 1997, deployed and navigated a small rover about 100 m clockwise around the lander, and collected data from three science instruments and ten technology experiments. The mission operated for three months and returned 2.3 Gbits of data, including over 16,500 lander and 550 rover images, 16 chemical analyses of rocks and soil, and 8.5 million individual temperature, pressure and wind measurements. Path‐finder is the best known location on Mars, having been clearly identified with respect to other features on the surface by correlating five prominent horizon features and two small craters in lander images with those in high‐resolution orbiter images and in inertial space from two‐way ranging and Doppler tracking. Tracking of the lander has fixed the spin pole of Mars, determined the precession rate since Viking 20 years ago, and indicates a polar moment of inertia, which constrains a central metallic core to be between 1300 and ∼2000 km in radius. Dark rocks appear to be high in silica and geochemically similar to anorogenic andesites; lighter rocks are richer in sulfur and lower in silica, consistent with being coated with various amounts of dust. Rover and lander images show rocks with a variety of morphologies, fabrics and textures, suggesting a variety of rock types are present. Rounded pebbles and cobbles on the surface as well as rounded bumps and pits on some rocks indicate these rocks may be conglomerates (although other explanations are also possible), which almost definitely require liquid water to form and a warmer and wetter past. Air‐borne dust is composed of composite silicate particles with a small fraction of a highly magnetic mineral, interpreted to be most likely maghemite; explanations suggest iron was dissolved from crustal materials during an active hydrologic cycle with maghemite freeze dried onto silicate dust grains. Remote sensing data at a scale of a kilometer or greater and an Earth analog correctly predicted a rocky plain safe for landing and roving with a variety of rocks deposited by catstrophic floods, which are relatively dust free. The surface appears to have changed little since it formed billions of years ago, with the exception that eolian activity may have deflated the surface by ∼3–7 cm, sculpted wind tails, collected sand into dunes, and eroded ventifacts (fluted and grooved rocks). Pathfinder found a dusty lower atmosphere, early morning water ice clouds, and morning near‐surface air temperatures that changed abruptly with time and height. Small scale vortices, interpreted to be dust devils, were observed repeatedly in the afternoon by the meteorology instruments and have been imaged.

Journal of Geophysical Research E: Planets↗
USGS1984

Evolution of the yardangs at Rogers Lake, California

Yardangs are streamlined, wind-eroded hills common to most deserts. Yardangs at Rogers Lake, Mojave Desert, California, have streamlined forms characteristic of objects eroded by moving fluids, a teardrop shape that approaches an ideal 1:4 width-to-length ratio. In wind-tunnel simulations, miniature forms of various shapes changed sequentially by (1) erosion of the windward corners, (2) erosion of the windward slope, (3) erosion of the leeward corners and flanks, and (4) erosion of the leeward slope. Prominent mechanisms in yardang evolution apparently are abrasion at the windward end and deflation and reverse air flow near the middle and at the downstream end. Width-to-length ratios of yardangs are grossly similar to those of some fluvial and glacial streamlined landforms. The low kinetic energy of wind relative to ice and water, the erosional resistance to wind of most rocks, the rarity of long-term, unidirectional winds, and the presence of running water, topographic roughness, and vegetation all limit the abundance of yardangs.

Geological Society of America Bulletin↗